Outside Micrometers - Page 48

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 293-832-30CAL

Includes a Mitutoyo Certificate of Calibration that these tools have been calibrated and meet the ISO/IEC 17025 International Standard for testing and calibration laboratories. Ingress Protection certified IP65 for protection against dust and water.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 293-140

The Mitutoyo 293 series QuantuMike Coolant Proof LCD micrometer has a digital single-value LCD readout that displays in metric units with resolution to 0.001mm. A ratchet thimble mechanism helps provide uniform pressure for precise, repeatable measurement. It also has a non-rotating spindle that helps provide steady positioning during measurement, and a QuantuMike spindle that feeds at a rate of 2mm per revolution for a higher rate of productivity than a conventional mechanism. It uses the Mitutoyo ABSOLUTE electrostatic capacitance linear encoder to help prevent overspeed errors and help ensure repeatable, precise measurement.The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. Depending on the model, an output jack transmits Statistical Process Control (SPC) data results to a computer or external device through an interface cable (sold separately). The micrometer has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior d...

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe 599-78 five-piece micrometer set includes five outside diameter micrometer measuring rods and setting standards, for the convenience of multiple sizes in one pack. They are capable of calibrating micrometers and zeroing Vernier, dial, and digital calipers, for versatility. The rods are 1/4" diameter with flat ends, and cover 1” - 5” in 1” increments. Micrometers are used widely for precise measurement of small distances including outside diameters. Rods are used to set and calibrate micrometers. They are commonly used in mechanical engineering and machining, as well as most mechanical trades, to accurately measure parts. Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001 and is headquartered in North Kingstown, RI.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 314-262-10

The Mitutoyo V-Anvil LCD micrometer has a V-anvil for direct outside diameter (OD) measurement of three-flute taps, milling cutters, and reamers, or out-of-roundness from centerless grinding or other machining operations. It also has a digital single-value LCD readout that displays in inch and metric units with resolution to 0.001mm, and Statistical Process Control (SPC) data output to transmit results to a computer or external device. The output jack transmits SPC results to a computer through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurement at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. The spindle is carbide-tipped for wear resistance. The micrometer’s ratchet-stop mechanism helps provide uniform pressure for precise, repeatable measurements. A spindle lock helps provide secure locking of the measurement position. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Starrett Brand: Starrett Model: 3732XFL-1-AMZN

The Starrett Electronic Micrometer is a full-featured precision measuring tool built with customary Starrett quality and workmanship. The includes a large, easy-to-read, high-contrast LCD digital readout for clear readings. With its automatic OFF functionality, smooth friction thimble for uniform pressure, and balanced frame design, Starrett products provide comfortable and accurate measuring Its no-glare satin chrome finish minimizes annoying surface glare under bright lights indoors or filters out UV light.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Model: 599-1-31

The Brown & Sharpe chrome-framed outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a convertible friction drive thimble mechanism for uniform or variable pressure during adjustment, and tungsten carbide faces for wear resistance.The micrometer’s frame, thimble, and sleeve have a satin chrome rust- and glare-resistant finish. Frames with a base measurement range greater than or equal to 1” are heat-insulated to help reduce temperature-related expansion or contraction. The vernier scale on the thimble and sleeve is graduated to 0.0001”. Depending on the model, graduation markings on the barrel may be straight or slanted to help reduce parallax errors when reading. The ratchet mechanism can be disabled for variable adjustment control. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. /p>Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: iGaging Brand: iGaging Model: 35-070-B01

Blade micrometer is used for measuring where the standard micrometer spindle could not be accommodated. Igaging 0-1" digital quick micrometer absolute origin speedmic snap lever action gage igaging absolute origin speedmic uses the absolute encoding technology in which the sensor memorizes and traces an absolute origin zero position. Quickly measure with Super high precision lever activated - fully opens and closes in less than one second! linear moving sensor provides accurate and reliable measurements IP65 coolant proof measuring range: 0-1"/0-25MM Carbide tipped spindle resolution: 0.00005"/0.001mm accuracy: ±0.00015"/0.003mm fixed thimble. Spc/USB data output available (not included) search Amazon for item: b00inl0ba2. Ball attachment included. Case included 2 years warranty.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 293-145

The Mitutoyo 293 series QuantuMike Coolant Proof LCD micrometer has a digital single-value LCD readout that displays in metric units with resolution to 0.001mm. A ratchet thimble mechanism helps provide uniform pressure for precise, repeatable measurement. It also has a non-rotating spindle that helps provide steady positioning during measurement, and a QuantuMike spindle that feeds at a rate of 2mm per revolution for a higher rate of productivity than a conventional mechanism. It uses the Mitutoyo ABSOLUTE electrostatic capacitance linear encoder to help prevent overspeed errors and help ensure repeatable, precise measurement.The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. Depending on the model, an output jack transmits Statistical Process Control (SPC) data results to a computer or external device through an interface cable (sold separately). The micrometer has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior d...

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe chrome-framed outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a convertible friction drive thimble mechanism for uniform or variable pressure during adjustment, and tungsten carbide faces for wear resistance.The micrometer’s frame, thimble, and sleeve have a satin chrome rust- and glare-resistant finish. Frames with a base measurement range greater than or equal to 1” are heat-insulated to help reduce temperature-related expansion or contraction. The vernier scale on the thimble and sleeve is graduated to 0.0001”. Depending on the model, graduation markings on the barrel may be straight or slanted to help reduce parallax errors when reading. The ratchet mechanism can be disabled for variable adjustment control. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. /p>Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Fowler Brand: Fowler

Includes wrench and case Series No. 52-248 offers Fowler standards of fine quality and accuracy. A variety of sizes covers a range of measuring applications. Features Hammertone blue baked enamel finish Microfine graduations on satin chrome finish and carbide tipped measuring faces Ratchet stop thimble for exact and repetitive readings Spindle thread is hardened, ground and lapped Anvil & spindle hardened and precision ground with microlap finish on tips All micrometers meet or exceed U.S. Federal specifications for accuracy Includes standard