Outside Micrometers - Page 47

Manufacturer: Starrett Brand: Starrett Model: 436.1XP-1

The Starrett 436.1 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a tapered frame for measuring narrow slots and tight places. The micrometer’s steel frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001” or 0.0001” depending on the model, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 115-116

The Mitutoyo 115 series spherical face micrometer has a spherical anvil and a flat or spherical spindle face, depending on the model, for measuring the thickness of tubing walls, and a vernier scale in metric units for taking precise outside diameter (OD) measurements. It also has a ratchet-stop mechanism to help provide uniform pressure for precise, repeatable measurement during adjustment. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.01mm with a satin chrome rust- and glare-resistant finish. The spindle and anvil are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-226-801-1

The Fowler 52-226-801-1 digit micrometer has a 0-1" measuring range and a 60-degree pointed anvil/spindle pair for measuring hard-to-reach areas including thread accuracy in screw-cutting operations, small flutes, recesses, grooved trolley wires, and keyways. The digit display has 0.001" graduation intervals and Vernier scale has 0.0001" graduation intervals and an overall accuracy of 0.00016" for precise readings. Microfine graduations on a satin chrome finish provide clear reading. The positive locking nut on the spindle locks measurements in place for accurate readings. A zero adjustment on the sleeve ensures accurate measurements. The conical anvil and spindle have a hardened and precision ground micro-lapped finish with a 0.012" radius curvature at the extremity and a 0.21" length for wear resistance and long life. The spindle thread is hardened, ground, and lapped to provide smooth movement, accuracy, and long life. The ratchet-stop thimble provides an audible sound and stops turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The grey baked-enamel frame provides durability. SpecificationsDisplay type Digit with Vernier scale Anvil/spindle style 60-degree point Measuring range Varies Digit graduation interval 0.001" Vernier graduation interval 0.0001" Accuracy 0.00016" Thimble style Ratchet stop Anvil/spindle radius 0.012" at curvature Anvil/spindle length 0.21"Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior di...

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: 2312-2010

1-2"/ 25-50mm x 0.00005"/0.001mm Electronic, Digital Blade Micrometers, #2312-2010 Range: 25-50mm/1-2" Resolution: 0.001mm.(0.00005") Accuracy: ±0.002mm mm/inch conversion. ABS/INC switchable. Reset/Pre-set. Hold function. Hold function for max. or min. values. Non-rotating spindle. Blade penetration = 0.315" Blade thickness = 0.03" Blade width = 0.256"

Manufacturer: Blue-Point Brand: Blue-Point Digit Outside Micrometer, 0-25 mm, 0.01

Blue-Point Digit Outside Micrometer, 0-25 mm, 0.01 mm increments, Part #MIC1MB

Manufacturer: Fowler Brand: Fowler

Includes case Fowler's Digit-Disc Micrometers feature extra large diameter discs which easily enter hard to reach places such as narrow grooves, slots and recesses. Features Hammertone blue baked enamel finished frame is tapered for hard to get at places. Anvil and spindle are hardened and precision ground with microlap finish on measuring faces. Positive locking nut on the spindle Quick and easy zero adjustment on sleeve Ratchet thimble The disc type anvil and spindle simplifies measuring the thickness of difficult, closely spaced sections, ribs, keys, fins, cutting edges on forming tools, chordal thickness of gear teeth, etc. Meets or exceeds Federal accuracy specs.

Manufacturer: Fowler Brand: Fowler

Features 30 pointed anvil and spindle for measuring small grooves, keyways, small flutes and hard to reach dimensions Protected to IP54 specifications Large LCD Display, 8.5mm Automatic switch off Carbide measuring faces Absolute /25mm include standard

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 103-181

The Mitutoyo 103 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001”, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 111-115

The Mitutoyo 111 series spline micrometer has a small-diameter anvil and spindle for measuring splined shafts, slots, and keyways, and a vernier scale in metric units for taking precise outside diameter (OD) measurements. It also has a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.01mm with a satin chrome rust- and glare-resistant finish. The spindle and anvil are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Fowler Brand: Fowler

Includes wrench and case Series No. 52-248 offers Fowler standards of fine quality and accuracy. A variety of sizes covers a range of measuring applications. Features Hammertone blue baked enamel finish Microfine graduations on satin chrome finish and carbide tipped measuring faces Ratchet stop thimble for exact and repetitive readings Spindle thread is hardened, ground and lapped Anvil & spindle hardened and precision ground with microlap finish on tips All micrometers meet or exceed U.S. Federal specifications for accuracy Includes standard