Outside Micrometers - Page 50

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe chrome-framed outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a convertible friction drive thimble mechanism for uniform or variable pressure during adjustment, and tungsten carbide faces for wear resistance.The micrometer’s frame, thimble, and sleeve have a satin chrome rust- and glare-resistant finish. Frames with a base measurement range greater than or equal to 1” are heat-insulated to help reduce temperature-related expansion or contraction. The vernier scale on the thimble and sleeve is graduated to 0.0001”. Depending on the model, graduation markings on the barrel may be straight or slanted to help reduce parallax errors when reading. The ratchet mechanism can be disabled for variable adjustment control. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. /p>Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: EGEE-1006

Manufacturer: iGaging Brand: iGaging

iGaging Professional Tools, SUPER Precision, IP65 Fluid & dust protection! Crisp, clear, easy-to-read LCD display, accurate to 0.00016''. Hardened and ground spindle with carbide anvil ensure durability and accuracy. Comes in a padded case with adjustment wrench, instructions booklet and extra battery. Features: Traditional Standard Vernier analog scale on stem Digiatl Electronic Display with 2 measuring modes Metric/Standard IP65 Protection for water, Oil and Dust Large LCD Display Absolute & Incremental Modes Automatic Switch Off Accuracy +/- 0.00016" Range 0-1", 1-2", 2-3"/0-25mm, 25-50mm, 50-75mm Resolution 0.00005"/0.001mm Carbide Measuring Surfaces Exceeds USA Federal Accuracy Standards

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Model: 599-3-31

The Brown & Sharpe chrome-framed outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a convertible friction drive thimble mechanism for uniform or variable pressure during adjustment, and tungsten carbide faces for wear resistance.The micrometer’s frame, thimble, and sleeve have a satin chrome rust- and glare-resistant finish. Frames with a base measurement range greater than or equal to 1” are heat-insulated to help reduce temperature-related expansion or contraction. The vernier scale on the thimble and sleeve is graduated to 0.0001”. Depending on the model, graduation markings on the barrel may be straight or slanted to help reduce parallax errors when reading. The ratchet mechanism can be disabled for variable adjustment control. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. /p>Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-401-221-1

The Fowler 52-401 series outside micrometer has a choice of measuring range and flat anvil/spindle pairs with interchangeable anvils to provide a wide measuring range. The Vernier scale has 0.001" microfine graduations on satin chrome finish for easy reading. A 0.00003" flatness, and an accuracy of 0.001" and 0.0004" parallelism on 0 to 1" micrometers provide accurate measurements. Carbide-tipped anvils provide wear resistance and are fitted with an adjusting collar to set the overall dimension. The spindle thread is hardened, ground, and micro-lapped to provide smooth movement, accuracy, and long life. The positive locking lever on the spindle locks measurements in place for accurate readings and the zero adjustment on the sleeve ensures accurate measurements. The ratchet-stop thimble provides an audible sound and stops turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The baked-enamel finish provides durability. Each micrometer includes a set of inter­changeable anvils to adjust accurately the micrometer for the required range, a wrench, and a fitted case. SpecificationsDisplay typeVernierAnvil/spindle styleFlatMeasuring rangeVariesGraduation interval0.001"Accuracy0.001" for 0 to 1" micrometersThimble styleRatchetAnvil/spindle diameter0.256" for 0 to 12" micrometers, 0.295" for 12 to 20" micrometersFlatness0.00003"Parallelism0.0004" on 0 to 1" micrometersMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, ...

Manufacturer: INSIZE Brand: INSIZE Model: 3232-6

Blade micrometer, 5-6", graduation 0001".

Manufacturer: Starrett Brand: Starrett Model: T216XRL-2

The Starrett 216XRL series outside micrometer has a mechanical digit counter for ease of reading to 0.001”, a tapered frame for measuring narrow slots and tight places, and a ratchet-stop mechanism helps provide uniform pressure for precise, repeatable measurements. The micrometer’s steel frame has a black enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.0001” with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Taylor Toolworks Brand: Taylor Toolworks

This is a 0-1 inch / 0-25 mm high precision digital micrometer. Comes with case, directions and extra battery. Features: 1) Metric and SAE measuring modes 2) Large LCD Display 3) Absolute & Incremental Modes 4) Automatic switch off after 5 minutes of non-use 5) Accuracy +/- 0.00016 of an inch 6) Range 0-1 inch / 0-25 mm 7) Precision ground carbide contact surfaces 8) Meet or exceeds Federal Accuracy Standards 9) Resolution 0.00005 inches / 0.001 mm 10) Extra battery included (CR2032)

Manufacturer: HFS Brand: HFS

Micrometer Tolerance Measure Range Accuracy 0-1" .00015"/ .004 mm 1-2" .00015"/ .004 mm 2-3" .00019"/ .005 mm Standard Tolerance Standard Size Tolerance 1" .00008" 2" .00008" Product includes: Fitted case Adjusting wrench 2 Standards (1", 2")

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: S916-C752