Micrometers - Page 52

Manufacturer: INSIZE Brand: INSIZE Model: 7302-SPC2A

Data output cable, for electronic micrometer (except 3108 and 3109).

Manufacturer: L.S. Starrett Brand: Starrett

End Measuring Rod is used for checking and setting micrometers of 2 capacity and larger. Also use on machine tools for comparing gages, checking precision measuring tools, and measuring parallel surfaces. Insulated handles minimize expansion by heat when held in the hand. This listing is for each. Technical Specification Item End Measuring Rod w/Grip Dia. 11mm Range 300mm For Use With 325mm Micrometers, Includes Insulating Rubber Handle

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe TESA interchangeable thread inserts for TESA AC series micrometers are an accessory for use with the Brown & Sharpe TESA Micromaster AC or Isomaster AC micrometer. The V-anvil and conical spindle tip pair have a 60-degree flank angle and are sized in inch units for measuring the pitch diameter of screw threads conforming to the Unified Inch Standard, including UN, UNC, and UNF series. The thread inserts are made of hardened steel for durability.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 103-262

The Mitutoyo 103 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001”, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-250-021-0

The Fowler 52-250 series EZ-Read outside micrometer has a digit display with a 0.0001" resolution, a choice of measuring range, and a disc-style anvil/spindle pair to measure thickness of narrow grooves and difficult or closely spaced areas, such as slots and recesses. Disc micrometers are also used to measure ribs, keys, fins, cutting edges on forming tools, and the chordal thickness of gear teeth. The digit display has a 0.0001" resolution and an accuracy of 0.0002" for precise readings and accurate measurements. The anvil/spindle shafts have a 0.256" diameter, and hardened, ground, and micro-lapped measuring faces provide wear resistance. The discs have a 0.788" diameter, 0.315" center-hole diameter, 0.035" edge thickness, a 0.130" total depth, and 0.00004" flatness. The hardened, ground, and lapped spindle thread provides smooth movement, accuracy, and long life. The locking lever on the spindle locks measurements in place for accurate readings. A friction thimble applies constant force for repeatability between users. Friction-style thimbles are suitable for one-handed operation and stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The micrometer includes a wrench and a fitted case. SpecificationsDisplay type Digit Anvil/spindle style Disc Measuring range Varies Graduation interval 0.0001" Accuracy 0.0002" on 1" and 2" micrometers Thimble style Friction Disc diameter 0.788" Disc center hole diameter 0.315" Disc edge thickness 0.035" Total disc depth 0.130" Anvil/spindle diameter 0.256" Flatness 0.00004"Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micromete...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 103-179

The Mitutoyo 103 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001”, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 101-114

The Mitutoyo 101 series outside micrometer has a tapered frame for measuring narrow slots and tight spaces, a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer’s frame, thimble and sleeve have a satin chrome rust- and glare-resistant finish. The vernier scale on the thimble and sleeve is graduated to 0.0001”. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The unit comes with a fitted plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 153-204

The Mitutoyo 153 series micrometer head has a vernier scale in metric units for taking precise measurements and a non-rotating spindle that helps prevent wear and deformation on the workpiece. It is available with a plain stem for mounting in a fixture with a split-body clamp or setscrew, or a clamp-nut stem for quick mounting. The vernier scale is graduated to 0.01mm or 0.001mm depending on the model, and has a satin chrome rust- and glare-resistant finish. The flat measuring face is carbide-tipped for wear resistance and is lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Starrett Brand: Starrett Model: T444.1XRL-3

T444.1XRL-3 Outside Micrometer .0001" Grad, 0-3" Range, Ratchet Stop, Lock Nut, Carbide Faces. The Starrett T444 Series have heat-insulators on the frame to help reduce temperature-related expansion or contraction. The Vernier scale on the thimble and sleeve is graduated to 0.001", with a satin chrome rust and glare-resistant finish on the thimble. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement.

Manufacturer: Starrett Brand: Starrett Model: 261L

This tool is useful in gaging jobs where scratches on the work surface cannot be tolerated or where there is risk of distortion when spindle meets work as in measuring soft or elastic materials. With speeder and lock nut.