Micrometers - Page 54

Manufacturer: Flexbar Brand: Flexbar

Electronic Point Micrometer. Quality Electronic Digital Readout Micrometer Provides Error-Free Readings To .00005"/.001mm Features: Large LCD display, High contrast. Resolution: .00005"/.001mm. Friction stop and locking Lever. Accuracy: .00015". Carbide Tips on Anvil and spindle. Zero-Set key allows comparative Measurements. Anvil Diameter: .256". RS-232 SPC Output. Function Key. Heat insulated frame cover Uses 1 SR44 Battery. Available in Ranges up to 2"/50mm. for Measurement of small Grooves, keyways & other Hard to reach Measurements. 30 Degree Points. Points are Carbide Tipped. Resolution: .00005"/.001mm. includes fitted Case. Model No. 15756, 0-1" (0-25mm) Electronic Point Micrometer

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 293-832

The Mitutoyo 293-832 Digimatic MDC-MX digital micrometer is for taking outside diameter measurements. The micrometer has a measurement range of 0 to 1.0" (0 to 25.4mm), resolution of 0.00005" (0.001mm), and an accuracy of + or - 0.0001" (0.002mm). The LCD screen displays in inches and metric units. This micrometer has a friction thimble to help provide uniform pressure for precise, repeatable measurements. The measuring faces are flat and are carbide-tipped for durability. This unit turns off after 20 minutes of idle time and can be turned on by twisting the spindle for convenience.Additional functions offered by this micrometer include zero setting and alarms for low voltage and counting value composition errors. The measuring force is 5 to 10 Newtons (N). It has a battery life of approximately 1.2 years of normal use. This unit comes with a SR-44 battery and fitted, plastic case.SpecificationsDisplay typeLCD displays in both inches and metric unitsAnvil/spindle styleFlat, carbide tippedRange0 to 1.0" (0 to 25.4mm)Resolution0.00005" (0.001mm)Accuracy+ or - 0.0001" (0.002mm)Measuring force5 to 10NThimble styleFriction thimbleData outputNoDimensions143.2mm length and 25mm throat depthWeight275gPower sourceSR-44 batteryMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1...

Manufacturer: Starrett Brand: Starrett Model: V436.1MXRL-50

The Starrett 436.1 series outside micrometer has a vernier scale in metric units for taking precise outside diameter (OD) measurements, a tapered frame for measuring narrow slots and tight places, and a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements. The micrometer’s steel frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.01mm or 0.001mm depending on the model, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Fowler Brand: Fowler

Package Includes: Fowler Electronic Micrometer Carrying Case Appropriate setting ring Features Measuring jaws and faces fully hardened and microlapped for accuracy Water Resistant to IP54 specifications. True inch/metric conversion. Friction thimble Large easy-to-read LCD display Direct RS232 output Resolution: .00005 /.001mm Accuracy: 0.00020 /.005

Manufacturer: ASIMETO Brand: ASIMETO Model: 242-12-1

Interchangeable Rod Type, 2" ~ 12" Rod Type Inside Micrometer Set, ASIMETO

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 141-101

The Mitutoyo 141 series vernier inside micrometer includes a set of interchangeable rods for a diversified range of measurement, and has a vernier scale in metric units for making precise measurements. The micrometer and rods have a satin chrome rust- and glare-resistant finish. The measuring faces are hardened steel for durability. The vernier scale is graduated to 0.01mm. A locking clamp helps hold measurements in place. The micrometer and accessories come with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Fowler Brand: Fowler

Package Includes: Fowler Electronic Micrometer Carrying Case Appropriate setting ring Features Measuring jaws and faces fully hardened and microlapped for accuracy Water Resistant to IP54 specifications. True inch/metric conversion. Friction thimble Large easy-to-read LCD display Direct RS232 output Resolution: .00005 /.001mm Accuracy: 0.00024 /.006mm

Manufacturer: Starrett Brand: Starrett Model: 226RL-3

The Starrett 226 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a knurled friction thimble that helps provide quick adjustment capability. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001”, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 368-162

The Mitutoyo 368 series Holtest vernier inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a vernier scale in metric units for taking precise ID measurements. It also has a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements.The micrometer is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.001mm or 0.005mm depending on the model. The measuring faces are carbide-tipped or TiN-coated for wear resistance depending on the model. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 112-153

The Mitutoyo 112 series point micrometer has a pointed spindle and blade anvil for measuring grooves and keyways, a vernier scale in metric units graduated to 0.01mm for taking precise outside diameter (OD) measurements and a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer’s frame has a baked enamel finish for protection and durability. The spindle and anvil are made of hardened steel for durability. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.