Micrometers - Page 58

Manufacturer: Starrett Brand: Starrett Model: 128CZ

The set consists of a satin-chrome micrometer head which can be used in combination with any one or more of a series of rigid, tubular steel measuring rods to obtain the required length. The micrometer head is a modification of our No. 63, which has a 2" range. The head has a basic length of 4" which can be lengthened to 6" by means of its measuring range. Interchangeable tubular steel measuring rods and extension rods are lightweight with extreme rigidity, rods screw into each other and seat against hardened ground and lapped surfaces necessary for high accuracy, rod diameter 5/8". Movement of screw: 2", Range with Combination Head: 11-299". Set includes (1) 4-6" Head, (1) each 2", 4", 6", 8", 10", 12" Rods, (1) 12" extension rod, (2) 24" extension rod.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe TESA measuring head for inside micrometers is an accessory for use with the Brown & Sharpe TESA Alesometer LCD capa micrometer. It has three-point contacts for self-centering measurement of the inside dimension (ID) of bores. The measuring head is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The measuring faces are made of hardened steel and may be uncoated or tungsten carbide-tipped for wear resistance, depending on the model.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 339-102

The Mitutoyo Digimatic tubular LCD inside micrometer includes a set of hollow, tubular extension pipes to help provide light weight with rigidity and balance shoulderswhen measuring inside dimensions of cylinders, rings, and parallel surfaces. It has a single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm), and Statistical Process Control (SPC) data output to transmit results to a computer or external device. The output jack transmits SPC results to a computer through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. The electronics housing has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The measuring faces are carbide-tipped for wear resistance. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a wooden case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America C...

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Model: 599-290-35-1

The Brown & Sharpe Micromaster Intrimik Capa LCD inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm). An electrostatic capacitance linear encoder helps ensure repeatable, precise measurement, and Statistical Process Control (SPC) data output to transmit results to a computer or external device through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. An automatic off function helps preserve battery life when the unit is not in use. The electronics housing has an Ingress Protection 54 (IP54) rating, which means that components are resistant to debris and to splashing water from any direction up to a volume of 10 liters per minute. The measuring faces are made of hardened steel and may be uncoated, TiN-coated, or tungsten carbide-tipped for wear resistance, depending on the model. The micrometer includes, and is powered by, a single CR2032 lithium cell battery, and comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The co...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 140-158

The Mitutoyo 140 series tubular vernier inside micrometer includes a set of large-diameter extension pipes with anvils for a diversified range of measurement when measuring large inside dimensions (ID) of cylinders, rings, and parallel surfaces. It has a vernier scale in metric units for taking precise ID measurements to 0.01mm, and a satin chrome rust- and glare-resistant finish. The micrometer head has a travel of 50mm per revolution that helps provide quick positioning. The hollow, tubular extension pipes help provide light weight with rigidity. The micrometer and accessories come with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Li Dong Brand: Leetun

Condition: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging , such as an unprinted box or plastic bag.

Manufacturer: Starrett Brand: Starrett Model: 942

942 1" Case

Manufacturer: uxcell Brand: uxcell Model: a15091100ux0646

The Micrometer Head replace old one, micrometer Caliper measures the outside thickness or the diameter of small parts, great for machinists and jewelers for making precise measurements.Can also to as a teaching aid tool in engineering and technical schools.

Manufacturer: Starrett Brand: Starrett Model: 247MD

Starrett outside micrometers and micrometer heads having spindle can be instantly converted for measuring wall thickness of tubing, split and full bearings, sleeves and other parts with rounded surfaces of the ball attachment.

Manufacturer: Sparex Brand: Sparex

51mm 2" Internal Circlip - 5 Pack. Manufactured from Carbon Spring Steel. DIN 472. Please note: The size shown refers to the the measurement of the circlip from the outside of the widest left edge to inside right edge.