Depth Gauges - Page 5

Manufacturer: Starrett Brand: Starrett Model: 644JZ

The Starrett 644 Series Dial Depth Gauges, Indicator Type, Inch, have a measurement range of 0 to 3", a resolution (or smallest graduation interval) of 0.001", with + or - 1 graduation (0.001") for the first 2.5 revolutions of accuracy. The dial face has distinct, easy to read figures. The gauges in this series are intended for longer distances and include three round-end contact points to cover the range. The base of these gauges is 2.5" long, and is hardened and ground for durability and accuracy. Model 644JZ includes a fitted case; model 644J is not sold with a case. Electronic indicators and flat-end contact points are sold separately. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.

Manufacturer: Starrett Brand: Starrett Model: 643J

The Starrett 643 Series Dial Depth Gauges, Indicator Type, Inch, have a measurement range of 0 to 0.125", a resolution (or smallest graduation interval) of 0.0005", with + or - 1 graduation (0.0005") for the first 2.5 revolutions of accuracy. The dial face has distinct, easy to read figures. The gauges in this series have a knife-edge base of 2.5" long, and needle point contact that are both hardened and ground for durability and accuracy. The base of these units has a cutout so that the user can see the point to accurately position it for close measurements. Model 643JZ includes a fitted case; model 643J is not sold with a case. Electronic indicators are sold separately. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 570-312

The Mitutoyo 570-312 LCD Absolute Digimatic height gauge displays a measurement range of 0” - 12"/0 - 300 mm, an LCD digital readout precise to 0.0005”/0.01 mm, with + or – 0.0015”/0.03 mm of accuracy, and data output to transmit results to a Mitutoyo miniprocessor or computer for statistical process control (SPC). This height gauge has an electronic microprocessor providing the ability to preset a reference height at any position, as well as to set a temporary zero position and return to a true zero reading. The output port transmits results to a Mitutoyo miniprocessor or computer through an interface cable (not included) for SPC. The gauge has a plug to receive input from an electronic touch probe (not included) for efficient digital measurement. An electrostatic capacitance linear encoder helps prevent overspeed errors to help ensure repeatable, precise measurement. A hand-operated feed wheel raises and lowers the gauge on the beam for measurement ease, and a clamp lever allows the user to hold measurement position. The scriber, used to mark a position on a workpiece, is 30 mm x 60 mm (H x W), carbide-tipped to help prolong life, and is held to the gauge by a screw clamp for fastening ease. The grip-base helps hold the unit in position by hand. The height gauge weighs 10.14 lbs/4.6 kg. The unit comes with an SR44 battery. Height gauges, also called gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electr...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 571-262-10

The Mitutoyo Series 571 ABSOLUTE Digimatic LCD Depth Gauge, Caliper Type, Inch/Metric, depending on the model, have a measurement range of 0 up to 8" (0 to 1000mm), and a resolution (or smallest graduation interval) of 0.0005" (0.01mm), with up to + or - 0.001" of accuracy. The LCD screen displays in both inches and metric, and can keep track of the origin point for the life of the battery (about 3 years under normal use). The bases are either 100mm or 250mm long, and the measuring faces of the units are hardened, ground, and lapped for durability and accuracy. The gauge conforms to European Conformity (CE) marking and certain models in this series conform to the Ingress Protection 67 (IP67) standard. The display has origin-set, zero, and data output functions for convenience. The units support SPC output. The gauges in this series include an SR44 battery. Optional SPC cables, wider bases (for up to 450mm range models), and an LCD with data hold are sold separately. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: Starrett Brand: Starrett Model: S668CZ

The Starrett S668CZ shaft alignment clamp set includes two chain clamps, two 196B5 back-plunger dial indicator gauges, two PT18724 snugs, two extension plates, and various posts to perform radial and angular alignment of motors, pumps, and compressors. The set comes in a fitted case for organization and protection. The clamp set provides a pair of indicator gauges to measure alignment distortion, with a configurable armature to secure the gauges in position on two axes. The two chain clamps consist of a black anodized aluminum frame with a roller chain that can secure the clamp around a shaft up to 7.5 inches in diameter. The three pairs of 3/8-inch diameter posts measure to 5”, 7-7/16”, and 9” in length, and are made of stainless steel for rigidity. Two extension plates provide additional radial clearance when needed. Two stainless steel snugs secure one post to another, to hold the gauges in measuring position. The two 196B5 back-plunger dial indicator gauges have three contact points and are graduated to 0.001”, with a travel range to 0.2” The gauges have a 0.25” shank, a white dial face with numbers ascending from 0 to 50 and descending back to 0, and a rotating knurled bezel to set the dial pointer to the zero position. Clamps are fastening tools that use pressure to secure workpieces to each other or to a workspace, and prevent movement. Clamp style varies widely, depending on general and specialized applications. Many clamps are for temporary use during construction, repair, or alignment of a workpiece, while others may be used to secure a component in its final installation or assembly. The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA. What’s in the Box? Two chain clamps Two 1965B back-plunger dial indicator gauges Two PT18724 snugs Two extension plates Two 5” posts Two 7-7/16” posts Two 9” posts Fitted...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 329-351-10

The Mitutoyo 329-351-10 LCD Depth Micrometer, Interchangeable Rod Type, has a range of 0 to 12" (0 to 304.8mm), and a resolution (or smallest graduation interval) of 0.00005" (0.001mm). (See the product catalog for information on accuracy.) The LCD interface displays in both inches and metric. The gauge includes six measuring rods that can be adjusted in 1" (25mm) increments. The display has origin-set, preset, zero, data hold, and data output functions for the users' convenience. It has a satin chrome finish on the body for readability. The base is 4" (101.6mm) long and is made of hardened steel for durability and accuracy. This gauge has a ratchet stop and measuring rod clamp for precise measurements. The gauge conforms to European Conformity (CE) marking. The unit includes an SR44 battery and a protective plastic case, and the shipping weight is 3.61 lb. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.What's in the Box?Mitutoyo 329-351-10 depth micrometer(12) Measuring rodsSR44 batterySpannerPlastic caseInstructions

Manufacturer: ezMachineTools Brand: ezMachineTools

This 6" digital depth gage is made out of stainless steel body has the accuracy of 0.001"/0.02mm and resolution of 0.0005"/0.01mm. This has large LCD display and in Metric and SAE with on/off and auto off switch. It comes with 1 free extra battery and a case.

Manufacturer: ACCURATE ACCESSORIES Brand: ACCURATE ACCESSORIES

Suitable For Caliper Gauge of Capacity 4", 6", 8" Base Length_Inch 4"

Manufacturer: MEDA - SUPERIOR IMPORT Brand: Meda - Superior Import

4 PIECES - INCH 4 to 84 Screw Pitch Gage, 1/32" to ¼" Radius Gage, 60° Center Gage & .0015 to .25" Feeler Gage

Manufacturer: MEDA - SUPERIOR IMPORT Brand: Meda - Superior Import

4 PIECES - METRIC 0.4 to 6 Screw Pitch Gage, 1 - 7mm Radius Gage, 55° Center Gage & .05 to 1.0mm Feeler Gage