Calipers - Page 104

Manufacturer: Sunex International Brand: Sunex Model: 6010

Sunex's disc brake micrometer's deep throat design is perfect for today's larger sized rotors. Features a 1-inch standard to ensure long-time accuracy and a convenient blow-molded heavy-duty case for easy storage. Its measuring surfaces are precision-ground and lapped for maximum accuracy.

Manufacturer: Fred V Fowler Brand: Fred V Fowler

Supersedes part number 74-100-330Range: 6" / 150 mmAccuracy: .001" / .02mmReads in inch, metric & fractionsDirect inch/metric/fraction conversionAbsolute/Incremental measurementWater resistant to IP54 standardsResolution: .0005" / .01mm (Fractions in 1/64th increments)Stainless steel frame4-way measuringIncludes molded plastic case.Fred V Fowler 74-100-330-1 EURO-CAL IV Electronic Caliper Inch Metric Fraction

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-563-677-0 Color: White

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Qualtech Brand: Qualtech

DEWDIGITAL Size: 6" Features: -Digital capiler.-Round shape. Dimensions: -Product weight: 1.5 lbs.

Manufacturer: iGaging Brand: iGaging

Professional Grade Tools, SUPER Precision, IP54 Fluid Resistant! 0-1" (0-25mm) Micrometer: Crisp, clear, easy-to-read LCD display, accurate to 0.00016''. Hardened and ground spindle with carbide anvil ensure durability and accuracy. Comes in a padded case with adjustment wrench, instructions booklet and extra battery. Features: 2 measuring modes Metric/Standard IP54 Splash Water, Oil and Dust Resistant Large LCD Display Absolute & Incremental Modes Automatic Switch Off Accuracy +/- 0.00016" Range 0-1"/0-25mm Resolution 0.00005"/0.001mm Carbide Measuring Surfaces Direct RS232 SPS Output Meet or Exceeds Federal Accuracy Standards 0-6" (0-150mm) Caliper: Super high quality measuring device. Easy read with the largest LCD display available. No other caliper offer you 4 digits decimal in SAE mode or 1/128" fractional display. This caliper offers IP54 resistance protection against dust splash water and oil. Features: Easy read SUPER LARGE display (2-3/8"x7/8") IP54 - Splash water, oil and dust resistant Hardened stainless steel Precision lapping finish Range: 0-6" Accuracy: 0.001" Repeatability: 0.0005" Resolution: 0.0005"/0.01mm/1/128"

Manufacturer: Fowler Brand: Fowler Model: 54-100-004-2

Patented ceramic capacitive sensor. Stainless steel frame. Direct Inch/Metric conversion. Absolute/Incremental Measurement. Large easy-to-read LCD display. Absolute referencing. Includes molded case.

Manufacturer: BRC Creative Corp. Brand: Boruo Color: Silver Set of 3

When you require exact measuring, you reach for a caliper. But an accurate measurement is meaningless if you can't read it accurately. This caliper takes an essential tool into the 21st century with an extra-large LCD digital readout for exact internal and outside measurements accurate to .001-Inch. Instantly converts from SAE or Metric, the display can be zeroed at any point on the slide. Machine-grooved thumb-roll mechanism and position lock for sure adjustment. Hardened stainless steel shaft with depth-measurement probe, precision ground jaws. On-off switch with auto-off, two long-life batteries included (one spare)

Manufacturer: Marathon Brand: Marathon Model: CO030150L

A caliper ( British spelling also calliper) is a device used to measure the distance between two symmetrically opposing sides. A caliper can be as simple as a compass with inward or outward-facing points. The tips of the caliper are adjusted to fit across the points to be measured, the caliper is then removed and the distance read by measuring between the tips with a measuring tool, such as a ruler A refinement now popular is the replacement of the analog dial with an electronic digital display. This version of the caliper allows reading the value directly from a single display. Many digital calipers can be switched between metric and imperial units. All provide for zeroing the display at any point along the slide, allowing the same sort of differential measurements as with the dial caliper but without the need to read numbers that may be upside down. Digital calipers may contain some sort of "reading hold" feature, allowing the reading of dimensions even in awkward locations where the display cannot be seen.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-008-004-0 Color: Black

The Fowler One-Rev stainless steel dial caliper has dial graduations of 0.001" with 0.001" accuracy, a sliding jaw with a lock, and a covered rack. The knurled lock screw holds the sliding jaw in position and helps ensure a consistent measurement. A covered rack prevents dirt and debris from clogging the gear, and helps prevent measurement errors. A thumb-operated fine adjustment roller allows for one-handed use. This caliper is used for measuring inside dimensions (ID), outside dimensions (OD), depth, and step.The caliper measures 0.10" per revolution of the dial. The dial has 0.001" graduations, and the beam has engraved 0.10" graduations. The hardened stainless steel components, including the bar, measuring surfaces, rack, gears, and depth rod, offer corrosion resistance, increased accuracy, and long life. Self-contained movement eliminates gear misalignment, while the dual pinion drive mechanism reduces wear on the rack and pinion. An adjustable dial enables setting zero. Spring anti-backlash control offers increased accuracy over standard gear configurations. Backlash is the amount of clearance between mated gear teeth in the caliper controls that prevents the gear teeth from jamming. It is undesirable to have much backlash due to the lack of precision offered by the increased amount of play between gears. Certain gear designs can minimize or eliminate backlash; spring anti-backlash systems use a spring to add a compressive force, thereby minimizing backlash. The hardened stainless steel is polished to a satin chrome finish, to help prevent glare. This caliper comes with a fitted case.Dial calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to measure inside, outside, and step measurements in standard or metric units. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides alon...

Manufacturer: iGaging Brand: iGaging

This Digital Readout Kit can be adapted to a number of woodworking machines, including router lifts, router tables, planers and shapers. It has a remote display connected with a 50 Inch cord that can be disconnected for easy installation and access. The large, easy to read display reads in inches with fractions (1.64 Inch) or millimeters. Decimal inches are displayed in .001 increments and millimeters in .05mm increments. Fits router lifts made by Jessem, Jointech and others. The readout can be easily installed using magnets, double face tape, or screws. Vertical and horizontal slider mounting hardware is included. Packaged in a protective case with 3V CR2032 battery.