Calipers - Page 106

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-010-025-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: TTC Brand: TTC

FeaturesResolution: .0005"Inch/metric conversion.Remembers origin in the off position.SPC output.With depth gage.Battery included.Includes(1) 0~6" Electronic digital caliper.(1) 0~12" Electronic digital caliper.

Manufacturer: Hexagon Metrology Brand: Standard Gage Model: 00524102

The Standard Gage 00524102 micrometer and caliper set includes a 0 to 1" outside micrometer, 0 to 6" dial calipers, and a depth measuring base for making precision measurements. The micrometer has 0.0001" graduations and precision of 0.00016" and its chrome steel frame has engraved black-colored decimal equivalents. It has carbide-tipped measuring faces, a ratcheting friction thimble, and a nut for locking the spindle in place. The dial calipers have a white-face dial with 0.100" travel per revolution. The calipers are made of stainless steel and have a nut for locking the jaws in place. The depth measuring base is a T-bar style base that attaches to the dial calipers' ruled blade to aid depth measurement and is 76.2mm long to span holes and recesses for stable measurements. The micrometer and caliper set comes with a storage case and is typically used in manufacturing, machining, and mechanical engineering.Dial calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to measure inside, outside, and step measurements in standard or metric units. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it to take measurements. A circular dial indicator is fixed to the movable jaw on a toothed gear rack that transfers movement of the jaws to the dial needle. The base measurement is taken from the long beam, which provides the initial whole measurement in inches or centimeters, and added to the dial reading, which provides fractional measurements in inches or millimeters. A locking mechanism provides the ability to take differential measurements for determining the difference in measurements between two objects. Compared to digital calipers, dial calipers are more durable, but are more susceptible to shock damage and prone to getting dirt in the gears, which can cause accuracy problems...

Manufacturer: GAGE GLASS Brand: GageGlass

5/8X48 PLASTIC GAGE GLASS Outside Diam: 5/8 inLength: 48 inMaterial: PlasticWt.: 0.41 lb

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-485-030-0

The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-229-770-0

The Fowler 52-229-770 caliper and micrometer set includes a Vernier-scale outside micrometer with a 0 to 1" measuring range, a black-face dial caliper with a 0 to 6" measuring range, and a fitted case. The Vernier-scale outside micrometer has a 0 to 1" measuring range and a flat anvil/spindle pair for general purpose measuring. The Vernier scale has 0.0001" microfine graduation intervals on a satin chrome finish for precise readings. The positive locking nut on the spindle locks measurements in place for accurate readings and the zero adjustment on the sleeve ensures accurate measurements. The anvil/spindle pair has a 0.256" diameter hardened, precision-ground, and micro-lapped carbide measuring faces with 0.00003" flatness and 0.0005" parallelism to provide accurate measurements. Friction thimble applies constant force for repeatability between users. Friction-style thimbles are suitable for one-handed operation and stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The heat-insulated frame helps reduce temperature-related expansion or contraction, providing accurate measurements, and protects the operator's hands from heat.The shockproof stainless steel dial caliper has a black face and dial graduations of 0.001" with 0.001" accuracy, and beam-engraved 0.1" graduations, and is used for measuring inside dimensions (ID), outside dimensions (OD), depth, and step. The caliper measures 0.10" per revolution of the dial. The caliper has shockproof anti-backlash control, a sliding jaw with a lock, and a covered rack. Shockproof anti-backlash control with a heavy-duty spring provides increased accuracy over standard gear configurations. Backlash is the amount of clearance between mated gear teeth in the caliper controls that prevents the gear teeth from jamming. A knurled lock screw holds the sliding jaw in position to help ensure a consistent measurement. A covered rack prevents dirt and debris from clogging the gear, and helps pr...

Manufacturer: Central Tools Brand: Central Tools

CE6407 Features: -Magnetic base. -Twelve sets plus five magnetic bases may be purchased separately. -Conform to most any irregular surface allowing placement almost anywhere. -Range: 5mm. Product Type: -Stud Finders. Dimensions: Overall Product Weight: -1.57 Pounds.

Manufacturer: Newtry Brand: Newtry®

Usually the product should take about 6--13 business days to arrive your hand after your payment is confirmed Major performances Type C: applicable to the hardness test of rubber microporous material. Type C applies to the testing of microporous material which is used to make shoes, with compression rate 50 percent, stress 0.049 MPa or above, and this kind of material is made of rubber plastic and has blister in plastic. This hardness gauge conforms to the regulations of GB/T531-99, GB2411-80, hg/t2489-93, JJG304-2003 Technical Parameter Types:Type C Calibration Value:0-100 HC Resolution:1 HC Pressure Head Size:SR2.5 mm End pressure of Pressure Head:0.55 N-8.06 N Pressure Needle Range:0-2.5 mm Apparatus Weight:0.3 Kg Attention:  we will send the product to you as soon as possible  If you have any questions , please feel free to contact us 

Manufacturer: Linsen Tool Co.,LTD Brand: Linsen

Each set of Metric thread ring gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO.We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for reference.

Manufacturer: MTI CORPORATION Brand: MTI

Includes: Digimatic micrometer (friction thimble type), Range: 0-1, LCD resolution: .00005"; Digimatic caliper, Range: 0-6", LCD resolution; .0005"; and a mahogany case. (646PKA077)