Calipers - Page 16

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-603-303-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 530-101

The Mitutoyo 530 series vernier caliper has two sets of jaws for measurement in metric units of outside dimension (OD), inside dimension (ID), step, and depth (when depth bar is included), for applications where the highest accuracy is required, especially in scientific research and in industries where parts must fit exactly. The caliper has a dual vernier scale, with both the upper and lower scales measuring in metric units. A 14-degree vernier face angle improves visibility and helps prevent parallax error in measurement reading. The caliper’s two sets of jaws provide the capability to make OD and ID measurements, as well as step measurements, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer steps are measured. When included, a depth measuring blade with rounded edges provides the ability to make depth measurements. The scales are raised to slide easily and protect the graduation markings. A thumbwheel permits fast and easy measuring. A clamping screw on the upper scale rotates to control scale movement and locks to hold the sliding jaw’s position. The caliper is made of hardened, corrosion-resistant stainless steel with a satin chrome finish that helps reduce glare. The caliper meets Federal Accuracy Specifications GGG-C-111B. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the mai...

Manufacturer: Clockwise Tools Inc. Brand: Clockwise Tools Model: DCLR-0605 Color: White, Grey, Purple

Clockwise Tools DCLR-0605 Digital Caliper is a higher quality and lower price digital caliper. It is highly recomended for home DIY using as well as professional using. The measuring Range is 0-6 inch/150mm. Its accuracy is ±0.001"/0.02mm and Repeatability is 0.0005"/0.01mm. The resolution is 0.0005"/0.01mm, 1/128". The max Measuring Speed that allowed is 120" per second. It has a super large LCD screen (20mm x 50mm) in Inch/Metric/Fractions conversion. It also has a RS232 Data Output. Using connection cable (not included) allows data transfer between digital caliper and PC. Clockwise Tools DCLR-0605 comes with two 3V, CR2032 Lithium batteries. Please NOTE that IN ORDER TO OBTAIN A MORE ACCURATE MEASURING RESULT, PLEASE USE A SMALL PIECE OF PAPER OR PAPER CARD TO CLEAN THE EXTERNAL JAWS EVERYTIME BEFORE USING! Clockwise Tools DCLR-0605 DIGITAL CALIPER HAS AUTO-OFF FUNCTION AND IT TAKES 5-7 MINS TO SHUT OFF. Clockwise Tools DCLR-0605 HAS 1 YEAR WARRANTY. For more information please follow us on Instagram @officialclockwisetoolsinc.

Manufacturer: Wotefusi Brand: Wotefusi

Description: 6" 150mm Electronic Digital Vernier Caliper Specifications Range: 0mm to 150mm/ 0inch to 6inch Resolution: 0.02mm Package Including: 1x Digital Caliper(no battery)

Manufacturer: POR 15 Brand: Por 15 Color: Blue

Dont ruin the look of your new wheels with dirty rusty brake calipers. These POR-15 brake caliper painting kits contain everything you need to paint those factory brake calipers with a super-tough durable finish that will make your ride look terrific. The caliper paint looks great and is strong enough to withstand the punishment of road debris and temperature extremesPOR-15 brake caliper painting kits include. 1 qt. brake caliper cleaner. 8 oz. brake caliper prep. 4 oz. POR-15 rust preventive paint. 8 oz. brake caliper paint. 1 roll of masking tape. 2 pairs of gloves. 2 foam brushes. Dimension 12.5 x 4 x 9 in.

Manufacturer: Carrera Precision Brand: Carrera Precision Model: CP5912

Features »Extra Large easy to read digital LCD screen.. »Accurate to 1/1000th of an inch. »Four methods of measurement: Inside, outside, depth and step from 0'' to 12''. »Metric conversion & zero buttons. »Standard Strong stainless steel frame. »Stepped end depth rod for measuring small holes up to 12'' deep. »Thumb wheel allows for easy, one-handed adjustment. »Screw lock can lock the caliper at a set dimension for multiple measurements. »Zero button lets you zero the measurement at any position. Great for measuring tolerances in the positive and negative.Specifications »Resolution 1/64" - 0.0005"/ 0.01mm.. »LCD Display. »Max Measuring Speed: 1.5 m/sec., 60 in/sec. »Measuring System: Linear Capacitive Measuring System. »Measuring Range: 0-304 mm/0-12 in. »Resolution: 0.01mm/0.0005in.What's In The Box? »Carrera Precision Standard 12-Inch Digital Caliper»Extra Battery»Custom Fitted Storage CaseWarranty »30 Day Satisfaction Guarantee.

Manufacturer: Clockwise Tools Inc. Brand: Clockwise Tools Model: DCLR-0605 Color: White, Grey, Purple

Clockwise Tools DCLR-0605 Digital Caliper is a higher quality and lower price digital caliper. It is highly recomended for home DIY using as well as professional using. The measuring Range is 0-6 inch/150mm. Its accuracy is ±0.001"/0.02mm and Repeatability is 0.0005"/0.01mm. The resolution is 0.0005"/0.01mm, 1/128". The max Measuring Speed that allowed is 120" per second. It has a super large LCD screen (20mm x 50mm) in Inch/Metric/Fractions conversion. It also has a RS232 Data Output. Using connection cable (not included) allows data transfer between digital caliper and PC. Clockwise Tools DCLR-0605 comes with two 3V, CR2032 Lithium batteries. Please NOTE that IN ORDER TO OBTAIN A MORE ACCURATE MEASURING RESULT, PLEASE USE A SMALL PIECE OF PAPER OR PAPER CARD TO CLEAN THE EXTERNAL JAWS EVERYTIME BEFORE USING! Clockwise Tools DCLR-0605 DIGITAL CALIPER HAS AUTO-OFF FUNCTION AND IT TAKES 5-7 MINS TO SHUT OFF. Clockwise Tools DCLR-0605 HAS 1 YEAR WARRANTY. For more information please follow us on Instagram @officialclockwisetoolsinc.

Manufacturer: OSBEL Brand: OSBEL Model: YB-200-2

When you require exact measuring, you reach for a caliper. But an accurate measurement is meaningless if you can't read it accurately. This caliper takes an essential tool into the 21st century with an extra-large LCD digital readout for exact internal and outside measurements accurate to .001- Inch Thechnical Specifications: Resolution: 0.01mmm Power: One 3.0v AG13 battery Measuring Speed: 3m/s Working temperature: 0- +104℉ Relative humidity: < 80% Storage temperature: 14℉ - +140℉ What in the package: 1x Digital Caliper 1x Tiny screwdriver 2x battery (one in the digital caliper,one in package)

Manufacturer: Precision Brand: Precision Brand Model: ETG

This is a brand-new in-the box pocket size Electronic Digital Thickness Gage. Switch from metric to inch measurement on the fly, at the push of a button. Ideal for reading the thickness of anything solid, such as paper, metal, wood and plastic. When the gage is powered on, all you do is close the plunger and push the "ZERO" button to calibrate it. You can set to zero at any position of the anvil. This is a rugged instrument, not a cheap toy. It is powered by a single 457 (SR44) watch battery, which shuts off automatically and comes in a hard-shell plastic case for complete protection.

Manufacturer: SRA Measurement Brand: Machine DRO Model: ME-HZ300

The slotted mounting brackets that clamp to each end of the scale can easily be removed allowing the scale to be cut to any length. Also supplied is a bracket for the rear of the reading head, attached by two M3 screws which are supplied. Using the inch/mm button on the reading head also included is a zero button and on/off button. Included With The Scale - Mounting brackets for the scale beam, Reading Head mounting bracket, Manual, Battery.