Calipers - Page 182

Manufacturer: Generic Brand: Generic Model: QY-US4-DEC22-98

!!!!!----NOTE----!!!!! And if any questions, please contact us first before using A---/to--/-Z or neg-a-t-iv-efee-db-a-c-k or char-g-e-ba-ck or other Ama-zo-n Procedure which will give us lots of troubles Instant, accurate inside & outside measurements in SAE/standard or Metric increments Powered for months by LR44 button battery (incl); just move head for auto-on, turns off automatically Easy-read LCD screen reduces errors; lightweight & strong carbon fiber can't rust, non-magnetic Handy 4-in. size, range 4.25 in./110mm, resolution 0.01"/0.1mm, accuracy +/- 0.01"/0.2mm Converts SAE/Metric & vice-versa, zero-scale function, inside/outside jaws 1.25/.50 in. Weight 2 oz

Manufacturer: Branded Brand: Unknown Color: Multi

Wixey WR100 Stainless Steel 6 Digital Calipers With FractionsWixey Digital Calipers With Fractions Are Precision Stainless Steel Calipers That Display Measurements In Inches With Fractions Or Millimeters.They Are Constructed of High Quality Hardened And Ground Stainless Steel Components And Included The Same Advanced Wixey Technology Features Found In All Our Other Digital Readout Products.The Large Easy To Read Display Reads In Inches With Fractions Or Millimeters. The Fractions Are Displayed Using "Precise Fraction Technology" Which Gives You 4 Times The Accuracy of Other Fraction Readouts. The Decimal Inches Are Displayed In .001" Increments And The Millimeters In .05 Mm Increments.Specifications:Measuring Length: 6 In. (155 Mm)Resolution:Decimal = +/- .001 In.Fraction = +/- 1/64 In.Metric = +/- .05 MmAccuracy:Decimal = +/- .001 In.Fraction = +/- 1/500 In.Metric = +/- .05 MmBattery: 6 Months Life; Type CR2032Functions:- IN/NM- ON/OFF- ZERO- Auto Shut off"

Manufacturer: Frankford Arsenal Brand: Frankford Arsenal

Reloading ammunition requires attention to many critical cartridge dimensions, including case length, neck and base diameters, overall length, primer pocket depth, etc. Verifying these dimensions is quick and convenient with the Frankford Arsenal Calipers and Micrometers. The calipers are accurate to within .001" and the Micrometers are accurate to within .0001". The calipers allow you to measure inside and outside diameters, plus depths. You will find them useful for many measuring tasks on and off the reloading bench.

Manufacturer: Generic

Manufacturer: Brand new Brand: Brand new

Features: Includes 5 interchangeable depth rods (1", 2", 3", 4" and 5") to extend the measuring depth to 16". 3-Reading functions: inch, metric, & fractional Spring loaded movement for easy use Use as an indicator or depth gage Large LCD display 4-48 Thread interchangeable carbide tipped point Resolution: 0.0005" / .01mm / 1/64" Indicator travel: 1" Measure range: 0 - 16" / 400mm Accuracy: 0.001" IP54 Protection from fluids and dust.

Manufacturer: Generic Brand Brand: Generic Model: OZA334-A3

This Digital Shore A Hardness Durometer is just for you. You could get this item at an unbeatable price! This pocket sized digital durometer with round shape and large LCD display. This high quality and durable hardness durometer is used for testing the objective with low hardness. With this sensitive, efficient, accurate and portable durometer, there will be no more trouble to measure the hardness! This Shore A Hardness Meter is suitable for measuring low hardness things, such as rubber,leather and wax. The tester is featured with wide measuring range from 0 to 100 HA, and it also has data hold function and zero button for self calibration. Features: Brand new in box With clear LCD display for easy to read Compact pocket size to take along Wide measuring range with high resolution 35°angle with 0.5HA resolution Easy to store with plastic box Button battery is included Perfect for low hardness things, such as rubber, leather & wax Main Functions: On/off switch: power on and off H key: hold the reading Zero function: reset the readouts Specification: Range: 0-100HA Resolution: 0.5HA Accuracy: no more than ±1% Power:1.5 cell Working temperature: 0- 40 ℃ Flat cone point: 0.79mm diameter Pressure needle top cone angle: 35° Total measure force: 8.1N Durometer dimension: 3 1/4"L x 2 1/4"W x 1"H Package Content: 1x Digital shore A hardness durometer 1x Plastic box with foam 1x Button cell battery (installed)

Manufacturer: ykwjc Brand: NOBLE HARDWARE Model: GJ00010BL Color: Silver

Resolution: digital indicator: 0.01mm/0.0005＂, 0.01mm/0.001＂ Digital micro-indicator:0.001mm/0.00005＂ Measuring range: digital indicator: 0 ~ 12.7mm/0.5＂, 0~25.4mm/1＂ Digital micro-indicator: 0~5mm/0~0.2＂,0~12.7mm/0.5＂,0~25.4mm/1＂ Power: one sliver oxide batter (SR44) with work voltage 1.5v. Operating temperature: 0℃~40℃ Storage temperature:-20℃~70℃ Relative humidity:≦80% Application instruction for digital indicator important 1. The response speed: ≦0.5m/s 2. Avoid shocks, impact, dropping etc.; otherwise it will damage the appearance and precision 3.Keep indicator face clean, prevent liquid from getting into inside. 4. Do not remove output connector lid without using output interface. Output en should never be connected with metal. Doing so could damage your indicator. 5. Do not connect any part of digital indicator with voltage; otherwise it will damage the circuit.6. Must take out the battery if not in use for a long time Usages of type II：Clean the contact point and spindle with a soft cloth before using. Press the in/mm switch or push the spindle.The .00mm or .000mm display appears,the indicator is now ready for measurement. Usages of the "M" button; Display holding:press "M" button, "H" appears and display is holding. Fast display:press "M" button, "H" appears and press zero button, "F.T" appears,and now display is fast. Press "M" button to end fast display after measuring and "F.T" disappear. Fast tracing of maximum value: Button, "HMAX" appears,then press zero-setting button, "F.T MAX" appears and now is tracing of maximum value. Press "M" button to end tracing of maximum value after measuring and "F.T MIN" disappear. d.Fast tracing of minimum value: press three times "M" button,"HMIN" appears,then press zero-setting button,"F.T MIN" appears and now is tracing of minimum value after measuring and "F.T MIN" disappear.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-222-708-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Grizzly Brand: Grizzly Model: G9284

Easy to read Black Face Dial Caliper feature .001" graduations, hardened and ground stainless steel main beams with hardened, ground and lapped measuring faces. Knurled thumb roll and 360deg adjustable bezel make inside, outside and depth and step measurements quick and precise. Each includes protective case.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-248-004-1

The Fowler 52-248 series outside micrometer has a flat anvil/spindle pair with a choice of measuring range and 0.01mm graduations for general purpose measuring. The Vernier scale has 0.01mm graduations and an accuracy of 0.001mm for precise readings and accurate measurements. The anvil/spindle pair has a 6.5mm diameter, 0.00076mm flatness, and 0.000125mm parallelism on the 0 to 25mm micrometer for accurate measurements. Hardened, ground, and micro-lapped measuring faces provide wear resistance. The hardened, ground, and lapped spindle thread provides smooth movement, accuracy, and long life. Friction thimble applies constant force for repeatability between users. Friction-style thimbles are suitable for one-handed operation and stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The ratchet-stop thimble can be used independently of the friction thimble. It provides an audible sound and stops the spindle from turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. A satin chrome finish on the thimble and sleeve helps reduce rust and glare providing durability and long life, and microfine graduations help ensure accurate readings. The baked-enamel frame provides durability and long life. The micrometer includes a wrench and a fitted case. Micrometers 50mm and above include a standard. SpecificationsDisplay type Vernier scale Anvil/spindle style Flat Measuring range Varies Graduation interval 0.01mm Accuracy 0.001mm for 0 to 25mm micrometers Thimble style Friction or ratchet Anvil/spindle diameter 6.5mm Flatness 0.00076mm Parallelism 0.000125mmMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. ...