Calipers - Page 208

Manufacturer: Starrett Brand: Starrett Model: 120A-6 Color: White

The Starrett dial caliper has sharp black graduations every 0.100" on the no-glare, satin-finished stainless steel bar, and graduations on the dial every 0.001". One full revolution of the dial is equivalent to 0.100". These calipers have knife-edge contacts for measuring both inside dimensions (ID) and outside dimensions (OD). The knife-edge contacts can be used to scribe parallel lines on the workpiece. This caliper can be used with one hand through operating the fine adjustment roll with the thumb. The lock screw locks the dial bezel and holds the sliding jaw in position. The depth rod is integrated into the rack of the caliper, unlike many calipers which offer a detachable depth rod, or none at all. The hardened stainless steel components, including the bar, measuring surfaces, rack, gears, and depth rod, offer corrosion resistance, increased accuracy, and long life. Positive split gear anti-backlash control offers increased accuracy over standard gear configurations. Backlash is the amount of clearance between mated gear teeth in the caliper controls, which prevents the gear teeth from jamming. It is undesirable to have much backlash due to the lack of precision offered by the increased amount of play between gears. Certain gear designs can minimize or eliminate backlash; split gear systems actually split the gear into two gears, each half as thick as the original gear. One of these gears is then fixed to the shaft while the other gear is allowed to turn. The free-turning gear is connected to coil springs that rotate it until all of the backlash in the control system has been eliminated. The rack teeth point down to keep foreign matter from clogging the gear operations. This prevents measurement errors where metal chips could interfere with proper caliper operation. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machinin...

Manufacturer: Linsen Tool Co.,LTD Brand: Linsen

Each set of Metric thread plug gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO.We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for reference.

Manufacturer: Newtry Brand: Newtry®

Usually the product should take about 6--13 business days to arrive your hand after your payment is confirmed Major performances Type D: applicable to hard rubber, hard resin, acrylic, glass, cushiony plastic cement, printing plates, fiber, etc. This hardness gauge conforms to the regulations of GB/T531-99, GB2411-80, hg/t2489-93, JJG304-2003. Technical Parameter Types: Type D Calibration Value:0-100HD Resolution :1 HD Pressure Head Size:Φ1.25 mm End pressure of Pressure Head:0-44.5 N Pressure Needle Range:0-2.5 mm Apparatus Weight:0.3 Kg Attention:  we will send the product to you as soon as possible  If you have any questions , please feel free to contact us 

Manufacturer: Westward Brand: Westward

Precision Measuring Tool Kit, Number of Pieces 4, Micrometer 0-1 In/.0001 In, Ratchet, Chrome, Caliper 0-6 In,Shockproof,Chrome, Includes Micrometer, Caliper, Depth Micrometer, and 2YNF4 6 In Steel Rule

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 64PKA077B

Digimatic Tool Kit, 0-1"/0-25mm Range Digimatic Friction thimble type Micrometer, 0-6"/0-150mm Range Digimatic Caliper, Mahogany Case.

Manufacturer: Mitutoyo America Corporation Brand: Mitutoyo Model: 209-906

Mitutoyo Digital Caliper Gage 209-906, Internal Tube Thickness Measurement Type, 1.38-2.95In, .001In, 132mm Depth.

Manufacturer: Mitutoyo America Corporation Brand: Mitutoyo Model: 209-908

Mitutoyo Digital Caliper Gage 209-908, Internal Tube Thickness Measurement Type, 2.95-4.52In, .001 In, 5.21In Depth.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 209-551

The Mitutoyo 209 series Digimatic internal tube thickness caliper gauge has a combination analog/digital LCD display and large measuring depth for taking inside dimension (ID) measurements of hole diameters, thickness of grooves or tubes, and other hard-to-reach internal dimensions. Depending on the model, these units may come with either ball contact points suitable for measuring internal wall thickness of tubes, or disc contact points suitable for measuring flat surfaces. The calipers have an Ingress Protection 67 (IP67) rating, which ensures that components are resistant to debris and to submersion in liquid under standard conditions for up to 30 minutes. At minimum, functions include zero-set, preset, automatic power off, inch/metric, and conversion data hold. An output port transmits results to a Mitutoyo miniprocessor or computer for statistical process control (SPC) through an interface cable (sold separately). The unit comes with, and is powered by, a single AA battery that lasts approximately 350 hours with continuous normal use. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the m...

Manufacturer: Mitutoyo America Corporation Brand: Mitutoyo Model: 209-919

Mitutoyo Digital Caliper Gage 209-919, External Tube Thickness Measurement Type, 0-2.3.6 In, .001 In, 169mm Depth.

Manufacturer: Bihood Brand: Bihood Color: Grey

✔ A must have for enjoyable life: Resolution: 0.01 mm ( 0.0005 in ). Used for industrial work, jewelry, gunsmithing, etc Easy to use, easy to carry and easy to clean. 4 way measurements: inside, outside, step and depth from 0 mm to 150 mm ( 0 in to 6 in ). ✔ Specification: Dimension - 22.8 cm x 7.5 cm ( 8.98 in x 2.95 in ) Weight - 50 g ( 1.76 oz ) ✔ Package included: 1 x 150mm Vernier Caliper ✔ For Optimal Use: Avoid being exposed to direct sunlight. Keeping in cool place will make it look like new one even though it has been used for years.