Calipers - Page 202

Manufacturer: iGaging Brand: iGaging

This NEW, Extra Large Readout Digital Caliper is a must for every woodworker. The hardened Stainless Steel Caliper is ideal for checking bushings, drill bits and sizing work where a precise fit is required. Measures in inches, metric and fractions with the press of a button. A locking screw allows you to lock the caliper in position for measuring, and it also has a Inchzero Inch button that resets the caliper prior to or after use. This caliper is resistant to humidity and dust. It has a measuring range of 0-4 Inch (0-100mm), and is accurate to 0.0005 inches (0.01 mm). Supplied in a protective plastic case with a spare battery.

Manufacturer: Grizzly Brand: Grizzly Model: T24515 Color: brown

These double-ended Calipers are necessary for gauging the wall thickness of turned bowls and measuring spindle diameters. One end does the gauging and the other end indicates the thickness or diameter. Three different calipers in each set are shaped for any turning application. 8" set.

Manufacturer: Groz Brand: Groz

Groz 01473 Outside Caliper 8" (200mm) are equipped with adjustable knurled thumb screw. These calipers were designed for reliable, accurate layout and measurement jobs to take comparative measurements when used with a micrometer. These are used by toolmakers and all mechanics who require finer adjustment and better balance measuring tool. These are for measuring outside dimensions. Manufactured from high grade steel, the legs are machined to a smooth taper. Fulcrum stud has a large bearing surface preventing side deflection of legs. Divider points are hardened 50-55 HRC for increased wear resistance

Manufacturer: Woodtek Brand: Woodtek

Cuts layout time and errors. These hardened stainless steel vernier calipers are precision instruments that can measure internal, external, step and depth dimensions: This caliper has metric scale on bottom, inch scale on top: 0-6" (0. 001"), 0-150mm (1mm). Fixed adjustment knob. Cross-reference table on back. 9" long, 5 oz. Each caliper has a locking set screw for batch measurements and comes in a padded, rigid plastic storage case. Imported.

Manufacturer: AB Tools Brand: AB Tools

Digital Vernier Specifics: -Professional tool for commercial or occasional use -Precision made Vernier Caliper -Features a large LCD Screen for easy use. -Carbon fibre construction so lightweight to use but till strong enough to last -Suitable for both internal and external sizes. -Also can measure hole / thread depth with the built in depth stop. -Simple way to make accurate measurements of internal and external distances up to 150mm -Includes depth measuring tool -Can display in metric or SAE (imperial sizes) -Measuring range 0 - 150mm / 0 - 6" -Accuracy plus or minus 0.02mm (0 - 100mm) range and plus or minus 0.03mm (100mm plus range) -Accuracy is also effected in areas of very high humidity (over 80%)Bore Gauge Specifics: Chrome-plated steel. Locking knurled handles and automatically self-centring plungers with constant spring tension for uniform contact pressure Quick inside measuring of cylinder or hole bore by transferring dimension for external measurement. Indirect measurement by outside micrometerIncludes: A: 8 - 12.7mm (5/16" - 1/2") B: 12.7 - 19mm (1/2" - 3/4") C: 19 - 32mm (3/4" - 1-1/4") D: 32 - 54mm (1-1/4" - 2-1/8") E: 54 - 90mm (2-1/8" - 3-1/2") F: 90 - 150mm (3-1/2" - 6") Chrome plated Range: 8 - 150mm 150mm gauges

Manufacturer: Empire Level Brand: Empire Level Model: 2787

8 3/4in.-long fiberglass reinforced nylon body with milled jaws for precision. 6in. capacity by .01 and 64ths. Thumbscrew lockout; adjustable Bezel for realignment to 0. Makes 4-way measurements: inside, outside, depth and step. U.S.A. Caliper Type: Dial, Range (in.(mm)): 0.01, 64ths, Jaw Size (in.): 6, Case Included: No, Display Type: Dial, Capacity: 6, Material: Fiberglass reinforced nylon, Single, Pair, or Set: Single, Length (in.): 8 3/4, Measures: Inside, outside, depth, step

Manufacturer: HK Brand: dipshop Color: As show the picture

Model Number:0-150mm(0-6") vernier caliper Measuring range:0-150 mm / 0-6" Resolution:0.01mm/ 0.0005 inch Units mode:mm and inch Display:LCD Body material:stainless steel Max. measuring speed:1.5m/sec 100% Brand New 0-6" (0-150mm) LCD digital vernier caliper. Size:23.4 x 7.6 x 1.3 cm Electronic Digital Vernier Caliper: Made of hardened stainless steel Base measuring function: Inside, outside, depth and step measuring Linear capacitive measuring system Zero setting in any position With a small locking thumb screw which locks the jaws in place Base measuring function: Inside, outside, depth and step measuring An ideal tool for a broad range of industrial measuring 1. Internal measuring jaws 2. METRIC/INCH change over 3. Locking screw 4. LCD display 5. External measuring jaws 6. Power of button 7. Zero setting and power on button 8. Battery cover 9. Depth measuring blade 10. Step-measuring faces MAINTENANCE INSTRUCTIONS: 1. Clean caliper bar with dry cotton fabrics before using in order to avoid mad display of caliper caused by humidity, 2. Keep the caliper clean and dry (Liquid can damage the slider), 3. Faces should be cleaned gently with cotton fabrics. Never use petrol, acetone and other organic solutions. 4. In order to save power, turn of the unit when caliper is going to stay idle for some time. 5. Never apply and electric pressure on any part of the caliper and never use an electric pen for the fear of damaging its chip. 6. For other notes please refer to the conventional calipers. 7. Accidental wrong display may happen while replacing the battery, just take outthe battery and the put it in again after more than 30 seconds until the display returns to normal Package Included: 1 x Vernier Caliper

Manufacturer: Allstar Performance Brand: Allstar Model: ALL96411

Allstar Digital Caliper with Protective Case has a range of .001 inches through 6 inches measuring in .001 inch increments. A quality protective carrying case is also included. These digital calipers measure inside, outside and depth dimensions with an easy to read metric or SAE lcd display. It features an on/off switch that conserves the battery and a zero setting switch which assures accurate readings. The carrying case also provides for additional battery storage. It is backed by a 90-day limited factory warranty and is sold individually.

Manufacturer: SRA Measurement Brand: Machine DRO Color: Silver

Included with the Digital Caliper - Battery, instructions and storage case. Key SpecificationsMeasuring Range - 0-150mm (0-6 inch).Resolution - 0.01mm (0.0005 inch).Battery - 1.5V SR44.Display Height - 7mm.Pin Diameter - 2mm.Pin Length - 5mm.Jaw Depth - 41mm (1 5/8 inch).Working Temperature - 0 ~ 40C. The display can also be set to zero at any position.

Manufacturer: Flexbar Brand: Flexbar

Quality Swiss Style Black Face Dial Calipers feature Extra smooth movement and Swiss Body design. Black Face With orange needle. Main beam is stainless steel, Hardened and lapped. Covered rack Provides Protection against chip interference. .001 Reading,100 revolution on All Calipers. 360 Degree bezel locks for Zero Setting. 4-way Measurement - inside, Outside, step and Depth. Satin chrome Finish. Each Caliper supplied in its own fitted Case. Model No. 15780, 0-6" Black Face Dial Caliper