|
|
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $197.72
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 54-554-711-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 54-554-711-0
|
The Fowler External Electronic Caliper Gage measures outside dimensions (OD) with 0.0008"/0.02mm accuracy and 0.0005"/0.01mm resolution, and has a digital, single-value readout LCD, absolute and incremental modes, and RS-232 output. This caliper measures OD for hole diameters and groove and tube thicknesses. The digital, single-value readout LCD shows inch and metric units for versatility when measuring. The unit has absolute and incremental modes for taking intermediate or differential measurements and stores a preset reference for comparing measurements. The caliper is spring-loaded in the measuring direction for a consistent measuring force and improved measurement repeatability. A thumb lever retracts the movable point. The caliper has a 2"/5cm diameter plastic electronic housing, steel arms, and hardened steel contact point for durability. This caliper can output data via direct RS-232 for capturing and recording data. The caliper uses a 3V CR2032 battery (included). It also comes with an aluminum case with foam inserts to cushion the instrument. Digital calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The reading is electronically generated and displayed on a digital, high-resolution screen as a single value. Digital calipers can take differential measurements that are used to determine the difference in measurements between two objects, by zeroing the display at any point along the scale. Some digital calipers can switch between standard and metric units, and some can output readings to a computer or printer for recording measurements. Caliper gages are used in production settings where specific diametrical or thickn...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $221.87
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 54-554-723-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 54-554-723-0
|
The Fowler External Electronic Caliper Gage measures outside dimensions (OD) with 0.0008"/0.02mm accuracy and 0.0005"/0.01mm resolution, and has a digital, single-value readout LCD, absolute and incremental modes, and RS-232 output. This caliper measures OD for hole diameters and groove and tube thicknesses. The digital, single-value readout LCD shows inch and metric units for versatility when measuring. The unit has absolute and incremental modes for taking intermediate or differential measurements and stores a preset reference for comparing measurements. The caliper is spring-loaded in the measuring direction for a consistent measuring force and improved measurement repeatability. A thumb lever retracts the movable point. The caliper has a 2"/5cm diameter plastic electronic housing, steel arms, and hardened steel contact point for durability. This caliper can output data via direct RS-232 for capturing and recording data. The caliper uses a 3V CR2032 battery (included). It also comes with an aluminum case with foam inserts to cushion the instrument. Digital calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The reading is electronically generated and displayed on a digital, high-resolution screen as a single value. Digital calipers can take differential measurements that are used to determine the difference in measurements between two objects, by zeroing the display at any point along the scale. Some digital calipers can switch between standard and metric units, and some can output readings to a computer or printer for recording measurements. Caliper gages are used in production settings where specific diametrical or thickn...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $221.87
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 54-554-724-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 54-554-724-0
|
The Fowler External Electronic Caliper Gage measures outside dimensions (OD) with 0.0008"/0.02mm accuracy and 0.0005"/0.01mm resolution, and has a digital, single-value readout LCD, absolute and incremental modes, and RS-232 output. This caliper measures OD for hole diameters and groove and tube thicknesses. The digital, single-value readout LCD shows inch and metric units for versatility when measuring. The unit has absolute and incremental modes for taking intermediate or differential measurements and stores a preset reference for comparing measurements. The caliper is spring-loaded in the measuring direction for a consistent measuring force and improved measurement repeatability. A thumb lever retracts the movable point. The caliper has a 2"/5cm diameter plastic electronic housing, steel arms, and hardened steel contact point for durability. This caliper can output data via direct RS-232 for capturing and recording data. The caliper uses a 3V CR2032 battery (included). It also comes with an aluminum case with foam inserts to cushion the instrument. Digital calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The reading is electronically generated and displayed on a digital, high-resolution screen as a single value. Digital calipers can take differential measurements that are used to determine the difference in measurements between two objects, by zeroing the display at any point along the scale. Some digital calipers can switch between standard and metric units, and some can output readings to a computer or printer for recording measurements. Caliper gages are used in production settings where specific diametrical or thickn...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $254.95
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 53-762-101-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 53-762-101-0
Fowler's Portable Durometer is just right for testing the hardness of flexible materials such as rubber and plastics. These gages conform to shore scales. Test pieces should have a thickness of at least .20"/5mm to provide accurate readings that conform to Shore A hardness scales and at least .12"/3mm for Shore D hardness scales. Manufactured in accordance with DIN, ASTM, ISO and JIS specifications. This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims. Â Fowler, an American company, manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $260.77 1% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Inspection report with a declaration of conformity
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $269.99 1% OFF
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-085-024-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-085-024-0
|
The Fowler Full Warranty 52-085-024-0 master inch/metric vernier caliper measures in inches and metric, has a 0.001"/0.02mm graduation, and two-way jaws for measuring the inside diameter (ID) and outside diameter (OD) of holes, and grooves. Long jaws provide access to hard-to-reach areas and improved accuracy over longer measuring ranges. The open-face design allows both vernier scales to be located on one side of the gauge for both inch and metric measurements. A fine-adjustment screw ensures accurate measurements, and a locking screw secures the measurement tightly in place for accurate readings. An extra-long vernier ensures accuracy. Sharp black graduations and wide-spaced microfine graduations on a satin-finished beam allow ease of reading. Raised sliding surfaces prevent wear of graduations for accuracy and long life. Verniers can be adjusted as wear occurs over time, and ground and lapped measuring faces ensure accuracy and wear resistance. Hardened stainless steel construction provides durability and wear resistance. The caliper includes a fitted case. This product has a 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.Vernier calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The main scale is engraved directly on the beam while the vernier scale is engraved on the slider mechanism. The base measurement is taken from the long beam, which provides the initial whole measurement in inches, centimeters, or millimeters. To obtain the total measurement, the base reading is added to the vernier scale reading, which provides fractional measurements in inches or millimeters. A locking mechanism provides the ability to take dif...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $307.00 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 36-24
Manufacturer: Starrett
Brand: Starrett
Model: 36-24
|
The Starrett 36-24 lock joint transfer-type outside caliper with fine adjustment has a leg length of 24†(600 mm) but opens to approximately one-third larger than the leg length. Inwardly curving leg tips measure the external size of an object. Legs are made from high-grade steel and are ruggedly constructed and well-finished. The locking joint can be quickly and firmly locked by a partial turn of the large knurled disc. Transfer arm allows the user to transfer measurements from awkward places where it is necessary to move the legs after they have been set to size. The adjusting screw permits fine adjustment for very accurate measurements. Knurled adjusting nut makes the final adjustment after the legs have been set to approximate size and the joint has been locked. The spring washer under the disc maintains proper leg tension when the joint is loosened. Curved tips transfer the measurement of the external size of an object. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used also for measuri...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $518.97 75% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 1175MZ
Color: Yellow
Manufacturer: Starrett
Brand: Starrett
Model: 1175MZ
Color: Yellow
|
The Starrett 1175MZ Dial Indicator 81-181-1175 Groove Gauge is used for measuring inner diameter (ID) grooves and internal recesses, reads to 0.01 mm, has a dial reading of + or - 100 graduations, and a total measurement range of 2.5 mm. Two sets of interchangeable jaws measure to gauging depths of 32- and 64-mm, and three sets of interchangeable contacts are used with 9.5 - 150-mm bore diameters, 2.5 - 6.7-mm groove depths, and 0.6 - 1.3-mm groove widths. The moveable gauging contacts have a 12.7-mm retractable range, are made from hardened steel and have a chrome finish for long life, and flush ends for gauging blind holes. The fixed lower jaw supports the weight of the gauge and the operator’s hands, preventing incorrect gauging pressure and false readings. A fine adjustment screw and lock help provide additional accuracy. Dial indicators may also be called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Standard dial indicators measure the displacement along the axis of the indicator. Dial indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation. The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $521.07 27% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 209-355
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 209-355
Color: White
|
The Mitutoyo 209 series internal measurement dial caliper gauge has a dial display and large measuring depth for taking inside dimension (ID) comparison measurements in standard inch units of hole diameters, thickness of grooves or tubes, and other hard-to-reach internal dimensions. They should be used with a setting ring or micrometer (sold separately). Depending on the model, the caliper may come with ball contact points suitable for measuring external wall thickness of tubes, chisel contact points suitable for measuring flat surfaces, or an interchangeable set of contact points. The calipers’ jaws are spring loaded, which provide the point contacts with constant measuring pressure. The calipers have an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The digital caliper takes a differential by zeroing the...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $563.00 1% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
|
The Brown & Sharpe 00591003 comes with the 599-100 0â€-1.2†Micromaster “Easy†Micrometer and the 00590301 0â€-6†Dura-Cal IP67 Caliper. The micrometer features .0001†accuracy on outside diameter measurements, and the caliper features .001†accuracy on outside diameter (OD) measurements, and .0015†on inside diameter (ID) measurements. The set features full protection from oil and coolant splashes, and solid particles, and an electronic measuring system protected from liquids and immune to magnetic fields. Encapsulation of the main components prevents the caliper from dust, particles of metal, and liquid spray. The set comes in a molded plastic carrying case. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Micrometers are used widely for precise measurement of small distances. Duo tool sets that utilize calipers and micrometers are commonly used in mechanical engineering and machining, as well as most mechanical trades, to accurately measure parts. Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001 and is headquartered in North Kingstown, RI. What’s in the Box 0â€-1.2†micrometer 0â€-6†caliper Molded plastic carrying case
|
|