Calipers - Page 235

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-095-025-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: GAL Gage Brand: Gal Gage Model: Cat # 13

GAL Gage 13 Dial/ Pit Depth Gauge, Wood Case

Manufacturer: Generic Brand: Generic

Bottom surface of the base is hardened and ground lapped for flatness.

Manufacturer: Mitutoyo America Corporation Brand: Mitutoyo Model: 209-904

Mitutoyo Digital Caliper Gage 209-904, Internal Measurement Type, .60-2.17In, .001In, 127mm Depth.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 209-557

The Mitutoyo 209 series Digimatic internal tube thickness caliper gauge has a combination analog/digital LCD display and large measuring depth for taking inside dimension (ID) measurements of hole diameters, thickness of grooves or tubes, and other hard-to-reach internal dimensions. Depending on the model, these units may come with either ball contact points suitable for measuring internal wall thickness of tubes, or disc contact points suitable for measuring flat surfaces. The calipers have an Ingress Protection 67 (IP67) rating, which ensures that components are resistant to debris and to submersion in liquid under standard conditions for up to 30 minutes. At minimum, functions include zero-set, preset, automatic power off, inch/metric, and conversion data hold. An output port transmits results to a Mitutoyo miniprocessor or computer for statistical process control (SPC) through an interface cable (sold separately). The unit comes with, and is powered by, a single AA battery that lasts approximately 350 hours with continuous normal use. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the m...

Manufacturer: WIHA Brand: Wiha Model: 41103

Wiha 41103 six inch CaliMax Vernier Caliper with .1mm/ 1/64 inch accuracy. It does inside, outside, depth and step measurement. Almost parallax free reading of the measurement value. Neon green vernier scale in with strong contrast for optimal reading. Vernier for millimeter and inch display. Made of durable 60 percent fiberglass fill, non magnetic, non corroding.

Manufacturer: Carrera Precision Brand: Carrera Precision Model: CP8808-T

Features »Extra Large easy to read digital LCD screen.»Accurate to 1/1000th of an inch»Four methods of measurement: Inside, outside, depth and step from 0'' to 8''»Metric conversion & zero buttons»Titanium Alloy head»Standard Strong stainless steel frame»Stepped end depth rod for measuring small holes up to 8'' deep»Thumb wheel allows for easy, one-handed adjustment»Screw lock can lock the caliper at a set dimension for multiple measurements»Zero button lets you zero the measurement at any position. Great for measuring tolerances in the positive and negative.Specifications »Resolution 1/64" - 0.0005"/ 0.01mm.»LCD Display»Max Measuring Speed: 1.5 m/sec., 60 in/sec»Measuring System: Linear Capacitive Measuring System»Measuring Range: 0-203 mm/0-8 in»Resolution: 0.01mm/0.0005in.What's In The Box? »Carrera Precision Titanium 8-Inch Digital Caliper»Extra Battery»Mini Screw Driver»Custom Fitted Storage CaseWarranty »30 Day Satisfaction Guarantee.

Manufacturer: ezMachineTools Brand: ezMachineTools

This 12" dial caliper black a face has range of 0-12" and a graduation of 0.001". It comes in stainless steel body including bar, rack, gear, rod, etc. and with shock proof and screw on rack features. Case is included in this set.

Manufacturer: Hawk Importers Brand: Hawk Model: H-TM48003

Super affordable vernier caliper for science project and classroom use. Perfect for learning how to use calipers! Measurements in both inches and millimeters! Features: * Dual unit measurements: inches and millimeters * Precision: 1/128 inch or 0.05 mm * Maximum measurement: 3.25 inches or 80 mm

Manufacturer: Sona Enterprises Brand: SE Model: 787BC

Measure small items and spaces in either inches or millimeters with this solid brass caliper, with a compact size that makes it easy to carry around inside your pocket or tool case. Features of this product include: • Units: inches & millimeters • Resolution: 1/32” & 0.01mm • Gauge: 2.5 inches • Brass caliper body • Made in India Important: Avoid getting counterfeit items. Genuine SE products come with our SE logo on the packaging. SE is committed to providing the customer with the best possible source for value. You will enjoy the quality, function and usefulness this 2-½" Brass Caliper has to offer. SE is a registered trademark protected by US Trademark Law.