Calipers - Page 240

Manufacturer: uxcell Brand: uxcell Model: a12052400ux0018

Yellow Black Handle Fuel Tank Oil Gauging Tape 10MSpecifications:Features:Long steel tape measureWith a brass wightRubber coated handle and aluminum alloy bodyProvides greater resistance to wear and corrosionIdeal for gauging clear oils

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-520-110-2 Color: White

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-520-110-1 Color: Black

Fowler 52-520-110-1 Brass Premium dial indicator has an American Gage Design (AGD) Group 2, 2-1/4" dial face with a continuous dial, a 0-1" measuring range, 0.001" graduations, a revolution counter, and tolerance markers, and is designed to measure surface variations in fractions of an inch. The 0-100 continuous dial with revolution counter has a total measuring range of 0-1" with each revolution equal to 0.1". An adjustable bezel and dial sets the zero reading at any location. Tolerance markers allow operators to observe limits at a glance. The carbide ball contact point provides durability and long life. This product has a 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims. Dial readings with two digits, 0-100 for example, indicate the dial has a continuous dial. Balanced dials are used for reading the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Dial indicators are also called dial gauges, probes, and electronic indicators. These precision instruments measure small linear distances and object sizes. The dial magnifies the measurement so that it can be easily read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation. Fowler, an American company, manufactures inspection and mea...

Manufacturer: Dial Thickness Gages Brand: Dial

For measuring paper, leather, sheet metal, rubber, plastic, etc. With case.

Manufacturer: WOODSTOCK Brand: Woodstock Model: D4042

These 6-Inch Digital Calipers let you switch between decimal and fractional-Inch and millimeters. Large digital readout makes precision measurements easy with a resolution of 0.0005-Inch. Features include hardened stainless steel jaws and beam, thumb roll, lock knob, zero reset button and an absolute and relative measurement function.

Manufacturer: Central Tools Brand: Central Tools Model: 6628

This has a fine line indicator hand. It measures the inside, outside, depth and step. The dial display is easy to read. This thumb lock caliper is accurate and easy to use.

Manufacturer: Shifu Ltd.

Stainless steel hardened frame, complete with fitted plastic case.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-059-016-0

The Fowler 52-059-016 stainless steel inch/metric vernier caliper has a 6"/150mm measuring range, a 0.001"/0.02mm graduation, and four-way jaws for measuring the inside diameter (ID) and outside diameter (OD) of holes, grooves, and tube thicknesses, and depth and step measurements of bores and grooves. An extra-long vernier ensures accuracy. A depth rod can be read directly from the vernier scale. Sharp black graduations on a satin-finished bar ease reading, and a thumb lock holds the measurement in place for accurate reading. Raised sliding surfaces prevent wear of graduations for accuracy and long life. Ground and lapped measuring faces ensure accuracy and wear resistance. Hardened stainless steel construction provides durability and wear resistance. The caliper includes a fitted case. Vernier calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The main scale is engraved directly on the beam while the vernier scale is engraved on the slider mechanism. The base measurement is taken from the long beam, which provides the initial whole measurement in inches, centimeters, or millimeters. To obtain the total measurement, the base reading is added to the vernier scale reading, which provides fractional measurements in inches or millimeters. A locking mechanism provides the ability to take differential measurements for determining the difference in measurements between two objects. Compared to digital and dial calipers, vernier calipers are more durable because they do not have internal moving parts, and are less prone to inaccuracy caused by shock, debris, and other contaminants, but they can be more difficult to read than digital...

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-520-485-0

The Fowler 52-520-485 dial indicator has an American Gage Design (AGD) Group 2, 2-1/4" dial face with a continuous dial, a 0-1" measuring range, 0.001" graduations, a revolution counter, and tolerance markers, and is designed to measure surface variations in fractions of an inch. The 0-100 continuous dial with revolution counter has a total measuring range of 0-1" with each revolution equal to 0.1". An adjustable bezel and dial sets the zero  reading at any location. Tolerance markers allow operators to observe limits at a glance. The carbide ball contact point provides durability and long life. The magnetic back can be used to mount the indicator on most metal surfaces, and a protective coating provides durability and long life. This product has a 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims. Dial readings with three digits, 0-10-0 for example, signify that the indicator has a balanced dial. Dial readings with two digits, 0-100 for example, indicate the dial has a continuous dial. Balanced dials are used for reading the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Specifications Dial face type and diameter AGD Group 2, 2-1/4" diameter face Dial type and reading Continuous 0-100 Range and graduations 0-1" Graduations 0.001" Revolutions Up to 10 revolutions, each revolution equal to 0.10" Mounting Magnetic back Specifications AGD Group 2   Dial indicators are also called dial gauges, probes, and electronic indicators. These precision instruments measure small linear distances and object sizes. The dial magnifies the measurement so that it can be easily read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or tra...

Manufacturer: Grizzly Brand: Grizzly Model: H8187

Don't settle for a right handed calliper if your left handed. This large LCD display 8" Digital Caliper features inch/metric conversion, zero reset, 0.0005" resolution and 0.001 accuracy. Includes fitted case and spare battery.