Insulation Resistance Meters - Page 23

Manufacturer: Megger Brand: Megger Model: 242011-30

The Megger 242011 series duplex test lead with helical spring-point duplex hand spikes is for use with Megger 247100, 247101, DLRO10HD, DLRO10, and DLRO10X digital low-resistance ohmmeters. This duplex test lead measures both current and resistance when taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The lead has a maximum test current input of 10 amp. The helical spring-point hand spikes compress and rotate to make contact with a conductor. There is 0.4" (10 mm) between the current and potential probe tips on the duplex hand spikes.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is ...

Manufacturer: Megger Brand: Megger Model: 6410-919

The Megger BM15 5kv insulation resistance tester measures insulation resistance and voltage in electrical installations, building maintenance, and telecom systems. This analog meter has manual test voltage selection for flexibility of use. The unit has four test voltage options at 500, 1,000, 2,500, and 5,000V. The unit measures insulation resistance from 100 kilohms to 20 gigaohms and voltage from 0 to 600V alternating current (AC). The tester is safety rated to European Standard EN61010-1, Category III, 300V and Category I, 600V. The Megger BM15 is commonly used by electricians, electrical contractors, and telecommunications workers.Specifications Power supply 8 AA batteries Voltage testing range 0 to 600V AC Test voltages 500, 1,000, 2,500, and 5,000V Insulation resistance range 100 kilohms to 20 gigaohms Weight 1.2kg / 2.6 lb. Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 Cat III 300V, Cat I 600V Dimensions 220 x 160 x 115mm / 8.9 x 6.3 x 4.5 inchesH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties. Electrical test meters display information either in analog form using a needle that moves on a calibrated scale, or in digital form using digits or a graphic representation on an LED screen. Meters have electrical properties that are to be measured and the anticipated range of results, and should have a rating that is higher than the maximum value of t...

Manufacturer: Megger Brand: Megger Model: 1001-940

The Megger MIT525-US insulation resistance tester measures insulation resistance, voltage, current, and capacitance in high-voltage electrical systems. This multiranging digital meter performs timed insulation resistance (IR), polarization index (PI), dielectric absorption ratio (DAR), dielectric discharge test (DD), step-voltage (SV), and ramp tests. The unit measures insulation resistance from 10 kilohms to 10 teraohms, voltage from 30 to 660V alternating current (AC) or direct current (DC), current from 0.01nA to 6mA, and capacitance from 10 nanofarads to 25 microfarads. The unit has test voltages in 10V steps from 50V to 1,000V and in 25V steps from 1,000 to 5,000V. It also has 250, 500, 1,000, 2,500, and 5,000V set test voltages. The tester is safety rated to European Standard EN61010-1, Category IV, 600V. It is Ingress Protection 65 (IP65)-rated to be dust-tight and protected against water sprayed from 6.3mm jets. The MIT525-US is commonly used by electricians, electrical contractors, and telecommunications workers.Specifications Insulation resistance range 10 kilohms to 10 teraohms Voltage range 30 to 660V AC/DC Current range 0.01nA to 6mA Capacitance range (above 500V) 10 nanofarads to 25 microfarads Power supply Rechargeable 11.1V Lithium-ion battery Weight 5.4kg / 10 lb. Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 Cat IV 600V Mechanical standard met IP65, for complete protection from dust and water sprayed rom 6.3mm jets Dimensions 315 x 285 x 181mm / 12 x 11 x 7 inchesH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to co...

Manufacturer: FLIR Systems Brand: Extech Model: MG300

View larger CAT IV Insulation Tester/MultiMeterwith Wireless PC Interface The MG300 is a True RMS multimeter with built-in insulation resistance tester with the added safety of wireless data streaming for remote monitoring and datalogging. By adding insulation testing capabilities to the ubiquitous digital multimeter, electricians are always equipped for insulation testing, helping to make it a more routine part of predictive maintenance with faster troubleshooting and repairs without additional tools. Features Overview The rugged and waterproof (IP67-rated) combination meter includes a digital insulation resistance tester (or megohmmeter) with 4 different test voltages for measuring resistance up to 4 GΩ with 0.001MΩ resolution. The full-function, true RMS digital multimeter includes useful extras like duty cycle measurements and milliamp readings for analog 4-20mA current loops in industrial analog process controls. The CAT IV-rated meter’s wireless data streaming enables safer troubleshooting and maintenance on dangerous moving equipment and one-person operation of remote safety switches. Technicians can focus on finding problems by monitoring real-time readings on a laptop or computer screen from safe distances – up to 30 feet away. Includes The MG300 comes with remote USB receiver, Windows compatible software, test leads with alligator clips, Type K bead wire temperature probe with adapter, carrying case, 6 AA batteries, and user manual. The MG300 is available with NIST-traceable certification (model MG300-NIST). For users outside North America, the MG302 which transmits data at 433MHz instead of 915MHz is also available. View larger Key Features AC/DC Voltage AC/DC Current Resistance Capacitance Frequency(electrical & electronic) Duty Cycle Diode Test Insulation Resistance Continuity Thermocouple Temperature

Manufacturer: Extech Instruments Brand: Extech Model: MG300-ETK

Electrical Troubleshooting Kit Kit includes 3 compact tools that are indispensable at a customer site for electrical installation, troubleshooting, and repair: MG300 13 Function, Wireless, True RMS Multimeter/Insulation Tester with 1000V test voltage and 4000MΩ range; 42509 12:1 Infrared Thermometer with high/low alarm and fast 2-color display for processes that require temperature control and monitoring and MA430T 400A True RMS AC Clamp Meter with built-in non-contact voltage detector and ideal for noisy or non-sinusoidal AC measurement. 42509 Versatile Alerts Boost Productivity The rugged and waterproof (IP67-rated) combination meter includes a digital insulation resistance tester (or megohmmeter) with 4 different test voltages for measuring resistance up to 4 GΩ with 0.001MΩ resolution. The full-function, true RMS digital multimeter includes useful extras, like duty cycle measurements and milliamp readings for analog 4-20mA current loops in industrial analog process controls. The MG300 also has built-in wireless data recording for safer troubleshooting and maintenance on moving equipment, one-person operation of remote safety switches, and the ability to monitor real-time readings on a laptop or computer screen from safe distances – up to 30 feet away – to detect intermittent anomalies. 42509 Versatile Alerts Boost Productivity This fast-responding (150 ms) IR thermometer uses an innovative alert system: an audible alarm is complemented by an illuminated display that changes from blue for normal conditions to bright red for alarm conditions. This color-coded alert function enables users to scan areas and focus on identifying anomalies without stopping to constantly evaluate specific temperature readings. MG300 Insulation Tester/Multimeter with Wireless PC Interface The MG300 is a True RMS multimeter with built-in insulation resistance tester with the added safety of wireless data streaming for remote monitoring and datalogging. By adding insulation testing capabilities to this CAT...

Manufacturer: Megger Brand: Megger Model: MIT310-EN

The Megger MIT300 series insulation resistance tester measures insulation resistance, voltage, and continuity in electrical installations, building maintenance, and electrical testing. The average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform. The dual LCD screen indicates test results either digitally or with an analog arc function to replicate the response of analog meters. The tester measures insulation resistance from 0 to 1,000 megohms, voltage from 0 to 600V, and continuity from 0.01 to 100 ohms. The unit has a test inhibit function that prevents testing on circuits carrying over 50V. The tester is safety rated to European Standard EN61010-1, Category III, 600V. The unit is also Ingress Protection 54 (IP54)-rated for protection against dust and splashing water. The unit has a rubberized outer case for protection against bumps and short drops. The Megger MIT300 series is commonly used by electricians and electrical contractors.Specifications Continuity testing range 0.01 to 100 Ohms Insulation resistance range 0 to 1,000 megohms Voltage testing range 0 to 600V AC/DC Voltage test inhibit level 50V Power supply 8 AA alkaline or rechargeable batteries Weight 980g Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 Cat III 600V Mechanical standard met IP54, for protection from dust and splashing water Dimensions 203 x 148 x 78mm / 8 x 5.7 x 3.2 inchesH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function me...

Manufacturer: Extech Instruments Brand: Extech Model: MG300-NIST

MultiMate/1000V Insulation Tester with Wireless PC interface (915MHz). Wireless USB interface transmits measurement data to a PC. This product is NIST Certified which indicates that the product is traceable to standards provided by the National Institute of Standards and Technology (NIST).

Manufacturer: Amprobe Brand: Amprobe Model: AMB-45

Test insulation of wires, cables, transformers and electrical motors quickly and easily with this rugged tester.

Manufacturer: Megger Brand: Megger Model: 6410-956

The Megger 210600 insulation tester measures insulation resistance and voltage in electrical systems, generators, motors, and transformers. The autoranging digital meter has manual knob for test voltage selection. The unit has test voltages of 100, 250, 500, and 1,000V direct current (DC). The tester measures insulation resistance from 0 to 199.9 megaohms with the 100 and 250V test voltages and from 0 to 1,999 megaohms with the 500 and 1,000V test voltage and voltage from 0 to 600V alternating current (AC) or DC. The LCD screen indicates test results digitally. The tester is safety rated to European Standard EN61010-1, Category III, 300V line to ground and 500V line to line. The Megger 210600 is commonly used by electricians and electrical contractors.Specifications Insulation resistance range (100 and 250V test voltage) 0 to 199.9 megaohms Insulation resistance range (500 and 1,000V test voltage) 0 to 1999 megaohms Voltage testing range 0 to 600V AC/DC Power supply 6 AA batteries Weight 0.98kg / 2.2 lb. Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 Cat III, 300V line to ground and 500V line to line Dimensions 180 x 125 x 125mm / 7 x 5 x 5 inchesH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties. Electrical test meters display information either in analog form using a needle that moves on a calibrated scale, or in digital form using digits or a graphi...

Manufacturer: Ammoon Brand: ammoon

This digital insulation resistance tester has stable performance and reliable result. With large LCD display, easy to read.Features: Reliable insulation resistance tester with stable performance. Perfect protective function, it can withstand the impact of short-circuit and offset voltage. Locking function of test button, wide measurement range, convenient to use. Powered by 6 batteries(not included), with low power consumption. Voltage for your choice: 500V, 1000V, 2500V. Large LCD display, easy to read.Specifications: Voltage: 500V / 1000V / 2500V Measurement Range: 500V 2000MΩ: 10M-2000M 500V 20GΩ: 200M-20G 1000V 2000MΩ: 50M-2000M 1000V 20GΩ: 500M-20G 2500V 2000MG: 100M-2000M 2500V 20GΩ: 1000M-20G Resolution: 1M / 10M AC Voltage: 750V Resolution: 1V Current: Max.280mA Operating Temperature: 0-40°C Operating Humidity: 30%-80%RH Power Supply: 6 * 1.5V AA Battery (not included) Item Size: 18 * 11 * 5cm / 7.1 * 4.3 * 2in Item Weight: 441g / 15.5oz Package Size: 24 * 18 * 7.5cm / 9.4 * 7.1 * 3in Package Weight: 733g / 25.8ozPackage List: 1 * Insulation Resistance Tester(battery not included) 1 * Pair of Test Lead 1 * Pair of Test Clip