|
|
-
4.4 of 5.0 with 7 Reviews
SALE PRICE: $216.00 4% OFF
Manufacturer: Klein - Geneva Supply
Brand: Klein Tools
Model: CL2200
Manufacturer: Klein - Geneva Supply
Brand: Klein Tools
Model: CL2200
True RMS auto-ranging clamp meter measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency and duty cycle. Our meter tests non-contact voltage, diodes, and continuity.
-
4.4 of 5.0 with 34 Reviews
SALE PRICE: $219.99 1% OFF
Manufacturer: IDEAL
Brand: Ideal
Manufacturer: IDEAL
Brand: Ideal
' Clamp Meter, Digital, Clamp Meter Jaw Style Clamp On, Max. AC Amps 660, Max. AC Volts 750, Max. Ohms 999.9, Jaw Capacity 1-7/16 In., Counts 9999, Battery Type 9V, Safety Rating CAT IV 600V, CAT III 1000V, AC Response Average, Audible Continuity Yes, Capacitance 999.9, Peak Hold Yes, Display 4 Digit LCD, Includes Leads, Alligator Clips, Case, Instructions '
-
4.4 of 5.0 with 44 Reviews
SALE PRICE: $223.80 12% OFF
Manufacturer: Greenlee
Brand: Greenlee
Model: CM-960
Manufacturer: Greenlee
Brand: Greenlee
Model: CM-960
Includes Clamp Meter (2) 1.5V AAA Batteries Test leads Carrying case Features Measures AC+DC current AC and AC+DC voltage measurements with digital low pass filter for accurate readings on variable frequency drives Also measures DC voltage, resistance, capacitance and frequency Tests continuity and diodes Peak-RMS measures motor inrush current Backlight increases accuracy on small wires and low current Two voltage detection modes - non-contact or using a single test lead Data hold Recording of Maximum, Minimum, and Average readings Lifetime warranty
-
4.4 of 5.0 with 507 Reviews
SALE PRICE: $224.99 11% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: C290
Manufacturer: Fluke Corporation
Brand: Fluke
Model: C290
Hard-Shell protective carrying case for use with 190 Series II ScopeMeters test tool.
-
4.4 of 5.0 with 496 Reviews
SALE PRICE: $228.97 24% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 4116762
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 4116762
Fluke softcase for 174X and 43X-II power quality analyzer.
-
4.4 of 5.0 with 38 Reviews
SALE PRICE: $234.29 1% OFF
Manufacturer: Fluke
Brand: Fluke
Model: R-FLUKE-374
Manufacturer: Fluke
Brand: Fluke
Model: R-FLUKE-374
The Fluke 374 True RMS clamp meter can read up to 600 V and 600 A in both AC and DC modes. Additionally, the Fluke 374 is compatible with the new iFlex flexible current probe (sold separately), which expands the measurement range to 2500A AC.
-
4.4 of 5.0 with 18 Reviews
SALE PRICE: $241.27 4% OFF
Manufacturer: Extech Instruments
Brand: Extech
Model: MA640-NIST
Manufacturer: Extech Instruments
Brand: Extech
Model: MA640-NIST
600A True RMS AC/DC Clamp Meter that features a built-in Non-Contact Voltage Detector. It provides measurement of AC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Temperature, Duty Cycle, Diode and Continuity. This product is NIST Certified which indicates that the product is traceable to standards provided by the National Institute of Standards and Technology (NIST).
-
4.4 of 5.0 with 49 Reviews
SALE PRICE: $242.99 6% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 617727
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 617727
|
The Fluke i410 current clamp is an accessory that extends the range of digital multimeters for measuring current in electrical testing applications. An attached 1.6m output cable connects the clamp to a compatible multimeter that can accept safety-shrouded banana plugs and display 1 milliVolt (mV). It has a clamp that measures AC and DC current to 400 amp. The clamp has two jaws that can close around an electrical conductor up to 30mm in diameter to measure current without touching or interrupting the circuit. It has a zero error adjustment to set the mulitmeter's display to zero for accurate DC readings. The unit operates on one 9V battery. It meets International Electrotechnical Commission (IEC) safety standards 61010-1 and is rated for CAT III installations to 600V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. The European Conformity (CE) marking indicates compliance with applicable European Union directives. The unit comes with a battery and instructions. Clamp meters are typically used by electrical engineers to measure properties of electrical current without physically touching or disconnecting the conductor.SpecificationsMaximum AC input400 ampMaximum DC input400 ampOutput level1mV per amp DC or ACBasic accuracy3.5% + 0.5 ampInstallation ratingCAT III, 600VStandards metIEC safety standard 61010, CE markingPower supply9VWeight0.5 kg/17.6 oz.Dimensions209 x 78 x 48mm/3.09 x 8.21 x 1.87 inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Clamp meters, also called clamp-on meters, measure electrical current without cutting through wires, or touching or interrupting the electrical circuit. Available in handheld or benchtop models, clamp meters diagnose problems in electrical equipment, wiring, and power supplies. A current clamp has two ...
-
4.4 of 5.0 with 41 Reviews
SALE PRICE: $249.99 1% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-CV201
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-CV201
The ClirVu coating - exclusive to Fluke infrared windows - seals the optic prior to assembly to protect against moisture degradation making it perfect for very hot and very cold environments.
-
4.4 of 5.0 with 10 Reviews
SALE PRICE: $262.84 9% OFF
Manufacturer: Milwaukee
Brand: Milwaukee
Model: 2237-20
Manufacturer: Milwaukee
Brand: Milwaukee
Model: 2237-20
|
CLAMP METER . The product is easy to use. The product is durable. The product is manufactured in Japan. Setting the standard for high-performance clamp meters, the Milwaukee 2237-20 Clamp Meter measures up to 600 amps AC and features a large, 1.3-inch jaw opening. Part of Milwaukee's Test & Measure line, this meter is ideal for professional residential and commercial electric, industrial, and service work, including testing electrical-panel and motor currents.2237-20 Clamp MeterJaw Size1.3"TRMSYesSafety RatingCAT III 600VCurrent AC600ACurrent DC600AVoltage AC600VVoltage DC600VFrequencyYesResistance6 kohmsContinuityAudibleCapacitance4000µFDisplay BacklightYesDisplay TypeWhite on Black LCDNon-contact VoltageYesSLED work lightYesRugged over-moldingYesBattery2 x AA Alkaline BatteryLength9.5"The thin jaw profile lets you easily measure wires in panels or bundles. View larger.True-RMS Clamp Meter with Thin Jaw Covers 95 Percent of TestingWith the 2237-20, you can use fewer tools, save money, and complete jobs more easily. Its thin jaw profile allows for easy wire measurement in panels or bundles, while its wide voltage range to 600 AC/DC helps improve overall performance.The 2237-20 handles 95 percent of general testing applications, excluding only the highest voltage and current ranges. Also, this heavy-duty True-RMS electrical current tester is rugged enough to handle tough jobsite, field, and plant conditions.Rated CAT III 600V for safety, the 2237-20 provides features that are specifically tailored to the professional, including frequency measurement, resistance measurement to six kohms, tests for continuity and capacitance, and rugged over-molding for durability and all-day comfort.The high-contrast display is clear and easy to read. View larger.In addition, this tool has a high-contrast, best-in-class, white-on-black display for easy reading, as well as a LED work light to enhance visibility in dark or enclosed spaces. Last but not least, embedded, non-contact voltage detection provides safety and a five-year ...
|
|