Current Testers - Page 100

Manufacturer: Johnson / Emerson Connectivity Solutions Brand: Johnson / Emerson Connectivity Solutions

Test Plugs & Test Jacks BINDING POST BLACK

Manufacturer: IDI Brand: IDGroup

Contact Probes HEADED 4 SIDED CHISE L

Manufacturer: Fluke Brand: Fluke Model: FLUKE 902 Color: Yellow/Red

Heating, ventilation, air conditioning (HVAC) technicians require a service tool that can consistently keep up with their demands. The Fluke expands the existing line of quality Fluke clamp meters by delivering the features necessary to diagnose and repair HVAC systems. Combined with true rms technology and a CAT III 600 V rating, the Fluke 902 helps technicians do their jobs safely and accurately.

Manufacturer: Yokogawa Electric Corporation Brand: Yokogawa Model: CL420

This device allows the user to make safe current checks of 4 to 20mA without breaking the loop. In addition, the output function provides a simple way to log and monitor the data.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-1587 T

The Fluke 1587 digital insulation multimeter (also known as a multitester) is a true RMS, auto- and manual-ranging meter insulation resistance, current, voltage, and resistance for testing line insulation in telecommunications applications. The insulation test voltage settings of 50V, 100V measure resistance from 0.01 to 100 megohms. The meter also measures capacitance, frequency, and resistance. Temperature is measured using a K-type thermocouple (included). A diode test detects correct functioning of a circuit's diodes. A low-pass filter provides accurate AC voltage and AC frequency measurements on inverters and variable-frequency motor drives by blocking unwanted voltages. Live circuit detection increases user safety by preventing insulation tests when voltages exceed 30V, and auto-discharge of capacitive voltage increases user protection. An audible continuity sensor confirms a circuit conducts electricity. The LCD is backlit for readability in low light. A Hold function freezes the reading on the display. An alarm sounds when the test leads are connected to the wrong jack for the measurement being taken. The unit automatically turns off after 20 minutes of nonuse to conserve battery life or can be disabled for extended readings, and a low-battery indicator signals when the meter's batteries need to be replaced. The meter included a set of detachable test leads, a remote probe, alligator clips, a hard case, and instructions. This true RMS (root mean square) meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has an undistorted waveform, or nonlinear loads, such as electronic devices or motors, where the current or voltage has a distorted waveform. When turned on, the meter is in auto-ranging mode and automatically selects the correct operating range for the property being measured. It can be switched to manual-ranging mode, which allows the operator to choose the appropriate operating range. The display has a 6,...

Manufacturer: Fluke Brand: Fluke Model: 4542286

The Fluke Series Battery Analyzer is ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications.

Manufacturer: Fluke Corporation Brand: Fluke Model: 715

The Fluke 715 Volt/mA Calibrator delivers outstanding performance, durability and reliability. The calibrator is compact, lightweight, and easy to carry. It is EMI tolerant, dust and splash resistant, and features a removable battery door for quick battery changes. Measure loop current (0-20 mA, 4-20 mA) signals with very high accuracy of 0.015-Percent and 1 mA resolution. Measure voltage output process signals from PLC’s transmitters. The 715 is designed to source or simulate a 24 mA loop current and source voltage to 100 mV or 10V. Features 24V loop supply with simultaneous current measurement, improved battery life, 250 ohm HART resistor with loop power, step and linear ramp output function and configurable zero and span settings. The calibrator’s enhanced voltage and current measure and source accuracy creates a highly functional tool. The 715 is compatible with the TPAK ToolPak magnetic hanging system (sold separately). Includes a protective yellow holster with test lead storage, instructions sheet (14 languages), single 9V alkaline battery, test leads and alligator clips, and NIST- traceable calibration report and data. Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.

Manufacturer: Fluke Corporation Brand: Fluke Model: 2452080

Fluke 726 precision multifunction process calibrator is designed specifically for the Process industry with broad workload coverage, calibration power and unsurpassed accuracy in mind. The 726 measures and sources almost all process parameters and can calibrate almost anything. The 726 will also interpret results without the help of a calculator and store measurement data for later analysis. Measure or source pressure using any of 29 Fluke 700Pxx pressure modules. Source mA with simultaneous pressure measurement to conduct valve and I/P tests. Integrated pressure switch test allows you to capture the set, reset and dead band of a switch. Memory storage for up to 8 calibration results, return stored calibration data from the field for later analysis. Transmitter error percent calculation, interpret calibration results without a calculator. Perform fast linearity tests with auto step and auto ramp features. Power transmitters during test using 24 V loop supply and simultaneous mA measurement. Store frequently-used test setups for later use. Frequency totalizer and frequency pulse train source mode for enhanced flowmeter testing. HART mode inserts 250 ohm resistor in mA measure and source for compatibility with HART instrumentation. Custom RTD curves, add calibration constants for certified RTD probes for enhanced temperature measurement. New voltage input protection design for improved reliability. 3000 m operating altitude. EN 61010-1:1993, ANSI/ISA S82.01-1994; CAN/CSA C22.2 No 1010.1:1992 approved. Runs on 4 AA alkaline batteries. Current DC: 24 mA 0.01 percent + 2 mA. Resistance: 0.0 to 4000 O +/- 0.015 percent. Storage temperature: -20 degrees C to +71 degrees C. 726 including: 1 set of AC72 alligator clips, 1 set of stackable test leads, 1 set of TL 75 test leads, user manuals and NIST- traceable calibration report and data.

Manufacturer: uxcell Brand: uxcell Model: a11022500ux0037

Description: Measures Voltage range of 0-30V with accuracy of Class 2.5. Monitor your systems quickly and accurately with this easy to read DC 0-30V volt meter. . For electronic applications, auto circuit or other Voltage measurement devices.

Manufacturer: YXCIOU Brand: YXCIOU

Measures range 0-300V AC voltage with accuracy of Class 2.5. Clear and easy to read scale and a button for fine tuning the dial.