Current Testers - Page 92

Manufacturer: Amprobe Brand: Amprobe Model: ACD-20SW

The Amprobe ACD-20SW clamp meter measures voltage, current, resistance, capacitance, continuity, and temperature in electrical wires and cables up to 1.18in. (30mm) in diameter. This average-sensing meter helps provide accurate readings when measuring linear loads with a current or voltage that has a sinusoidal waveform. The clamp head swivels 180 degrees so that the display can be turned for greater readability and the jaw is designed for single-handed operation. The non-contact voltage indicators detects voltage from 70 to 600V AC, works on any range, and indicates the presence of alternating current (AC) voltage with a red indicator light and audible beep. The tester measures AC and direct current (DC) voltage up to 600V, AC current up to 400A, resistance up to 40 megaohms, and continuity up to 400 ohms. The unit is both autoranging and manually ranging, for quick tests and greater accuracy, respectively. The diode test function features a 1.2mA test current. The 3-3/4 LCD has a maximum reading of 3,999 and has a hold function. The tester is powered by two AAA batteries and has an auto-off function that turns the unit off after 10 minutes of idle time. The ACD-20SW is designed for use on electrical wiring and HVAC systems by electricians and electrical contractors. Specifications Power supply AAA batteries (two, included) AC voltage range 0 to 600V DC voltage range 0 to 600V AC current range 0 to 400A Resistance range 0 to 40 megaohms Continuity range 0 to 400 ohms Weight (including batteries) 1.26lb./157g Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-01 Cat III 600V Dimensions 12 x 5.3 x 1.2 inches / 306 x 135 x 30mm (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handh...

Manufacturer: Hioki Brand: Hioki Model: 9669

Clamp on sensors for the power quality analyzer 3196 and clamp on power HiTester 3169. Sensors are designed with a safety barrier to protect the user from being in direct contact with live conductors. Completely meet all CE marking requirements. Rated input current 500 Amp AC, 5000 Amp AC. Rated output current 0.5 V AC. Accuracy (at 45/66 Hz) amplitude: +/-1.0 percent rdg. +/-0.01 f.s. Full scale (f.s.) is the 3196 range value. Phase: +/-1 or less. Frequency characteristics 66 Hz to 5 kHz (+/-1 percent or less from accuracy). Maximum allowable input continuous 1000 A rms (45 to 66 Hz). Maximum circuit voltage 600 V AC rms (insulated wire). Core jaw diameter: 2-5/32", 3-9/64" by +/-25/32" busbar. Measures 3-29/32 width by 7-25/64" height by 1-41/64" depth. 9-53/64' Cord length.

Manufacturer: Fluke Brand: Fluke Model: 4561297

Replacement Probe Tips for Fluke Battery Analyzers is for use with Fluke BT520 and BT521 Battery Analyzers Intelligent Probes.

Manufacturer: Amprobe Brand: Amprobe Model: ACD-22SW

The Amprobe ACD-22SW digital clamp meter with swivel clamp and non-contact voltage detector is a true RMS (root mean square) sensing, auto- or manual-ranging multimeter for measuring current, voltage, and resistance in electrical testing and heating, ventilation, and air conditioning (HVAC) applications. It has a transformer clamp that measures alternating current (AC) to 400 amp. The meter comes with detachable test leads that measure direct current (DC) voltage and AC voltage to 600 volts (V) and resistance to 40 megaohms. The clamp has two jaws that can close around a conductor up to 1.18" (30 mm) in diameter to measure current or frequency without touching or interrupting the circuit. It swivels 180 degrees to allow the liquid crystal display (LCD) to be seen when taking readings in hard-to-reach areas. The meter's non-contact voltage detector senses AC voltage without making contact with the circuit. An audible continuity sensor confirms that the circuit conducts electricity, and a diode test detects whether a circuit’s diodes are working properly. The hold function keeps the reading on the display, even after the meter is disconnected. The meter's backlit liquid crystal display (LCD) is visible in low light. The unit automatically turns off after 10 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A finger guard on the body of the meter helps protect fingers from shock.This true RMS (root mean square) sensing meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform, or non-linear loads, such as electronic devices or motors, where the current or voltage has a sinusoidal non-sinusoidal waveform. Two ranging modes (auto or manual) offer a range of operator control when taking readings. When turned on, the meter will be in auto-ranging mode and will automatically select the correct operating range for the pro...

Manufacturer: Fluke Corporation Brand: Fluke Model: FLK-CNX C3003

The CNX C3003 Modular 3-Compartment Soft Case is as versatile as the CNX wireless test tool team. This carrying case contains three adjustable compartments, suitable for the CNX Wireless Multimeter or any of the CNX remote measurement modules. An inner pocket holds test leads and other accessories.

Manufacturer: Amprobe Brand: Amprobe Model: ACD-21SW Color: Multicolored

The Amprobe ACD-21SW digital clamp meter with swivel clamp, non-contact voltage detector, and included temperature probe is an average-sensing, auto- or manual-ranging multimeter for measuring current, voltage, capacitance, resistance, and temperature in electrical testing and heating, ventilation, and air conditioning (HVAC) applications. It has a transformer clamp that measures alternating current (AC) to 400 amp. The meter comes with detachable test leads that measure direct current (DC) voltage and AC voltage to 600 volts (V), capacitance to 4 millifarads, and resistance to 40 megaohms. The clamp has two jaws that can close around a conductor up to 1.18" (30 mm) in diameter to measure current or frequency without touching or interrupting the circuit. It swivels 180 degrees to allow the liquid crystal display (LCD) to be seen when taking readings in hard-to-reach areas. The meter's non-contact voltage detector senses AC voltage without making contact with the circuit. The meter comes with a K-type thermocouple probe for measuring temperature. The hold function keeps the reading on the display, even after the meter is disconnected. The unit automatically turns off after 10 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A finger guard on the body of the meter helps protect fingers from shock.This average sensing, or average responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. Two ranging modes (auto or manual) offer a range of operator control when taking readings. When turned on, the meter will be in auto-ranging mode and will automatically select the correct operating range for the property being measured. It can be switched to manual-ranging mode, which requires that the operator choose the appropriate operating range. The meter has a 4,000-count resolution, meaning that it can display up to 3,9...

Manufacturer: Mueller Electric Brand: Mueller Electric

Test Plugs & Test Jacks Black Stackable Sing

Manufacturer: Amprobe Brand: Amprobe Model: AM-570

AM-570 Industrial MultimeterView larger Built for real-world industrial applicationsView larger Industrial Quality Multimeter The Amprobe AM-570 is the best multimeter in its class designed for professional electricians and HVAC technicians who need to maintain, service or troubleshoot advanced electrical systems in the most demanding environments. Packed full of features such as True RMS, dual thermocouples for taking differential temperature measurements, a low impedance function to detect stray voltage, and a low pass filter to accurately take measurements on variable frequency drives, the Amprobe AM-570 Digital Multimeter allows for quick go/no-go checks without the need for an additional tool. Packed With High-End Features The Amprobe AM-570 Industrial Digital Multimeter with True RMS is a digital multimeter (also known as a multitester) that measures AC/DC voltage to 1,000V, AC/DC current to 10A, frequency to 60 MHz, resistance to 60 megaohms, capacitance to 60 millifarads, and temperature from -40 to +1832 degrees F (-40 to +1000 degrees C). It also performs audible continuity tests and diode tests. This true RMS (root mean square) meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has an undistorted waveform, or nonlinear loads, such as electronic devices or motors, where the current or voltage has a distorted waveform. Dual thermocouples allow for differential temperature measurements and a low-pass filter allows users to read voltage and frequency on variable frequency drives. Built-in safety features include the low impedance mode and non-contact voltage detection, which verify the presence of voltage and stray voltage. This meter is manual- and auto-ranging for user flexibility and a duty cycle indicates the percentage of time a signal is above or below the trigger level during one cycle. The meter has a data hold and a peak hold for specialized signal measurements as well as Max/min memory and a rela...

Manufacturer: Hioki Brand: Hioki Model: 3280-10

Measure the fundamental waveform component using the average rectified method. Wide range of maximum 1000A, drop proof design withstands dropping from a height of 1 meter. Clamp on Hi-Tester is 1000A, clamp aperture: 1-19/64" diameter. Light 100g, and slim 5/8". Independent-opening double-lever design. Slim body design, allows easy clamping even for narrow conductors. No metal (iron core) exposure, ensuring enhanced safety. AC Current range 42.00 to 1000A AC, 3 ranges (+/-1.5 percent rdg. +/-5 dgt. at 50 or 60Hz), Average rectifier effective value. AC Voltage range 4.200 to 600V AC, 4 ranges (+/-2.3 percent rdg. +/-8 dgt. at 50 or 60Hz), Average rectifier effective value. DC Voltage range 420.0mV to 600V DC, 5 ranges (+/-1.3 percent rdg. +/-4 dgt.). Other functions Resistance: 420.0 to 42.00 M-ohm, 6 ranges, Accuracy: +/-2.0 percent rdg. +/-4 dgt. (at 420 to 420 k-ohm range). Continuity: 420.0 ohm (Buzzer sounds at approx. 50 ohm or less). Analog output None. Frequency characteristics (at AC current / voltage) AC current: 50/60 Hz, AC voltage: 50 to 500 Hz. Display section Digital / LCD, maximum 4199 dgt. Sampling rate 2.5 times/sec or 1 times/3 sec. Maximum circuit voltage 600V AC rms (insulated wire). Power supply: Coin type lithium battery (CR2032) x 1, Continuous use 150 hours. Core jaw diameter 33 mm. Accessories test lead 9208 (1). Carrying Case 9398 (1). 3 Years warranty. Measures 2-15/64" width by 6-113/128" height by 5/8" depth.

Manufacturer: Holley Brand: Holley Model: 553-126

Mechanical Voltage Gauge.