Oscilloscopes & Accessories - Page 42

Manufacturer: Fluke Corporation Brand: Fluke Model: 4357406

The Fluke Flexible Current Probe is a 12" current probe that measures AC to 1,500 amp. This current probe is for use with the Fluke 1730 Three-Phase Energy Logger (sold separately) for conducting energy usage surveys. It measures AC to 1,500 amp to extend the range of the energy logger. The flexible probe is 12" long for coiling around a cable under test. The probe connects to the energy logger vial a 6' cord. It meets International Electrotechnical Commission (IEC) safety standard 61010-1, and is rated for CAT IV installations to 600V and CAT III installations to 1,000V. It comes in a set of three.SpecificationsRange1 to 150 amp AC / 10 to 1,500 amp ACAccuracy (with the 1730 Energy Logger)+ or - (1% of reading + 0.02% of range)Coil length12"Cable length2m/6.6'Installation ratingCAT IV, 600V; CAT III 1,000VStandards metEN safety standard 61010, CE marking, Canadian Standards Association, Australian EMCIngress protectionIP50Weight115gIndustrial power meters measure electrical properties such as voltage, current, power, and energy to monitor the efficiency and performance of a power system. They are used for designing, installing, and maintaining industrial, commercial, and residential power supply systems. More advanced models have features for comparing and recording multiple measurements taken at different times and in different areas.Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

Manufacturer: Gossen Metrawatt Brand: GOSSEN METRAWATT

Memory Adapter for SECUTEST... and SECULIFE ST This memory adapter is intended for use with SECUTEST.../ SECULIFE ST  test instruments. Test reports and individual test steps and/or test series can be written ("printed") directly from the SECUTEST... test instrument to the memory adapter, and can be subsequently read out and processed at a PC. This memory adapter is thus especially well suited for archiving and transmitting test reports. Depending upon their scope, up to 1,000 test reports or test series can be saved to memory. Applications This memory adapter is intended for use with SECUTEST... test instruments. Test reports and individual test steps and/or test series can be written ("printed") directly from the SECUTEST... test instrument to the memory adapter, and can be subsequently read out and processed at a PC. This memory adapter is thus especially well suited for archiving and transmitting test reports. Depending upon their scope, up to 1,000 test reports or test series can be saved to memory. Please note that the direct print-out option must be enabled in order to save individual test steps or test series to your SECUTEST...

Manufacturer: REK Brand: REK Model: MOS620CH

Vertical Axis Sensitivity: 5mV~5V/DIV, 10 steps in 1-2-5 sequence Vernier Vertical Sensitivity:To 1/2.5 or less of panel-indicated value. Frequency bandwidth: DC~20MHz & DC~40MHz AC coupling:Low limit frequency 10Hz. Rise time:Approx. 17.5nS for 20MHz Approx. 8.75nS for 40MHz Input impedance: Approx. 1M ohm//Approx.25pF DC balance shift: Adjustable on panel Linearity: ≤ ±0.1 DIV of amplitude change when waveform of 2 DIV at graticule center is moved vertically. Vertical modes:CH1:CH1 single channel.CH2: CH2 single channel. DUAL:CH1 and CH2 are displayed. ALT or CHOP selectable at any sweep rate. ADD:CH1+CH2 algebraic addition. Chopping repetition frequency:Approx. 250KHz Input coupling:AC, GND, DC Maximum input voltage:400V (DC+AC peak), AC: frequency 1KHz or lower. When set probe switch at 1:1, the maximum effective readout is 40V pp Or set prove switch at 10:1, the maximum effective readout is 400 V pp Common mode rejection ratio: 50:1 better at 50KHz sinusoidal wave. Isolation between channels: (At 5m V/DIV range) >1000:1 at 50 KHz >30:1 at 15 KHz >30:1 at 35 KHz CH2 INV BAL:Balanced point variation: ¡Ü1 DIV (Reference at center graticule) Triggering Source CH1, CH2, LINE, EXT(CH1and CH2 can be selected only when the vertical mode is DUAL or ADD). In ALT mode, if the TRIG.ALT switch is pushed in, it can be used for alternate triggering of two different sources. Coupling:AC: 20Hz to full bandwidth Slope:+/- Sensitivity:20Hz~2MHz: 0.5DIV, TRIG-ALT:2 DIV,EXT:200mV 2-20MHz:1.5DIV TRIG-ALT:3 DIV, EXT:800mV TV:Sync Pulse more than1 DIV(EXT:1V) Triggering Modes AUTO: Sweeps run in the free mode when no triggering input signal is applied. TV-V: This setting is used when observing the entire vertical picture of television signal. TV-H: This setting id used when observing the entire horizontal picture of television signal. EXT triggering signal input Input impedance Max. Input Voltage Approx: 1M ohm//Approx. 25 pF 400V AC: Frequency not higher than 1KHz.

Manufacturer: Owon Brand: OWON Model: SDS5032E

The Owon SDS5032E is a 30 MHz, two-channel digital oscilloscope with a maximum real-time sample rate of 125 MS/s per channel (250 MS/s interleaved), a record length of 10 kpts per channel, advanced triggering, four math functions and FFT, 20 automatic measurements, auto-scale function, pass/fail testing, and USB connectivity for electronics applications such as product design and debugging, repair and servicing, and electrical engineering education, among others. The sample rate and record length enable long capture times for processing and displaying detailed waveforms. An external channel can trigger from a third source while acquiring data from channels 1 and 2. Edge, pulse width, slope, and video triggers allow isolation of specific signals, an alternate trigger allows simultaneous observation of two unrelated signals, and a trigger hold-off function stabilizes triggering on complex waveforms. The oscilloscope's math functions—add, subtract, multiply, and divide—plus FFT (fast Fourier transform) and automatic measurements such as period, frequency, and peak-to-peak enable an in-depth analysis of waveforms. An auto-scale function selects the optimal settings for displaying a waveform, and can be disabled for educational exercises. Pass/fail mask testing determines whether a signal falls within the user-programmed settings. Up to 15 waveforms can be stored in the internal memory. Additional specifications include a rise time of 11 ns and various triggering features. The oscilloscope has an 8" color TFT (thin film transistor) LCD with a resolution of 800 x 600 pixels for viewing waveforms.The oscilloscope has a USB host port for storing data on a flash drive (sold separately), USB device and LAN ports for connecting to a PC, and includes Microsoft Windows compatible software for transmitting data and remote operation. The unit has European Conformity (CE) marking. It comes with two passive voltage probes; CD-ROM PC software; a USB interface cable; a power cord for 100 to 240VAC, 50/60Hz, CAT II pow...

Manufacturer: Fluke Brand: Fluke Model: 4636915

The new Fluke PRV240 Proving Unit is an easy-to-use, easy-to-sell product that will be in demand by environmental health and safety managers, plant safety officers, facilities managers and other managers concerned with electrical safety and compliance.

Manufacturer: Pico Brand: Pico

.da-1-4 { width: 23%; } .da-img { max-width: 100%; height: auto; margin: auto; } .da-ProdBody{ padding: 2%; margin: 0 auto; } .cr-list { list-style-image: url(/assets/1/7/850c3d3a3b4b40e68a2a2327508d61531.png); } .da-sm-img{ box-shadow: 1px 2px 3px #eeeeee; border-radius: 5px; } .da-sm-img:hover{ box-shadow: 1px 1px 2px 1px #aaa; transition: all 0.5s ease-in-out; } .da-overlay { position: fixed; top: 0; bottom: 0; left: 0; right: 0; background: rgba(0, 0, 0, 0.7); transition: opacity 50ms; visibility: hidden; opacity: 0; z-index: 1000; } .da-overlay:target { visibility: visible; opacity: 1; } .da-popup-img { margin: 70px auto; padding: 20px; background: #fff; border-radius: 5px; width: 50%; position: relative; transition: all 0.5s ease-in-out; max-width: 800px; } .da-popup-img h2 { margin-top: 0; color: #333; font-size:14px; } .da-popup-img .da-close { position: absolute; top: 0px; right: 10px; transition: none; font-size: 30px; font-weight: bold; text-decoration: none; color: #333; } .da-popup-img .da-close:hover { color: #888888; } .da-popup-img .da-content { max-height: 30%; overflow: auto; }

Manufacturer: Gossen Metrawatt Brand: GOSSEN METRAWATT

Kelvin probes are used for connecting low impedance resistors (e.g. contact resistors, shunts etc.) to an ohmmeter with 4-wire connection. This allows for compensation of cable resistance. KC27 consists of 2 probes with stainless steel tips

Manufacturer: Gossen Metrawatt Brand: GOSSEN METRAWATT

Aluminum case for testers and accessories, dimension Hx W x D 390 x 590 x 230mm.

Manufacturer: TENMA Brand: Tenma Model: 72-10165-TENMA

Bandwidth: 100MHz. Bandwidth: 100MHz. Input Impedance: 1Mohm. Input Impedance: 1Mohm. Meter Display Type: -. Meter Display Type: -. Plug Type: -. Plug Type: -. Rise Time: 3. 5ns. Rise Time: 3. 5ns. SVHC: To Be Advised. Sampling Rate: 250MSPS. Sampling Rate: 250MSPS. Scope Channels: 2 Analogue. Scope Channels: 2 Analogue. Scope Type: PC Based. Scope Type: PC Based. Series: -. Series: (Not Ava

Manufacturer: Rigol Brand: Rigol Model: DS1054Z Color: Grey

Rigol DS1054Z       Best Selling Oscilloscope Find out with the DS1054Z is one of the top selling oscilloscopes in the WORLD since its release in September 2014. Read the reviews! Let our customers tell you what they think of this unit. Schools love them, companies love them, students and home hobbyist love the DS1054Z. Backed by a 30 day money back guarantee you cannot go wrong with this unit. DS1054Z Features 50 MHz Analog Bandwidth Total of 4 Analog Channels Maximum Waveform Capture Rate of up to 30,000 wfms/s Includes 4 RP2200 150 MHz Passive HighZ Probes Low noise floor USB Host for Thumb Drive Large 7" Display 12 Mpts of Memory - upgradeable to 24     Customer Feedback "I have used the scope for basic measurements so far, mostly audio signals and comparisons of such signals. It works well and the construction is as good as that of expensive top-brand items. The packaging was adequate and protects the instrument well. RIGOL has tried hard to pass themselves as a decent company to buy equipment from and they have succeeded, at least with this scope. I have used lots of lab equipment for many years in college labs and this would fit perfectly in every lab, given its low price, specifications and support. Highly recommended for tight budgets and high expectations" Customer Submitted Image UltraVision Rigol's innovative UltraVision technology provides a deeper memory depth of 12Mpts standard and is upgradeable to 24 Mpts (with purchase of MEM-DS1000Z). The DS1054z also provides the ability to quickly focus in on certain piece of a recorded waveform. UltraVision × Full Visibility × Full Visibility The large 7" display of the DS1054z, with a resolution of 800 X 480 pixels makes it possible to view all channels on a single screen. This makes for better usability and more efficient analysis