Oscilloscopes & Accessories - Page 43

Manufacturer: GW Instek Brand: GW Instek Model: GOS-620

The Instek GOS-620 is a 20 MHz, two-channel analog oscilloscope with ALT triggering, Z-axis input, TV synchronization capability, and channel 1 output for electronics applications such as product design, assembly lines, repair and servicing, and electrical engineering education, among others. This oscilloscope has a vertical sensitivity to 1mV per division for capturing low-level signals. An ALT triggering function displays the signal from both channels simultaneously and a Z-axis input modulates the intensity of the waveform. The TV synchronization circuit allows triggering of TV-V and TV-H signals and the channel 1 output can apply a signal to an external device, such as a frequency counter (sold separately). Sweep speed can be magnified by 10 to increase the number of sweeps shown on the display. Additional specifications include a rise time of 17.5 ns (50 ns at 5X magnification) and various triggering features. The oscilloscope has a 6" CRT (cathode ray tube) display with an internal 8 x 10 division grid (each division is 1 cm) for viewing waveforms. It has European Conformity (CE) marking. It comes with two 20 MHz passive voltage probes; a power cord for 115/230VAC, 50/60 Hz; and instructions. SpecificationsDisplay6" CRT (cathode ray tube)Bandwidth20 MHzChannelsTwoSweep speed0.2 μs to 0.5 s per division; 100 ns to 50 ms per division (at 10X magnification)Power source115/230VAC, 50/60 HzDimensions (H x W x D)150 x 310 x 455 mmWeight8 kgH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Oscilloscopes are electrical testing devices used to verify the functionality of equipment that generates an electrical signal. Oscilloscopes measure the voltage of an electrical signal over time, and display the measurement as a waveform in a visual graph. The waveform shows the sweeps (or refresh) of voltage on a vertical (Y) axis, and the time on a horizontal (X) axis. Details of a waveform dem...

Manufacturer: Hioki Brand: Hioki Model: FT6031-03

Earthing or grounding of electrical equipment is essential to maintain safety, protecting lives, as well as prevent damage to equipment. The FT6031-03 is a IP67 dustproof and waterproof two- or three-pole earth resistance tester with large, easy-to-read display, highly sensitive earthing rods, and innovative cable winder that significantly reduces the amount of time needed to complete earth resistance tests.

Manufacturer: Rigol Brand: Rigol Model: DS1102E Color: White

This Rigol DS1102E Model is economical digital oscilloscope with high-performance, which is designed with dual channels and 1 external trigger channel. It provides 20 types of wave parameters for automatically measuring, which contains 10 Voltage and 10 Time parameters. In cursor mode, users can easily measure by moving cursor. Besides, 3 types of cursor measurement are optional: Manual, Track and Auto. This DS1102E DSO provides powerful PC application software: UltraScope, which enables to: Capture and measure wave; Perform local or remote operation; Save waves as ".bmp" format; Save files as ".txt" or ".xls" format; Print waveforms.

Manufacturer: LeCroy Corporation Brand: LeCroy Model: WSXS-SPIBUS TD

Advanced software algorithms deconstruct the waveform into protocol information, then overlay the decoded data on the waveform. Decode information condenses or expands depending on the timebase/zoom ratio setting, so understanding messages is easy. Various sections of the protocol are color-coded to make it easy to understand, especially for users new to SPI serial data. The decode operation is fast-even with long acquisitions. The user can choose to decode into hex, binary, or ASCII formats. Completely isolate specific SPI message events for better understanding and debug. Use a conditional DATA trigger to select a range of DATA values to trigger on, not just a single DATA value. Oftentimes, I2C utilizes DATA bytes to specify sub-addresses for accessing memory locations in EEPROMs. Conditional DATA trigger allows triggering on a range of DATA bytes that correspond to reads or writes to specific sub-address memory blocks in the EEPROM. Of course, all the basic SPI triggering capability you would expect is also included. The SPI trigger can be configured for a range of CPOL and CPHA settings as well as the Simplified SPI protocol. Turn your oscilloscope into a protocol analyzer with the Table display of protocol information. Custom configure the Table to display only the information you want, and export Table data to an Excel file. Touch a message in the table and automatically zoom for detail. In all cases, the Table never obscures your waveform data. SPI messages can be quickly located by searching on DATA. Pressing an arrow button advances the single zoomed message view one message to the right or left of the current message. Compatible with TD (Trigger and Decode) Option compatible with all WaveMaster 8 Zi/Zi-A, WavePro 7 Zi/Zi-A, WaveRunner 6 Zi, WaveRunner Xi and WaveSurfer Xs. D (Decode) Option fully compatible with WaveRunner 6000, WavePro 7000, and WaveMaster 8000 Series.

Manufacturer: Hantek Brand: Hantek HDG2022B

Specifications: 1.Main Features •Model:HDG2022B •Channel:2 •Waveform Length:64M •Bandwidth:20MHz •Frequency:1μHz-20MHz •Sample Rate:250MSa/s •Voltage Resolution:16Bit •Digital Output Mode:16 Channels 2.Frequency Characteristics •Waveform:Sine,Square,Ramp,Pulse,Noise,Sinc,Exponential Fall,ECG,Gauss,Haver Sine, Lorentz,Dual-Tone,DC •Sine:1μHz-20MHz •Square: 1μHz-20MHz •Pulse: 1μHz-20MHz •Ramp: 1μHz-2MHz •White Noise:20Mhz •Harmonic/Arbitray: 1μHz-20MHz •Resolution: 1μHz •Accuracy:±2ppm,18℃-28℃ 3.Square •Rise/Fall time(Typical):＜16ns •Overshoot:Typical Value(100KHz,1Vpp)＜3% •Duty Cycel:≤10MHz:20.0%-80.0%;10MHz-40MHz:40.0%-60.0%;＞40MH:50.0%(fixed) •Non-symmetry:1% of period+5ns 4.Ramp •Linearity:≤1%(Typical,1kHz,1VPP,Symmetry 100%) •Symmetry:0%-100% 5.Pulse •Period:200ns-1millons •Pulse:≥16ns •Leading/Trailing Edge Time: 11ns •Overshoot:Typical (1Vpp)＜3% 6.Amplitude Characteristic •Amplitude Range:≤20MHz:1mVpp-20Vpp; ≤60MHz:1mVpp-15Vpp; ≤80MHz:1mVpp-10Vpp ;≤90MHz:1mVpp-5Vpp; ≤10MHz:1mVpp-2Vpp •Resolution:1mv or 4 digits •Isolation:＜-80dB •Impedance:50Ω(Typical) 7.Modulation Characteristic: Support AM,FM,PM,ASK,FSK,PSK and PWM modulations 8.Burst Characteristic •Burst Count:200000000 •Gated Source:External Trigger •Trigger Source:Internal External or Manual 9.Sweep Characteristic •Direction:Up •Type:Linear •Sweep/Hold/Return Time:280000s

Manufacturer: Keysight Technologies Brand: KEYSIGHT TECHNOLOGIES Model: N2876A

The N2876A passive probe offers DC to 1.5 GHz and 100:1 attenuation factor to measure fast edges in high speed applications more accurately. This probe needs 50 ? input on the oscilloscope. Compact 2.5-mm probe head diameter, low input capacitance, and various fine-pitch probe tip accessories make the Keysight N2870A Series passive probes ideal for probing densely populated IC components or surface-mount devices used in today's high-speed digital applications. The sharp probe tip is spring loaded to help engineers keep the probe from slipping off the device under test. Insulating IC caps keep the small probe tip centered on the IC lead and keep it from shorting adjacent leads. Standard flat blade ground connector and self-adhesive copper ground pad help reduce ground inductance while offering easy ground access. Optional probe tip accessories provide specialized capabilities for demanding applications. Compatible with Keysight InfiniiVision and Infiniium Series oscilloscopes with 50 ? input. Recommended for measuring 50 ? transmission line or signals with low source impedance (

Manufacturer: withUtrade Brand: Hantek DSO3062AL

Features Five-in-one PC Based Laboratories: Oscilloscope/Arbitrary Waveform Generator/Logic Analyzer/Spectrum Analysis/Frequency Counter Oscilloscope: 2 Channel and EXT trigger, 60MHz Bandwidth. 200MSa/s real-time sampling rate, 10k-16M memory depth per channel. Arbitrary Waveform Generator: 25MHz arbitrary waveform output, (sine wave can deliver up to 75MHz) 200MSa/s DDS, 12bits of vertical resolution. Frequency Counter, FFT spectrum analysis. 8--36V Wide range of input voltage, suitable for vehicle power test. USB 2.0 interface, LAN optional. More than 20 kinds of automatic measurement function, PASS/FAIL Check function, is suitable for engineering application. Excellent industrial design, similar interface with bench oscilloscope, easy to use. Software support: Windows NT, Windows 2000, Windows XP, VISTA, Win 7, Win 8. Supply DEMO code (VC, VB, LABVIEW) and technical support.

Manufacturer: Cal Test Electronics Brand: Cal Test Electronics Model: CT4026

The Elditest CT4026 is an 18 kV high voltage divider probe for use with both digital and analog oscilloscopes.

Manufacturer: GW Instek Brand: GW Instek Model: GOS-630FC

The Instek GOS-630FC is a 30MHz, two-channel analog oscilloscope and frequency counter with an timebase auto-range function, ALT triggering, XY mode, Z-axis input, TV synchronization capability, and channel 1 output for electronics applications such as product design, assembly lines, repair and servicing, and electrical engineering education, among others. A built-in real-time frequency counter measures frequency from 50Hz to 30MHz, displaying readings on a five-digit LCD. The timebase auto-range function automatically selects the optimum sweep time for displaying waveforms. This oscilloscope has a vertical sensitivity to 1mV per division for capturing low-level signals. An ALT triggering function displays the signal from both channels simultaneously, and the XY mode compares the signal amplitude from each channel for determining the phase difference. The Z-axis input modulates the intensity of the waveform, the TV synchronization circuit allows triggering of TV-V and TV-H signals, and the channel 1 output can apply a signal to an external device. Additional specifications include a rise time of 11.7ns (50ns at 1 to 2mV per division) and various triggering features. The oscilloscope has a 6" CRT (cathode ray tube) display with an internal 8 x 10 division grid (each division is 1 cm) for viewing waveforms and an LCD that simultaneously shows readings for frequency, voltage per division, times per division, and XY mode. The LCD has a backlight for visibility in low light. The oscilloscope meets European Standard (EN) 61010-1:2001 safety standard and is rated for CAT (category) II installations to 300V, which covers energy-consuming equipment connected to a fixed installation, including household, office, and laboratory appliances. It has European Conformity (CE) marking. It comes with two 60MHz passive voltage probes, a power cord for 115/230VAC, 50/60Hz, and a user manual. SpecificationsDisplay6" CRT and LCDBandwidth30MHzFrequency measurement range50Hz to 30MHzChannelsTwoInstallation ratingCAT II, 300VStandards me...

Manufacturer: Hioki Brand: Hioki Model: LR8520

Data Logger Quantifies Likelihood of Fungal Growth Nagano, Japan Hioki is pleased to announce the launch of the Wireless Fungal Logger LR8520 Hygiene management geared to prevent fungal growth is an important priority from the standpoint of implementing quality control at food warehouses and protecting cultural properties at facilities such as art museums. The LR8520 Wireless Fungal Logger measures the fungal index, an indicator that is used to forecast the amount of time until fungal growth begins. Since the new instrument incorporates Bluetooth® wireless communications technology, it can be used to efficiently gauge the fungal index wirelessly, helping to prevent damage caused by fungal growth. Development Background Hygiene management is critical in preventing fungal growth in order to maintain quality in the warehousing industry, where companies store food and documents, and in order to protect cultural properties at facilities such as art and other museums. Typical regimes involve measuring temperature and humidity at regular intervals in order to prevent fungal growth. However, it is difficult to accurately assess the state of fungal growth on the basis of temperature and humidity measurement alone. Hioki focused on the fungal index, an indicator used to forecast how long until fungal growth begins, and developed the new LR8520 so that facilities managers can prevent damage from fungal growth by identifying the fungal index. Fungal Index The fungal index was developed by doctor of agriculture Keiko Abe, director of the Institute of Environmental Biology, as an indicator for forecasting the likelihood of fungal growth. There is a correlation between fungal growth, temperature, and relative humidity, and the fungal index can be calculated from the latter two data. Its principal use is to quantify the indoor fungal growth environment (patent: 2710903). Key Features 1