|
|
-
4.6 of 5.0 with 18 Reviews
SALE PRICE: $454.00 1% OFF
Manufacturer: Rigol
Brand: Rigol
Model: MC3132
Manufacturer: Rigol
Brand: Rigol
Model: MC3132
|
Rigol MC3132 MUX32 Module 32-channel Multiplexer. 32 channel differential Multiplexer module for use with M300 DAQ System Mainframe and MC3065 DMM module. Configurable for 2 or 4 wire measurements. The M3TB32 is the mating terminal block for this module. MC3132 (32-Channel Multiplexer)??Ü All 32 channels switch both HI and LO inputs, thus providing fully isolated inputs to the DMM module. MC3132 is divided into two banks (called A and B) of 16 two-wire channels each. When making 4-wire resistance measurement, the instrument automatically pairs channels of A bank and B bank. All channels are break-before-make. You can close multiple channels on this module only if you have not configured any channel to be part of the scan list. This module can be connected with MC3065 (DMM Module, if MC3065 is currently inserted). Measurement Connections Using External Terminal Blocks M300 provides 6 kinds of terminal blocks to easily connect the signal to be measured to the module. The models of the terminal blocks and corresponding modules are listed in the table below. This section introduces how to use the external block.  Terminal Block Module 1 M3TB32 MC3132, MC3232 2 M3TB64 MC3164, MC3264 3 M3TB24 MC3324 4 M3TB48 MC3648 5 M3TB16 MC3416 6 M3TB34 MC3534 Note: for the MC3724, the signal can be connected to the SMB connectors on the module directly. No terminal block is needed.  WARNING: Cut off all the power supplies before opening the terminal block or removing the terminal block from the module. 1. Place the terminal block with the front (with the RIGOL caption) facing downward and pull the two latches in the arrow direction in the figure below and press them down. Place the terminal block with the front facing upward and pull the upper cover of the terminal block upward and remove it
-
4.6 of 5.0 with 14 Reviews
SALE PRICE: $471.20 1% OFF
Manufacturer: Tektronix, Inc.
Brand: Tektronix
Manufacturer: Tektronix, Inc.
Brand: Tektronix
TPSBAT Battery Pack Shown with TPSCHG Charger
-
4.6 of 5.0 with 23 Reviews
SALE PRICE: $478.00 1% OFF
Manufacturer: Hioki
Brand: Hioki
Manufacturer: Hioki
Brand: Hioki
Soft Carrying Case
-
4.6 of 5.0 with 56 Reviews
SALE PRICE: $478.82
Manufacturer: Siglent Technologies
Brand: Siglent
Model: SDS1102CML-AMZN
Manufacturer: Siglent Technologies
Brand: Siglent
Model: SDS1102CML-AMZN
|
The Siglent SDS1102CML is a 100MHz, two-channel, digital storage oscilloscope with a 1GS/s sample rate, a 1Mpts per channel record length, and advanced triggers for electronics applications such as product design, assembly lines, repair and servicing, and electrical engineering education, among others. It has Edge, Pulse, Video, Slope, and Alternative triggers and its math functions include FFT (fast fourier transform). Additional specifications include a rise time of 3.5ns and vertical sensitivity to 2mV per division for capturing low-level signals. Operating menus and help display in Simplified Chinese, Traditional Chinese, English, Arabic, French, German, Russian, Portuguese, Spanish, Japanese, Korean, and Italian languages. The oscilloscope has RS232 and USB ports for communication, and a 7" color TFT-LCD (480 x 234 pixels) with an internal 8 x 18 division grid for viewing waveforms.SpecificationsBandwidth100MHzChannelsTwoDisplay7" color TFT-LCDPower100 to 240V, 50WWeight2.5kgDimensions (H x W x D)157 x 323 x 136 mmH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Oscilloscopes are electrical testing devices used to verify the functionality of an electrical signal generator. Oscilloscopes measure an electrical signal over time, and display the waveform signals in a visual graph. The waveform shows the sweeps (or refresh) of voltage on a vertical (Y) axis, and can display time on a horizontal (X) axis. Details of a waveshape demonstrate the signal over time. Oscilloscopes can display in a digital or analog view. An analog oscilloscope has continuous waveform display, typically in a luminous phosphor. Some oscilloscopes can display more than one channel and type of measurement simultaneously. Some oscilloscopes can capture waveform signals to memory, and recall them. Oscilloscopes may provide real-time intensity grading. Some oscilloscopes have the ability to adjust frequency of disp...
-
4.6 of 5.0 with 47 Reviews
SALE PRICE: $480.00 1% OFF
Manufacturer: Hantek
Brand: Hantek DSO
Manufacturer: Hantek
Brand: Hantek DSO
|
Specifications: â—Model:DSO1060 â—Bandwidth:60MHz â—Channel:2 â—Real-Sample Rate:250MSa/s â—Equivalent Sample Rate:50GSa/s â—Record Length:32K â—Rish time:≤5.8ns â—Timebase Accuracy:±50ppm â—Time Base Range:5ns/div-1000s/div â—Video Help:NO â—SD Card:NO â—Input Impandance:1MΩ ΙΙ 15pF â—VOLTS/DIV Range:10mV/div~5V/div â—A/D Converter:8bit â—Position Range:±50V(5V/div), ±40V(2V/div~500mV/div), ±2V(200mV/div~50mV/div), ±400mV(20mV/div~2mV/div) â—DC Gain Accuracy: ±3% for Normal or Average acquisition mode, 5V/div to 10mV/div; ±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div â—Bandwidth Limit:20MHz â—Trigger Types:Edge, Video, Pulse, Alternative â—Trigger Source:CH1, CH2 â—Math:+,-,x,÷,FFT, Invert â—Cursor Measurement: Voltage difference between cursors: â–³V; Time difference between cursors: â–³T; Reciprocal of â–³T in Hertz (1/ΔT); â—Auto Measuerment:Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot â—DMM Max. Resolution:6,000 Counts â—Testing Modes:Voltage, Current, Resistance, Capacitance, Diode & Continuity â—Max. Input Voltage:AC: 600V, DC: 800V â—Max. Input Current:AC:10A , DC: 10A â—Max. Input Impandance:10MΩ â—Display:5.7"TFT 16K Color Display, 320*240 dots â—Size:245mm x 163mm x 52mm â—Weight:1.3KG(Without Package) â—Standard Probe:PP80x2
-
4.6 of 5.0 with 40 Reviews
SALE PRICE: $525.00 1% OFF
Manufacturer: Gossen Metrawatt
Brand: GOSSEN METRAWATT
Manufacturer: Gossen Metrawatt
Brand: GOSSEN METRAWATT
4½ Place TRMS Digital Multimeter for Industrial Use, e.g. in Chemical Process Engineering, Resolution: 12,000 Digits - 20 Multimeter Functions.
-
4.6 of 5.0 with 9 Reviews
SALE PRICE: $539.99 11% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 700G/TRACK
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 700G/TRACK
Software for the 700G Pressure Test Gauges. Manage your instruments and calibration data with this easy-to-use software. For use with 700G Series gauges to perform real time data logging. Enables data download and logging configurations to the 700G Series gauges for a remote logging event. Configure logging event reading rate, duration and measurement units. Upload measurements logged remotely and display or export measurements. Includes communication cable for connection to a PC and CD-Rom user manual.
-
4.6 of 5.0 with 5 Reviews
SALE PRICE: $539.99 3% OFF
Manufacturer: Fluke
Brand: Fluke
Model: 4629301
Manufacturer: Fluke
Brand: Fluke
Model: 4629301
A fully functional current clamp meter that wirelessly relays measurements to other Fluke Connect enabled units.
-
4.6 of 5.0 with 11 Reviews
SALE PRICE: $549.99 6% OFF
Manufacturer: Micsig
Brand: Micsig
Manufacturer: Micsig
Brand: Micsig
|
Overview: Micsig Handheld oscilloscope TO1102 is the hobbyists' favorite on line shop because of super cost effective. It uses double injection plastic mould making oscilloscope high IP level and giving you better handling experience; And it weighs light so that you won't feel tired to use it. Besides, exclusively detachable battery design makes you no any worry in field testing. What's worth mentioning that it uses 8 inches 800*600 pixels industry TFT LCD touch screen & supports button, touch and scroll wheels operation mode; Integrating scope, meter & recorder in one unit and unique scroll wheel & touch designs making handheld operation more convenient; Rapid response of operation system & online built-in helping menu making your testing work really easy & high efficient. Features:    •Model: TO1102    •Bandwidth:100MHz    •Input Channel: 2    •Sample rate: 1GSa/S    •Memory depth: 28Mpts    •Max capture rate: 80,000 wfm/s    •Bandwidth limitation: 20MHz, high pass, low pass    •Interface: Wifi, LAN, HDMI,USB Host, USB Device, GND, DC Power, Trigger out    •Screen 8 inches TFT LCD 800*600 pixels display resolution,14*10 display range    •Dimension: 250*210*55mm    •Battery: 8,000mAh Li-ion battery Package list: 1x TO1102 oscilloscope 1x Battery 1x Carry Strap 1x Software 1x Handbag
-
4.6 of 5.0 with 3 Reviews
SALE PRICE: $611.42 21% OFF
Manufacturer: TM Atlantic
Brand: TM Atlantic
Color: white
Manufacturer: TM Atlantic
Brand: TM Atlantic
Color: white
This oscilloscope is very slim and lightweight. It has a large screen and a convenient carrying handle. Try and fall in love with it! This oscilloscope will always give you a hint how to use it. Just press "HELP" and get User Manual on your oscilloscopes screen! It is ideal for learning and if you forgot any oscilloscopes function. Dual channels + external trigger. Bandwidth 60 MHz. Sample rate (Real time) 500MS/s. Max Record length 10Mpts. 8? 800x600 Pixels LCD display.
|
|