Oscilloscopes & Accessories - Page 45

Manufacturer: Fluke Corporation Brand: Fluke Model: 3889490

Fluke TPS FLEX 24 flexible current probe, 45 to 3.0 kHz Frequency Range. Measuring range selectable per software: 1 to 100 A and 5 A to 500 A. Peak current for sinusoidal currents, 240 A, 1350 A. Intrinsic error: 1 percent. Frequency range: 45 Hz to 3.0 kHz. Operating voltage: 300 V CAT IV Phase Error: 0.5 degrees. Jaw Opening: 45-centimeters length, 2-meter cable.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-287/FVF

Fluke-287/FVF Kit includes Fluke-287 true-rms electronic logging multimeter with trendcapture, FlukeView forms software and cable, 80BK-A Thermocouple probe. CAT III 1000V 10A Modular test leads (red, black), CAT III 1000V 10A modular test probes (red, black), CAT II 300V 5A Alligator clips (red, black). C280 Soft case for meter protection and accessory storage. Maximize productivity with the combined Fluke 287 and FlukeView forms combo kit. Designed for today's professionals involved in the R and D, maintenance, manufacture and design of electronic circuits or systems. With built-in data logger and trendcapture capability, the 287 helps you track down elusive, intermittent problems or monitor equipment with any of its function. FlukeView forms enabling you to document store and analyze individual readings or series of measurements, overlay logged data to find cause and effect relationships, or turn your data into meaningful graphs and tables for a professional report. The 287/FVF combo kit gives you a practical and affordable approach to documenting circuit design performance.

Manufacturer: Hantek Brand: Quantong

Hantek 4CH 70MHz MSO5074FG Mixed Singal Oscilloscope with 8 Channels Logic Analyzer & 25MHz Arbitray Waveform Generator Specifications: 1.Horizontal •Model:MSO5074F •Bandwidth:70MHz •Channel:4 •Sampling Rate Range:1GSa/s •Memory Depth(Sample Points):1M •SEC/DIV Range:4ns/div-40s/div •Sampling Rate and Delay Time Accuracy:±50ppm in any ≥1ms time intervals 2.Vertical •A/D Converter:8-bit resolution,each channel sampled simultaneously •VOLTS/DIV Range:2mV/div-5V/div at input BNC •Position Range: ±400mV(2mV/div-20mV/div);±2V(50mV/div-200mV/div) ±40V(500mV/div-2V/div);±50V(5V/div) •Optional Analog Bandwidth LImit(typical):20MHz •Low Frequency Response(-3db):≤10Hz at output BNC •Rise Time:≤5ns •Vertical Gain Accracy: ±3% for sample or average acquistion mode,5V/div to 10mV/div ±4% for sample or average acquistion mode,5mV/div to 2mV/div 3. Trigger •Trigger Type:Video,Edge,Pluse Width,Slope,Overtime, Code-type,Duration,Queue,Repeat,Alternate •Trigger Sensitivity(Edge Trigger Type): •Trigger Level Range: CH1,CH2,CH3,CH4:±8 divisions from center of screen;EXT:±1.2V;EXT/5:±1.2V 4. Input •Input Coupling:DC,AC or GND •Input Impedance,DC coupled:1MΩ±2% for 20pF±3pF •Probe Attenuation:1X,10X •Supported Probe Attenuation Factor:1X,10X,100X,1000X 4. Logic Analyer •Sampled Channels:8 •Max.Input Impedance:200K(C=10p) •Input Voltage Range:0-3V •Logic Threshold Range:0-3V •Max.Sample Rate:500MSa/s •Sample Depth:1M 5. Arb.Waveform Generator •Frequency:DC-25MHz •DAC Clock:2K-200MHz adjustable •Waveform Resolution:0.1% •Depth:4KSa

Manufacturer: Hantek Brand: Hantek DSO1202B

Model:DSO1202B Bandwidth:200MHz Channel:2 Real-Sample Rate:1GSa/s Equivalent Sample Rate:25GSa/s Record Length:1M Rish time:≤1.7ns Timebase Accuracy:±50ppm Time Base Range:2ns/div-40s/div Input Impandance:1MΩ VOLTS/DIV Range:2mV/div～5V/div A/D Converter:8bit Position Range:±50V(5V/div), ±40V(2V/div～500mV/div), ±2V(200mV/div～50mV/div), ±400mV(20mV/div～2mV/div) DC Gain Accuracy:±3% for Normal or Average acquisition mode, 5V/div to 10mV/div; ±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div. Bandwidth Limit:20MHz Trigger Types:Edge, Video, Pulse, Slope, Over time, Alternative Trigger Source:CH1, CH2 Math +, -, x, ÷, FFT, Invert Cursor Measurement:Voltage difference between cursors: △V; Time difference between cursors: △T; Reciprocal of △T in Hertz (1/ΔT); Auto Measuerment:Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot, BWIDTH, FRF, FFR, LRR, LRF, LFR, LFF DMM Max. Resolution:6,000 Counts Testing Modes:Voltage, Current, Resistance, Capacitance, Diode & Continuity Max. Input Voltage:AC: 600V, DC: 800V Max. Input Current:AC:10A , DC: 10A Max. Input Impandance:10MΩ Display:5.6"TFT 16K Color Display, 640*480 dots Size:245mm x 163mm x 52mm Weight:1.3KG(Without Package) Standard Probe:PP200x2

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-572-2 Color: Multicolored

Fluke FLUKE-572-2 High-Temperature Infrared Thermometer with Dual Laser, -30/900°C Temperature Range Fluke 572-2 High-Temperature Infrared ThermometerView larger Fluke 572-2 High-Temperature Infrared ThermometerView larger For Higher Temperatures at Greater Distances The 572-2 has the largest temperature range and greatest distance-to-spot ratio of any of Fluke's IR thermometers. The dual-laser sighting system clearly shows the diameter of the area being measured for greater confidence in your readings. A 900°C (1652°F) maximum temperature makes the 572-2 suitable for many industrial environments including petrochemical, metal refining and smelting, power utility, cement and glass. Accuracy that's Easy to See With a 60:1 distance-to-spot ratio, the 572-2 is perfect for measuring temperatures in unreachable places. Whether its an air duct on the ceiling of a warehouse or a transformer on the top of a power pole, the dual lasers will clearly show you the diameter of the area you are measuring. Data Collection Save time in recording with the on-board memory of the 572-2. It can record up to 99 infrared temperature readings for later download to computer via USB cable. Easy Options for Emissivity Because adjusting emissivity is critical to accurate temperature readings, the 572-2 offers three ways to help. Select an emissivity manually from 0.10 to 1.00, use the K-type probe to match the IR reading with the contact reading, or use the built-in common materials table to best match the surface of measurement. Features Measure -30 °C to 900 °C (-22 °F to 1652 °F) 60:1 distance to spot ratio with dual laser sighting for fast, accurate targeting Multi-language interface (user select) Current Temperature plus MAX, MIN, DIF, AVG temperature displays Compatible with standard mini-connector K-type thermocouples, including ones you already own and have installed Adjustable emissivity and predefined emissivity table Infrared and thermocouple temperature on backlit display Last reading Hold ...

Manufacturer: Hantek Brand: Hantek DSO1202BV

Specifications: ●Model:DSO1202BV ●Bandwidth:200MHz ●Channel:2 ●Real-Sample Rate:1GSa/s ●Equivalent Sample Rate:25GSa/s ●Record Length:1M ●Rish time:≤1.7ns/≤3.5ns/≤5.8ns ●Timebase Accuracy:±50ppm ●Time Base Range:2ns/div-40s/div / 4ns/div-40s/div / 4ns/div-40s/div ●Video Help:Yes ●SD Card:2GB ●Input Impandance:1MΩ ●VOLTS/DIV Range:2mV/div～5V/div ●A/D Converter:8bit ●Position Range:±50V(5V/div),±40V(2V/div～500mV/div),±2V(200mV/div～50mV/div),±400mV(20mV/div～2mV/div) ●DC Gain Accuracy: ±3% for Normal or Average acquisition mode, 5V/div to 10mV/div; ±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div ●Bandwidth Limit:20MHz ●Trigger Types:Edge, Video,Pulse,Slope,Over time, Alternative ●Trigger Source:CH1,CH2 ●Math:+,-,x,÷,FFT, Invert ●Cursor Measurement: Voltage difference between cursors: △V; Time difference between cursors: △T; Reciprocal of △T in Hertz (1/ΔT); ●Auto Measuerment:Frequency,Period, Mean,Pk-Pk,Cycli RMS,Minimum, Maximum,Rise time,Fall Time,+Pulse Width,-Pulse Width,Delay1-2Rise,Delay1-2Fall,+Duty,-Duty,Vbase,Vtop,Vmid, Vamp,Overshoot,Preshoot,Preiod Mean, Preiod RMS,FOVShoot,RPREShoot, BWIDTH,FRF,FFR,LRR,LRF,LFR,LFF ●DMM Max.Resolution:6,000 Counts ●Testing Modes:Voltage,Current, Resistance,Capacitance,Diode & Continuity ●Max.Input Voltage:AC: 600V,DC: 800V ●Max. Input Current:AC:10A ,DC: 10A ●Max.Input Impandance:10MΩ ●Display:5.6"TFT 16K Color Display, 640*480 dots ●Size:245mm x 163mm x 52mm ●Weight:1.3KG(Without Package) ●Standard Probe:PP200x2

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-709

The Fluke 709 Precision Loop Calibrator and 709H Precision HART Loop Calibrator (the Product or the Calibrator) can be used for installation, calibration, and troubleshooting of field transmitters, valves, and other control system components at process plants. Primary functions are source and measure mA signals in the 0 mA to 24 mA range. The Product can measure 0 V to 30 V and produce 24 V dc loop power.

Manufacturer: Tektronix Brand: Tektronix Model: P5205A Color: Black

The Tektronix P5205A active differential probe has a 100MHz bandwidth and is suitable for use with a Tektronix oscilloscope (sold separately) for safely measuring floating voltages up to +/- 1300 V. It is switchable between x50 and x500 attenuation, and the TekProbe interface communicates scale information to a Tektronix oscilloscope. It includes hook clips, alligator clips, pincer clips, and extension cables. This active differential probe is European Conformity (CE) approved and CAT II 1000V safety rated, and is suitable for applications such as safely measuring voltages in IGBT circuits in motor drives or power converters.Oscilloscopes are electrical testing devices used to verify the functionality of an electrical signal generator. Oscilloscopes measure an electrical signal over time, and display the waveform signals in a visual graph. The waveform shows the sweeps (or refresh) of voltage on a vertical (Y) axis, and can display time on a horizontal (X) axis. Details of a waveshape demonstrate the signal over time. Oscilloscopes can display in a digital or analog view. An analog oscilloscope has continuous waveform display, typically in a luminous phosphor. Some oscilloscopes can display more than one channel and type of measurement simultaneously. Some oscilloscopes can capture waveform signals to memory, and recall them. Oscilloscopes may provide real-time intensity grading. Some oscilloscopes have the ability to adjust frequency of display. A constant image will display if a signal is shown at a high frequency. Oscilloscopes can be powered with batteries or electricity, or may have a built-in generator. They may have Canadian Standards Association (CSA) or European Conformity (CE) certification, or a specific category (CAT) safety rating, such as CAT5e. Oscilloscopes are commonly used for testing, measuring, and inspecting in science, engineering, telecommunications, automotive, and industry applications.Tektronix manufactures test and measurement equipment such as oscilloscopes, signal generators, and prot...

Manufacturer: Fluke Brand: Fluke Model: Fluke-805 FC

Make go or no-go maintenance decisions with confidence. The Fluke 805 FC Vibration Meter is the most reliable vibration screening device available for frontline mechanical troubleshooting teams that need repeatable, severity-scaled readings of overall vibration and bearing condition.

Manufacturer: UEi Test Instruments Brand: UEI Test Equipment Model: AAC3

Founded in Vancouver, BC in 1946, UEi Canada Inc. is a leading distributor of portable testing and measuring equipment for the HVAC and Electrical industry. In 1987, UEi Canada joined the Kane Group of companies with sister companies in England and United States.