Oscilloscopes & Accessories - Page 52

Manufacturer: Fluke Corporation Brand: Fluke Model: 424D Color: Multicolored

FLUKE FLUKE-424D DISTANCE METER, LASER, 100M

Manufacturer: OWON Brand: OWON Model: 01SDS7102

SDS7102 100 MHz Deep Memory DSO with 10 M points memory, 2 channels. New hardware version with standard LAN interface. This model also includes the VGA interface. Includes 2 probes, power cable, USB cable, manual and CD with software.

Manufacturer: Owon Brand: OWON Model: SDS6062-V

The Owon SDS6062-V is a 60 MHz, two-channel digital oscilloscope with a maximum real-time sample rate of 250 MS/s per channel (500 MS/s interleaved), a record length of 10 Mpts per channel, advanced triggering, three math functions and FFT, 20 automatic measurements, auto-scale function, pass/fail testing, a VGA port, and USB connectivity for electronics applications such as product design and debugging, repair and servicing, and electrical engineering education, among others. The high sample rate and deep memory enable long capture times for processing and displaying detailed waveforms. An external channel can trigger from a third source while acquiring data from channels 1 and 2. Edge, pulse width, slope, and video triggers allow isolation of specific signals, an alternate trigger allows simultaneous observation of two unrelated signals, and a trigger hold-off function stabilizes triggering on complex waveforms. The oscilloscope's math functions—add, subtract, and multiply—plus FFT (fast Fourier transform) and automatic measurements such as period, frequency, and peak-to-peak enable an in-depth analysis of waveforms. An auto-scale function selects the optimal settings for displaying a waveform, and can be disabled for educational exercises. Pass/fail mask testing determines whether a signal falls within the user-programmed settings. Up to 15 waveforms can be stored in the internal memory. Additional specifications include a rise time of 5.8 ns and various triggering features. The oscilloscope has an 8" color TFT (thin film transistor) LCD with a resolution of 800 x 600 pixels for viewing waveforms.The oscilloscope has a VGA port for connecting to an external monitor to view waveforms, a USB host port for storing data on a flash drive (sold separately), USB device and LAN ports for connecting to a PC, and includes Microsoft Windows compatible software for transmitting data and remote operation. The unit has European Conformity (CE) marking. It comes with two passive voltage probes; CD-ROM PC softwa...

Manufacturer: Owon Brand: OWON Model: SDS6062-V

The Owon SDS6062-V is a 60 MHz, two-channel digital oscilloscope with a maximum real-time sample rate of 250 MS/s per channel (500 MS/s interleaved), a record length of 10 Mpts per channel, advanced triggering, three math functions and FFT, 20 automatic measurements, auto-scale function, pass/fail testing, a VGA port, and USB connectivity for electronics applications such as product design and debugging, repair and servicing, and electrical engineering education, among others. The high sample rate and deep memory enable long capture times for processing and displaying detailed waveforms. An external channel can trigger from a third source while acquiring data from channels 1 and 2. Edge, pulse width, slope, and video triggers allow isolation of specific signals, an alternate trigger allows simultaneous observation of two unrelated signals, and a trigger hold-off function stabilizes triggering on complex waveforms. The oscilloscope's math functions—add, subtract, and multiply—plus FFT (fast Fourier transform) and automatic measurements such as period, frequency, and peak-to-peak enable an in-depth analysis of waveforms. An auto-scale function selects the optimal settings for displaying a waveform, and can be disabled for educational exercises. Pass/fail mask testing determines whether a signal falls within the user-programmed settings. Up to 15 waveforms can be stored in the internal memory. Additional specifications include a rise time of 5.8 ns and various triggering features. The oscilloscope has an 8" color TFT (thin film transistor) LCD with a resolution of 800 x 600 pixels for viewing waveforms.The oscilloscope has a VGA port for connecting to an external monitor to view waveforms, a USB host port for storing data on a flash drive (sold separately), USB device and LAN ports for connecting to a PC, and includes Microsoft Windows compatible software for transmitting data and remote operation. The unit has European Conformity (CE) marking. It comes with two passive voltage probes; CD-ROM PC softwa...

Manufacturer: Fluke Brand: Fluke Model: 4112750

Models covered: • Fluke 51 II Single Input Digital Thermometer • Fluke 52 II Dual Input Digital Thermometer • Fluke 381 Remote Display True RMS AC/DC Clamp Meter with iFlex • Fluke 789 ProcessMeter • Fluke 1587 Insulation Multimeter • Fluke 1735 Three-Phase Power Quality Logger.

Manufacturer: Gossen Metrawatt Brand: GOSSEN METRAWATT

The interface adapter can be snapped onto all METRAHIT 2xx, 30x, WORLD multimeters. Data are transmitted from the multimeter to the adapter in a electrically isolated, bidirectional fashion, and to the USB interface for PCs and laptops. Applications: Using this adapter you can connect multimeters (calibrators, milliohmmeters) of the METRAHIT series 22 ... 29S/M/C/i, 30M and WORLD, equipped with a serial IR interface to the USB interface of any personal computer. The adapter allows data transfer between multimeters and PC.

Manufacturer: Hioki Brand: Hioki

Memory Board 32MW for 8861 requires 2 Boards

Manufacturer: LeCroy Corporation Brand: LeCroy Model: WSXS-UART-RS232BUS TD

Advanced software algorithms deconstruct the waveform into protocol information, then overlay the decoded data on the waveform. Decode information condenses or expands depending on the timebase/ratio setting, so understanding messages is easy. Various sections of the protocol are color-coded to make it easy to understand, especially for users new to UART and RS-232 serial data. The decode operation is fast-even with long acquisitions. Choose to decode into hex, binary, or ASCII formats. LeCroy’s decode algorithms allow the CLOCK signal to be input to the external channel, which saves valuable channels for other signals. Or, if the CLOCK signal is input to a channel, it can be turned OFF as desired to reduce display clutter. Completely isolate specific UART or RS-232 message events for better understanding and debug. Use a conditional DATA trigger to select a range of DATA values to trigger on, not just a single DATA value. Oftentimes, I2C utilizes DATA bytes to specify sub-addresses for accessing memory locations in EEPROMs. Conditional DATA trigger allows triggering on a range of DATA bytes that correspond to reads or writes to specific sub-address memory blocks in the EEPROM. The UART trigger 8 and 9-bit formats are supported. Touch a message in the table and automatically zoom for detail. In all cases, the table never obscures your waveform data. UART, and RS-232 messages can be quickly located by searching on DATA. Pressing an arrow button advances the single zoomed message view one message to the right or left of the current message. Compatible with TD (Trigger and Decode) Option compatible with all WaveMaster 8 Zi/Zi-A, WavePro 7 Zi/Zi-A, WaveRunner 6 Zi, WaveRunner Xi and WaveSurfer Xs. Also compatible with WaveRunner Xi and WaveSurfer Xs having serial numbers of LCRY0608 and LCRY0304 respectively. Oscilloscopes with lower serial numbers can be upgraded. D (Decode) Option fully compatible with WaveRunner 6000, WavePro 7000, and WaveMaster 8000 Series.

Manufacturer: Micsig Brand: Micsig Model: TO1102B Color: Blue

If you cannot purchase your favorable oscilloscope due to low budget, tablet oscilloscope tBook mini TO1000 series is a real good choice. You absolutely can not miss it. tBook mini TO1000 series uses 8 inches industry TFT-LCD & 800*600 pixels display resolution, 2 or 4 channels, 70MHz & 100MHz bandwidth, 1 G Sa/s sample rate & up to 28Mpts memory depth and supports multi-touch capacitive screen, 256 intensity grading display and also supports LAN, WiFi, HDMI, USB Host, USB Device, Pass/Fail, Trigger out port and like that. Therefore, this series is your best choice for testing work. tBook mini TO1000 series integrates all of advantages in one instrument: super low budget, rapid response, easy operation, technology UI and abundant features.

Manufacturer: Owon Brand: OWON Model: SDS7102-V

The Owon SDS7102-V is a 100 MHz, two-channel digital oscilloscope with a maximum real-time sample rate of 500 MS/s per channel (1 GS/s interleaved), a record length of 10 Mpts per channel, advanced triggering, three math functions and FFT, 20 automatic measurements, auto-scale function, pass/fail testing, a VGA port, and USB connectivity for electronics applications such as product design and debugging, repair and servicing, and electrical engineering education, among others. The high sample rate and deep memory enable long capture times for processing and displaying detailed waveforms. An external channel can trigger from a third source while acquiring data from channels 1 and 2. Edge, pulse width, slope, and video triggers allow isolation of specific signals, an alternate trigger allows simultaneous observation of two unrelated signals, and a trigger hold-off function stabilizes triggering on complex waveforms. The oscilloscope's math functions—add, subtract, and multiply—plus FFT (fast Fourier transform) and automatic measurements such as period, frequency, and peak-to-peak enable an in-depth analysis of waveforms. An auto-scale function selects the optimal settings for displaying a waveform, and can be disabled for educational exercises. Pass/fail mask testing determines whether a signal falls within the user-programmed settings. Up to 15 waveforms can be stored in the internal memory. Additional specifications include a rise time of 3.5 ns and various triggering features. The oscilloscope has an 8" color TFT (thin film transistor) LCD with a resolution of 800 x 600 pixels for viewing waveforms.The oscilloscope has a VGA port for connecting to an external monitor to view waveforms, a USB host port for storing data on a flash drive (sold separately), USB device and LAN ports for connecting to a PC, and includes Microsoft Windows compatible software for transmitting data and remote operation. The unit has European Conformity (CE) marking. It comes with two passive voltage probes; CD-ROM PC softwar...