Oscilloscopes & Accessories - Page 59

Manufacturer: Fluke Corporation Brand: Fluke Model: 4116762

Fluke softcase for 174X and 43X-II power quality analyzer.

Manufacturer: Syscomp Electronic Design Ltd. Brand: Syscomp Model: CGR-202

The CircuitGear kit includes the following items: Syscomp CircuitGear CGR-201 Oscilloscope, Oscilloscope Probes, BNC-to-Alligator Clip Lead, Rear-Panel Rainbow Color Ribbon Harness.

Manufacturer: Fluke Corporation Brand: Fluke Model: 617727

The Fluke i410 current clamp is an accessory that extends the range of digital multimeters for measuring current in electrical testing applications. An attached 1.6m output cable connects the clamp to a compatible multimeter that can accept safety-shrouded banana plugs and display 1 milliVolt (mV). It has a clamp that measures AC and DC current to 400 amp. The clamp has two jaws that can close around an electrical conductor up to 30mm in diameter to measure current without touching or interrupting the circuit. It has a zero error adjustment to set the mulitmeter's display to zero for accurate DC readings. The unit operates on one 9V battery. It meets International Electrotechnical Commission (IEC) safety standards 61010-1 and is rated for CAT III installations to 600V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. The European Conformity (CE) marking indicates compliance with applicable European Union directives. The unit comes with a battery and instructions. Clamp meters are typically used by electrical engineers to measure properties of electrical current without physically touching or disconnecting the conductor.SpecificationsMaximum AC input400 ampMaximum DC input400 ampOutput level1mV per amp DC or ACBasic accuracy3.5% + 0.5 ampInstallation ratingCAT III, 600VStandards metIEC safety standard 61010, CE markingPower supply9VWeight0.5 kg/17.6 oz.Dimensions209 x 78 x 48mm/3.09 x 8.21 x 1.87 inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Clamp meters, also called clamp-on meters, measure electrical current without cutting through wires, or touching or interrupting the electrical circuit. Available in handheld or benchtop models, clamp meters diagnose problems in electrical equipment, wiring, and power supplies. A current clamp has two ...

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-CV201

The ClirVu coating - exclusive to Fluke infrared windows - seals the optic prior to assembly to protect against moisture degradation making it perfect for very hot and very cold environments.

Manufacturer: KKmoon Brand: KKmoon

Overview： This oscilloscope probe is professional oscillometer probe and very practical for testing the high voltage heavy current. The differential probe is used with oscilloscope probe and it can make isolation measurement and differential measurement.Note: Please read the instruction manual carefully to avoid injury and prevent damage to this product.Specifications: Bandwidth: 25MHz Rise Time: 14ns Accuracy: ±2% Attenuation Ratio: 1/50 & 1/500 Input Resistance: Single-ended to Ground: 4MΩ Between the two input: 8MΩ Input Capacitance: Single-ended to Ground: 7pF Between the two input: 3.5pF Maximum Differential Measurement Voltage: 1/50: 130V (DC + peak AC) 1/500: 1300V (DC + peak AC)  Maximum Common-mode Input Voltage: 1000Vrms(CATII), 600Vrms(CATIII) Noise Factor: 1/50: ≤1.5mVrms 1/500: ≤1mVrms Degree of Linearity: ±1% Latency Time: 20ns±1ns CMRR: DC: ≥80dB 100Hz: ≥60dB 1MHz: ≥50dB Outrange Alarm Threshold Voltage: 1/50: 140V ± 4V (DC + peak AC) 1/500: 1400V ± 40V (DC + peak AC) Power Adapter Output Voltage: DC9V, 1000mA Power Adapter Input Power Supply: AC100～240V, 50～60Hz Operation Environment: 0～40℃, 85%RH, 3000m Storage Environment: -10～45℃, 90%RH, 12000m Color: Black Material: PVC, Copper Pipe Length of the Incput Cable: Approx. 60cm / 23.6in Package List: 1 * High Voltage Isolating Probe 1 * AC Adapter 1 * Red Alligator Clip 1 * Black Alligator Clip 1 * Red Pincer Clip 1 * Black Pincer Clip  1 * Instruction Manual 

Manufacturer: AKTAKOM® Brand: AKTAKOM®

The ADS-2031V 30MHz bandwidth 2 channel digital storage oscilloscope with a 250MSa/s sample rate and an 8″ color TFT-LCD display, USB flash storage support and VGA-interface. Features •30MHz with 2+1 (External) channels •250MS/s •Ultra-thin body •Large 8″ 800×600 pixels LCD display, 65535 colors •Pass/Fail function •Add/remove measure function, user-defined measure menu •Interface: USB, USB flash disk storage, Pass/Fail, LAN ,VGA

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-CV300

The ClirVu coating - exclusive to Fluke infrared windows - seals the optic prior to assembly to protect against moisture degradation making it perfect for very hot and very cold environments.

Manufacturer: Hioki Brand: Hioki

Sensor Extension Cable for CM7290 2m.

Manufacturer: Hioki Brand: Hioki

Hioki IR4053-10 Insulation Tester. Digital Insulation Tester for Photovoltaic Generation Systems The Hioki IR4053 is a digital insulation resistance tester for photovoltaic generation systems. Measure insulation resistance accurate and safely without being affected by generated solar power and identify the value in just 4 seconds.   Measurement not affected by generating PV The IR4053, which was designed for PV, can accurately measure insulation resistance without being affected by the generating PV.   Accurate and safe measurement without creating shorts Normally, to accurately measure the insulation resistance of a generating PV, one needs to short the measured circuit. That's not necessary with the IR4053.   Displays measurement in 4 seconds The IR4053 displays the measured value just 4 seconds after starting measurement. After the first display, the displayed value is updated each second. Comfortably carry out swift measurements.   Comparator function / Red light You can compare measurements to any set values. If the result does not meet the set value, the red light will warn of nonconformance.   Drop proof The sturdy design won't break even if dropped onto concrete from 1 m, so you can use it with peace of mind.   Test lead with remote switch This allows you to apply output voltage with the switch in your hand, work with a light, and see the result of the comparator with an LED.

Manufacturer: Hantek Brand: Hantek DSO5102P

Features: •100MHz bandwidths •1GSa/s Real Time sample rate •Large (7.0-inch) color display, WVGA(800x480) •Record length up to 40K •Trigger mode: edge/pulse width/line selectable video/slop/overtime etc. •USB host and device connectivity, standard •Multiple automatic measurements •Four math functions, including FFTs standard •Provides software for PC real-time analysis Specifications: •Model:DSO5102P •Bandwidth:100MHz •Channel:2 •Real-Time Sample:1GSa/s •Equivalent Sample:25GSa/s •Memory Depth:40K •Rise Time:3.5ns •Time Base Accuracy:±50ppm •Time Base Range:4ns/div-40s/div •Input Impendance:1MΩ •VOLTS/DIV Range:2mV/div～5V/div •A/D Converter:8 bit •Position Range:±50V(5V/div),±40V(2V/div～500mV/div), ±2V(200mV/div～50mV/div),±400mV(20mV/div～2mV/div) •DC Gain Accuracy: ±3% for Normal or Average acquisition mode, 5V/div to 10mV/div; ±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div •Bandwidth Limit:20MHz •Trigger Types:Edge,Video,Pulse,Slope, Over time, Alternative •Trigger Source:CH1,CH2,EXT,EXT/5, AC Line •Math:+,-,x,÷,FFT •Cursor Measurement: Voltage difference between cursors: △V; Time difference between cursors: △T; Reciprocal of △T in Hertz (1/ΔT); •Auto Measuerment:Frequency, Period, Mean,Pk-Pk,Cycli RMS,Minimum, Maximum,Rise time,Fall Time,+Pulse Width,-Pulse Width,Delay1-2Rise, Delay1-2Fall,+Duty,-Duty,Vbase,Vtop, Vmid,Vamp,Overshoot,Preshoot,Preiod Mean,Preiod RMS, FOVShoot, RPREShoot,BWIDTH,FRF •Display:7" TFT 16K Color LCD,800*480 dots