Oscilloscopes & Accessories - Page 55

Manufacturer: Fluke Corporation Brand: Fluke Model: EI-1625

The Fluke clip-on current transformer clamp set is used to perform selective or stakeless testing with the Fluke 1625 earth ground tester. Selective testing uses one clamp and stakes to measure earth ground loop resistance values for one ground electrode. Stakeless testing uses two clamps to test ground loop resistance. Both the selective and stakeless methods eliminate the need to disconnect the electrode from the grounding system for increased safety and fewer testing steps. One clamp is voltage inducing, and the other clamp is current sensing. Both clamps have a 50.8mm/2" inside diameter. Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-700RG31

The 700G Series Pressure Gauges (the Product) are high-accuracy digital pressure test gauges.

Manufacturer: Fluke Corporation Brand: Fluke Model: Fluke-123/003S

The Fluke ScopeMeter series 120 is a handheld electrical test device that combines a two-channel digital oscilloscope for viewing electrical signals with a true RMS, manual- and auto-ranging digital multimeter on each input for measuring AC and DC voltage to 1,250V, resistance to 50MΩ, capacitance to 500μF, frequency to 50MHz for Fluke 123 models and 70MHz for Fluke 124 models, and duty cycle from 2% to 98%. The oscilloscope has a real-time sample rate of 25MS/s and a record length of 512 points per channel for acquiring waveforms. Automatic and cursor measurement parameters allow an in-depth analysis of waveforms, and edge and video triggers allow isolation of specific signals. The oscilloscope's advanced automatic triggering recognizes signal patterns and automatically optimizes triggering, timebase and amplitude settings. It has an optical port for attaching a Fluke ITP120 probe (sold separately) for external triggering. The 5,000-count, true RMS (root mean square) multimeter provides accurate readings when measuring linear or non-linear loads, regardless of waveform. It has two ranging modes: manual, which allows the user to select the operating range, and auto, which automatically selects the appropriate operating range. The relative function allows a measurement to be set as a reference value and displays subsequent measurements as a positive or negative deviation from that value, the touch-hold mode captures a stable reading, and the data-hold function freezes a reading on the display to aid documentation. A continuity buzzer confirms that the circuit conducts electricity, and a diode check detects whether a circuit’s diodes are working properly. Setups and screen shots—up to 10 for the 20MHz models and 20 for the 40MHz models—can be stored in the internal memory. A TrendPlot chart recorder graphs readings from both the oscilloscope and multimeter functions of the minimum and maximum values over time. The recorder can be programmed from 15 seconds per division over 120 seconds to...

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-725 US

The multifunction process calibrator is a powerful yet easy-to-use field calibrator. Use the measure and source functions to test and calibrate almost any process parameter. Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters. Support flow meter testing with frequency and CPM functions. Perform fast linearity tests with auto- step and auto-ramp features. Power transmitters during test using loop supply with simultaneous mA measurement. Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 10 ms. Store frequently used test setups for later use. Backlight lets you work in poor light. Large battery capacity of four AA cells. Battery door for easy changes. Voltage range: 0 to 100 mV, 0 to 10V (source), 0 to 30V (measure); voltage resolution - 0.01 mV, 0.01V, 0.01V; voltage accuracy - 0.02 percent Rdg + 2 LSD. Notes Max load, 1 mA. mA: 0 to 24 range, 0.001 mA resolution, .02 percent Rdg + 2 LSD accuracy. Notes max load, 1000 ohm. mV (TC terminals): -10.00 mV to 75.00 mV range, .01 mV resolution, .025 percent of range + 1 LSD accuracy. Resistance: 15 to 3200 ohm range, 0.01 to 0.1 ohm resolution, 0.10 to 1.0 ohm. Frequency range: 2.0 to 1000.0 CPM, 1 to 1000 Hz, 1.0 to 10.0 kHz; Frequency resolution - 0.1 CPM, 1 Hz, 0.1 kHz; Frequency accuracy - +/-.05 percent, +/-.05 percent, +/-.25 percent. For frequency source, waveform is 5V p-p squarewave, -0.1V offset. Loop Supply: 24V dc range, 10 percent accuracy. 30V maximum voltage. -40 to 71 degree C storage temperature. -10 to 55 degree C operating temperature. Relative humidity: 95 percent (10 to 35 degree C), 75 percent (30 to 40 degree C), 45 percent (40 to 50 degree C), 35 percent (50 to 55 degree C). Shock: 30g, 11ms, half-sine shock (or 1meter drop test). Vibration: random, 2g, 5-500 Hz. safety: CSA C22.2 No. 1010.1:1992. Battery: Four AA alkaline batteries. Battery life: 25 hours typical. Three years warranty.

Manufacturer: withutrade Brand: Hantek HT25

The HT201 has been designed to allow fuel injector and primary ignition waveforms to be measured using Hantek oscilloscope products. Please note this attenuator should not be used for any high voltage measurements other than fuel injectors and primary ignition. Specification: Attenuation: 20:1 Bandwidth: 10MHz Input Res: 1.053M

Manufacturer: Hantek Brand: Hantek PP80

Oscilloscope Rapier Performance & Characteristics ● Attenuation ratio: 1× and 10× optional. ● Portable design according with ergonomics. ● Integral injection molding makes the usage more flexible and the oscilloscope able to adapt more testing situations. ● Safety standards: it has passed the CE Attestation of European Community. Application Fields ● Compatible with domestic and international digital and analog oscilloscopes in relevant frequency. ● Measurement in intermediate and low frequency signals. Order Information Accessories included by PP series passive voltage rapier ● Operation manual ● Adjusting tool: adjusts compensation capacitance to assure the rapier match with oscillograph. ● Contractive-type acuminate hook ● 12cm earth wire with alligator clip ● 4 pairs of colorized cable markers ● Locating sleeve adapts to IC testing. Double-nip wire

Manufacturer: Zokop Brand: Zokop

Features: 1. New and high quality materials 2. Smooth surface is comfortable in hand feel 3. Solid structure and high strength 4. High sensitivity, excellent performance and reliable function 5. Injection molding ground wire to ensure its service life 6. Easy to operate 7. Low power consumption and energy-saving Specifications: 1. Model: P6200 2. Weight: 1.76oz / 50g 3. Cable Length: 38.78" / 98.5cm 4. Dimensions: (6.81 x 0.63)" / (17.3 x 1.6)cm (L x W) 5. Color: Gray 6. System Bandwidth: 200MHz 7. Working Voltage: 1X: 200Vp-p; 10X: 600Vp-p 8. Compensation Range: 10pF - 35pF 9. Input Capacitance: 1X: 70pF; - 120pF 10X: 13pF - 17pF 10. Input Resistance: 1X: 1MΩ; 10X: 10MΩ 11. Attenuation Ratio: 1X/ 10X 13. Storage Temperature: 0℃ - 50℃; 0 - 80%RH 14. Working Temperature: -20℃ - 60℃; 0 - 90%RH 15. Rise Time: 1.75ns Package Includes: 1 x Oscilloscope Probes 1 x Screwdriver 2 x Tip Locating Sleeves 6 x Marker Bands 1 x Manual 1 x Ground Spring

Manufacturer: RioRand Brand: Hantek Model: PP150

Brand: RioRand; For oscilloscopes with bandwidth up to 100 MHz, durable modular construction, coaxial design with coaxial REED switch, accessory Pack included 1 screw driver 8 marker bands 4 tip locating sleeves 2 mini alligator clips and ground leads 2 interchangeable probe clip tips.

Manufacturer: TIEKR Brand: TIEKR

TIEKR T1 offers 100MHz bandwidth probe This is ideal for testing probe for any oscilloscopes with different brands. Specifications All specifications are guaranteed unless noted otherwise. Model TIEKR T1 Nominal length 1.2 m Bandwidth 100Mhz Loading 10X: 10MΩ/13 pF1 1X: 1MΩ/95 pF Attenuation 10X 1X Maximum input voltage X1 :150V AC X10:300V AC CAT II Compensation range (pf) 10 to 30 Warranty One year parts and labor. Includes in the Box:  TIEKR T1 Probe Hook tip ground lead Adjustment tool Color bands Instruction manual

Manufacturer: SainSmart Brand: SainSmart

Description: DSO138 is partially open-sourced. This opens the possibility for users to add different features or develop new applications on the hardware Features: - Highest real-time sampling rate : 1Msps - Accuracy : 12Bit - Sampling buffer depth : 1024 bytes - Analog bandwidth : 0 - 200KHz - Vertical sensitivity : 10mV / Div - 5V / Div ( 1-2-5 progressive manner ) - Adjustable vertical displacement , and with instructions - Input impedance : 1M ohm - Maximum input voltage : 50Vpp (1: 1 probe ), 400Vpp (10: 1 probe ) - Coupling modes include DC / AC / GND - Horizontal time base range : 10us / Div - 50s / Div ( 1-2-5 progressive manner ) - With automatic , conventional and single -shot mode , easy waveform capture the moment - Available rising or falling edge trigger - Adjustable trigger level position , and with instructions - Coupling modes include DC / AC / GND - Observable trigger waveform before ( Negative delay ) - Freeze the waveform display (By pressing HOLD function) - Shutdown Current: 20nA Package list: - DSO138 osciloscop - One FREE Probe Note : This is a fully Assembled and Soldered professionally