Oscilloscopes & Accessories - Page 60

Manufacturer: TENMA Brand: Tenma Model: 72-10160-TENMA

Bandwidth: 60MHz. Bandwidth: 60MHz. Input Impedance: 1Mohm. Input Impedance: 1Mohm. Meter Display Type: -. Meter Display Type: -. Plug Type: -. Plug Type: -. Rise Time: 5. 8ns. Rise Time: 5. 8ns. SVHC: To Be Advised. Sampling Rate: 150MSPS. Sampling Rate: 150MSPS. Scope Channels: 2 Analogue. Scope Channels: 2 Analogue. Scope Type: PC Based. Scope Type: PC Based. Series: -. Series: (Not Ava

Manufacturer: Micsig Brand: Micsig Model: TO1072B Color: Blue

Leave us your reviews in our shop to get the bandwidth (70MHz to 100MHz) and memory depth(14Mpts to 28Mpts) to upgrade freely. If you cannot purchase your favorable oscilloscope due to low budget, tablet oscilloscope tBook mini TO1000 series is a real good choice. You absolutely can not miss it. tBook mini TO1000 series uses 8 inches industry TFT-LCD & 800*600 pixels display resolution, 2 or 4 channels, 70MHz & 100MHz bandwidth, 1 G Sa/s sample rate & up to 28Mpts memory depth and supports multi-touch capacitive screen, 256 intensity grading display and also supports LAN, WiFi, HDMI, USB Host, USB Device, Pass/Fail, Trigger out port and like that. Therefore, this series is your best choice for testing work. tBook mini TO1000 series integrates all of advantages in one instrument: super low budget, rapid response, easy operation, technology UI and abundant features.

Manufacturer: Micsig Brand: Micsig Model: TO1102 Color: Blue

If you cannot purchase your favorable oscilloscope due to low budget, tablet oscilloscope tBook mini TO1000 series is a real good choice. You absolutely can not miss it. tBook mini TO1000 series uses 8 inches industry TFT-LCD & 800*600 pixels display resolution, 2 or 4 channels, 70MHz & 100MHz bandwidth, 1 G Sa/s sample rate & up to 28Mpts memory depth and supports multi-touch capacitive screen, 256 intensity grading display and also supports LAN, WiFi, HDMI, USB Host, USB Device, Pass/Fail, Trigger out port and like that. Therefore, this series is your best choice for testing work. tBook mini TO1000 series integrates all of advantages in one instrument: super low budget, rapid response, easy operation, technology UI and abundant features.

Manufacturer: Tektronix Brand: Tektronix Model: TDS3VID

The Tektronix TDS3VID video application module triggers on specific lines in broadcast and non-broadcast (custom) standards and on analog HDTV formats (1080i, 1080p, 720p, 480p), and is intended for use with Tektronix TDS3000C series oscilloscopes. It supports Vectorscope graticules (100% and 75% color bars) and requires a component video signal.Tektronix manufactures test and measurement equipment such as oscilloscopes, signal generators, and protocol, logic, and spectrum analyzers. The company, founded in 1946 and headquartered in Beaverton, OR, meets International Organization for Standardization (ISO) standards 9001 and 14001.

Manufacturer: Atten Brand: Atten

Looks like new, comes with all manuals and original box.

Manufacturer: Hantek Brand: Hantek Model: DSO3064A

General Description: 60MHz bandwidth; 4 channels oscilloscope; Models with many extra functions like arb. waveform generator, logic analyzer to select; USB 2.0 interface, LAN optional. Detailed Description: 8--36V wide range of input voltage, suitable for vehicle power test. USB 2.0 interface, LAN optional. More than 20 kinds of automatic measurement function, PASS/FAIL Check function, is suitable for engineering application. Excellent industrial design,similar interface with bench oscilloscope. Easy to use. Software support: Windows NT, Windows 2000, Windows XO, VISTA, Windows 7. Supply DEMO code(VC, VB, LABIEW) and technical support. Analog Channels-4 ,Arb. Waveform Generator-NO ,Logic Analyzer-NO

Manufacturer: Fluke Corporation Brand: Fluke Model: 2673962

Fluke polyester case for 1750 and 1760 3 phase power quality recorders.

Manufacturer: Fluke Brand: Fluke Model: 4542264

The Fluke Series Battery Analyzer is ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications.

Manufacturer: Pico Brand: Pico

PicoLog CM3 Data Logger with No Current Clamps. PicoLog CM3 CURRENT MONITORING DATA LOGGER The new PicoLog CM3 USB/Ethernet Current Data Logger is a compact, easy-to-use instrument for measuring the current consumption of buildings and machinery. With three channels, high accuracy and low noise, it is ideal for recording data from both single-phase and three-phase AC supplies. The logger is supplied complete with three AC current clamps and all necessary software. The USB and Ethernet interfaces allow the logger to be used as a USB-only device, as a USB-powered device with Ethernet interface, or as a Power-over-Ethernet (PoE) device. Using the Ethernet interface, the PicoLog CM3 can be located anywhere on a LAN or on the internet.   CM3 Current Data Logger The PicoLog CM3 is a three-channel data logger that uses industry-standard current clamps. Simply connect to your PC via USB or Ethernet, run the supplied software and you can monitor and log current for a wide range of applications.  Suitable for single or three-phase alternating currents Non-invasive measurent  High resolution and accuracy No power supply required USB and Ethernet interfaces Run multiple units on a single PC Typical applications Mains power monitoring  Three-phase load balancing Long-term energy use recording Energy and cost saving / ISO14001 monitoring Flexible, expandable software included Your PicoLog CM3 Current Data Logger is supplied with PicoLog data logging software. With PicoLog you can collect up to one million measurements, analyze them and then display the results in spreadsheet and graphical formats. PicoLog can record data from multiple PicoLog data loggers at the same time. This allows you to collect up to 60 channels of current

Manufacturer: Hioki Brand: Hioki

Hioki CM7290 Display Unit for CT7000 Series Current Sensors Hioki CM7290 Display Unit for CT7000 Series Current Sensors ×   Display and Output Unit for the CT7600 and CT7700 Series AC/DC Current Sensors   Hioki clamp on meters are best-in-class measuring devices incorporating Hioki's expertise in current sensing technology. The CM7290 is the display and output unit for the CT7600 and CT7700 AC/DC Current Sensor series, creating a standalone clamp meter for field use or enabling waveform signals to be output to a Hioki memory recorder or logger for further analysis. The CM7290 Display Unit is to be used with a current sensor equipped with a Hioki PL14 output connector. It will automatically recognize the current sensor when it is connected, and the range and output rate will be automatically set. Set the measurement mode to AC or DC so that the unit can display or output values.   The unit supports simultaneous dual displays - for example, of the measured value and output rate during output, or of the current measured value and maximum value. You can clamp the sensor in high or confined locations, and view the display close at hand. And even when you're in low-light conditions, the backlight feature will allow easier reading of displayed values.   With the optional output cord, waveforms, rms vales and so forth can be output in analog form to a recorder, logger or power meter for waveform observation, long-term recording, power analysis or similar application.   Supports 2 power sources - AC adapter and batteries - for prolonged measurement. The unit can be turned on by powering an AC adapter, so installation into other devices is made possible