Oscilloscopes & Accessories - Page 82

Manufacturer: Hioki Brand: Hioki

The Hioki LR8512 are input modules of a wireless multi-channel data logger of pulse, logic signal and AC/DC current using Bluetooth® technology to send measured data to a central logging station. LR8410 series Wireless logger. Note: The LR8512 alone is not capable of making measurements. Countries and regions where wireless operation is currently supported: Japan, U.S.A., Canada, EU, Norway, Switzerland, Turkey, Russia, Vietnam, and India. Bluetooth® is a trademark of Bluetooth SIG, Inc. and licensed for use by HIOKI E.E. CORPORATION.

Manufacturer: Micsig Brand: Micsig Model: TO1074B

Leave us your reviews in our shop to get the bandwidth (70MHz to 100MHz) and memory depth(14Mpts to 28Mpts) to upgrade freely. If you can¡¯t purchase your favorable oscilloscope due to low budget, tablet oscilloscope tBook mini TO1000 series is a real good choice. You absolutely can not miss it. tBook mini TO1000 series uses 8 inches industry TFT-LCD & 800*600 pixels display resolution, 2 or 4 channels, 70MHz & 100MHz bandwidth, 1 G Sa/s sample rate & up to 28Mpts memory depth and supports multi-touch capacitive screen, 256 intensity grading display and also supports LAN, WiFi, HDMI, USB Host, USB Device, Pass/Fail, Trigger out port and like that. Therefore, this series is your best choice for testing work. tBook mini TO1000 series integrates all of advantages in one instrument: super low budget, rapid response, easy operation, technology UI and abundant features.

Manufacturer: RioRand Brand: RioRand Model: RR-XD-TL-CS

Model: UTD2102CEX Quantity :1 Color: White + grey Material :ABS Features :100MHz bandwidth, 1G sampling rate Special Functions: 2-Channel Application :Test frequency LCD Display :7inch 64K color TFT LCD Display Resolution: 800 x 480 Analog bandwidth :100MHz Max sample rate: 1G Sample memory depth: 25kpts Vertical sensitivity :1mV/div~20V/div Display Language :Chinese, Traditional Chinese, Portuguese. Spanish, Russian, Dutch, English, German, French Other Data: Rise time:

Manufacturer: Fluke Corporation Brand: Fluke Model: 2540697

Fluke voltage test probe for 1760 3 phase power quality recorder. Range Rms: 10 V to 1000 V. Vnom: 600 V. Maximum continue: 1000 V. Fast transient range: Vp less than 1ms: 6000. Intrinsic error: greater than 0.1 percent. Operating voltage: 600 V CAT IV.

Manufacturer: Hantek Brand: Hantek DSO3062L

Oscilloscope Mode Vertical System Analog Channels:2;Bandwidth:60MHz(-3dB) Rise Time:5.8ns Input Impedance:Resistance: 1MΩ; Capacitance: 25 pF Input Sensitivity:10mV/div to 5V/div Input Coupling:AC/DC/GND Vertical Resolution:8 bits Memory Depth:10K-16M/CH Maximum Input:400V (DC+AC Peak) Horizontal System Real-Time Sampling Rate:200MS/s Time BaseRange:5ns/div to 1000s/div(1-2-5 sequences) Time Base Precision:±50ppm Trigger System Source:CH1, CH2, EXT Mode:Edge,Pulse,Viedo,Alternative X-Y MODE X-Axis Input:CH1 Y-Axis Input:CH2 Phrase Shift:Max.3 degree Cursors and Measurement Voltage Measurement:Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase,Vavg, Vrms, Vcrms, Preshoot, Overshoot Time Measurement Frequency,Period, Rise Time, Fall Time, PositiveWidth, Negative Width, Duty Cycle Cursors Measurement:Horizontal ,Vertical, Track, Auto Measure Modes Waveform Signal Process:+,- , x,÷, FFT, Invert AUTO SET:Yes Voltage Range:10mV to 5V/div @ x 1 probe; 100mV to 50V/div @ x 10 probe; 1V to 500V/div @ x 100 probe; 10V to 5000V/div @ x 1000 probe; 100V to 50000V/div @ x 10000 probe; 200mV to 100V/div @ 20:1 Current Range: CC65(20A),CC65(60A),CC650,CC1100 FFT Rectangular, Hanning,Hamming, Blackman Window Math:Adition, subtraction, multiplication, division Logic Analyzer Mode High input impendence:200K(C=10p) Input Voltage range:-60V~60V Logic threshold range:-6~6V Max Sample Rate:100MHz Bandwidth:10MHz Compatible input:TTL, LVTTL, CMOS, LVCMOS,ECL, PECL, EIA Storage depth:10K-16M/CH

Manufacturer: Hantek Brand: Hantek HDG2002B

Specifications: 1.Main Features •Model:HDG2002B •Channel:2 •Waveform Length:64M •Bandwidth:5MHz •Frequency:1μHz-5MHz •Sample Rate:250MSa/s •Voltage Resolution:16Bit •Digital Output Mode:16 Channels 2.Frequency Characteristics •Waveform:Sine,Square,Ramp,Pulse,Noise,Sinc,Exponential Fall,ECG,Gauss,Haver Sine, Lorentz,Dual-Tone,DC •Sine:1μHz-5MHz •Square: 1μHz-5MHz •Pulse: 1μHz-5MHz •Ramp: 1μHz-1MHz •White Noise:5Mhz •Harmonic/Arbitray: 1μHz-1MHz •Resolution: 1μHz •Accuracy:±2ppm,18℃-28℃ 3.Square •Rise/Fall time(Typical):＜18ns •Overshoot:Typical Value(100KHz,1Vpp)＜3% •Duty Cycel:≤10MHz:20.0%-80.0%;10MHz-40MHz:40.0%-60.0%;＞40MH:50.0%(fixed) •Non-symmetry:1% of period+5ns 4.Ramp •Linearity:≤1%(Typical,1kHz,1VPP,Symmetry 100%) •Symmetry:0%-100% 5.Pulse •Period:200ns-1millons •Pulse:≥18ns •Leading/Trailing Edge Time: 12ns •Overshoot:Typical (1Vpp)＜3% 6.Amplitude Characteristic •Amplitude Range:≤20MHz:1mVpp-20Vpp; ≤60MHz:1mVpp-15Vpp; ≤80MHz:1mVpp-10Vpp ;≤90MHz:1mVpp-5Vpp; ≤10MHz:1mVpp-2Vpp •Resolution:1mv or 4 digits •Isolation:＜-80dB •Impedance:50Ω(Typical) 7.Modulation Characteristic:Support AM,FM,PM,ASK,FSK,PSK and PWM modulations 8.Burst Characteristic •Burst Count:200000000 •Gated Source:External Trigger •Trigger Source:Internal External or Manual 9.Sweep Characteristic •Direction:Up •Type:Linear •Sweep/Hold/Return Time:280000s

Manufacturer: Rigol Brand: Rigol Model: DP831

Triple Output, 160 Watt Power Supply     SCPI Status Registers All the SCPI instruments execute the status register operations in the same way. The status system records the various instrument states into three register sets: status byte register, standard event register and questionable status register sets. The status byte register records the advanced summary information reported by other register sets. The SCPI status systems of the DP800 series multi-channel models. SCPI Command Overview SCPI (Standard Commands for Programmable Instruments) is a standardized instrument programming language that is built upon the standard IEEE488.1 and IEEE 488.2 and conforms to various standards (such as the floating point operation rules in IEEE754 standard, ISO646 7-bit coded character for information interchange (equivalent to ASCII programming)). This section introduces the syntax, symbols, parameters and abbreviation rules of the SCPI commands. Build Remote Communication You can build the remote communication between DP800 and PC over USB, LAN, RS232 or GPIB (option, can be extended via the USB-GPIB interface converter) interface. Remote Controls Methods User-defined Programming You can program and control the instrument using the SCPI (Standard Commands for Programmable Instruments) Send SCPI Commands via the PC Software You can control the power supply remotely by sending SCPI commands via the PC software (Ultra Sigma) provided by RIGOL. OVERVIEW   The Rigol DP831 is a very high quality programmable laboratory power supply with three switchable outputs (+8 V/5 A, +30 V/2 A and -30 V/2 A) and a maximum power output of 160 W. Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure. The Rigol DP831 features a relative large (8.9 cm / 3

Manufacturer: Tektronix Brand: Tektronix Model: TPSCHG

TEKTRONIX TPSCHG BATTERY CHARGER

Manufacturer: Hioki Brand: Hioki

The Hioki LR8513 are input modules of a wireless multi-channel data logger of pulse, logic signal and AC/DC current using Bluetooth® technology to send measured data to a central logging station. LR8410 series Wireless logger. Note: The LR8513 alone is not capable of making measurements. Current sensors are required and are sold separately. See the Accessories Tab to find all the available options to suit your specific application. Countries and regions where wireless operation is currently supported: Japan, U.S.A., Canada, EU, Norway, Switzerland, Turkey, Russia, Vietnam, and India. Bluetooth® is a trademark of Bluetooth SIG, Inc. and licensed for use by HIOKI E.E. CORPORATION.

Manufacturer: Gossen Metrawatt Brand: GOSSEN METRAWATT

PC.doc-WORD/EXCEL is a protocol software as an add-on to MS OFFICE products WORD and EXCEL for the testers: New in Version 9  Data transfer from the newest Secutest (4th Generation) New, modern, easy user interface Integration of company settings Display of the last 20 stored files to be processed Setting of directory paths to the memory locations of stored files and the database Generating the protocol by use of available protocol formulars Protocol formulars can be altered in WORD The software is useful for following testing instruments: SECUTEST BASE, BASE10 (new) PROFITEST MASTER, PROFITEST 0100S-II+, ONE, C PROFITEST 204 METRISO C GEOHM C SECUTEST SIII+, SECULIFE ST SECUTEST S2N+ / S2N+10 / S2N+W MINITEST MASTER, 3P-MASTER, PRO SECUTEST PSI, SI, SI+ PROFITEST PSI-E / (P)SI-BC The user interface is available in D, GB, F, FI, PL System requirements: Runs under Windows XP, Vista, Windows 7 (32 and 64 bit systems) - with WORD version 2003 or higher, Office 2007 and 2010 only 32 bit version (see below) - with EXCEL version 2000 or higher, Office 2007 and 2010 only 32 bit version (see below) PC with 500 MHz and 256 MB RAM minimum 1 serial port or USB interface and USB-RS232 adapter