Oscilloscopes & Accessories - Page 89

Manufacturer: Keysight Technologies Brand: KEYSIGHT TECHNOLOGIES Model: N4841A

The N4841A is a 9 cm dual lead socketed adaptor for use with N2795A/96A/97A single-ended active probes. The package contains two adaptors.

Manufacturer: LabNation Brand: LabNation

LabNation SMARTSCOPE The SmartScope combines 3 high-end instruments into 1 mobile, smart device. Accessible previously only to high-tech labs, the SmartScope allows everyone to own a personal lab! Starring a dual-channel 100MS/s oscilloscope, the SmartScope is the world's first lab instrument which works on both PC, laptop, tablet and smartphone. This is a must-have for any maker, and for anybody involved in hardware development! Key Product Highlights: 2x100MS/s 45MHz Oscilloscope 50MS/s Arbitrary Waveform Generator Digital logic analyzer at 100MS/s Digital waveform generator at 100MS/s 200 waveforms/second data updates Open Source   By giving full access to the framework of the SmartScope, a whole new dimension of possibilities is opening up. In its most basic form, this open framework allows you to hook up your creation to the extension ports of the SmartScope and control it from your PC or smartphone. When you're taking on more advanced projects, you'll appreciate the full access you have to the powerful FPGA. The framework is based on FPGA registers which you can control from the PC or tablet, giving you full control over your FPGA from the first moment you're starting. Even more, since you can flash the FPGA through the USB controller, you don't need to invest in expensive programmers!   Even more advanced projects can make use of the full-speed bi-directional data transfer capabilities, transferring data to or from your device.   Initially, all source files of the full framework will be presented as a git repository, together with additional repositories focusing on extremely simple samples, showing how to start developing for each of the components of the SmartScope. This will hopefully create community branches, which will be added to our community site

Manufacturer: TSI Brand: TSI Model: HMFIT

Hydronic manometer accessory kit includes 34 additional fittings and (2) itt bell and gosset read out probes.

Manufacturer: Hantek Brand: Hantek Model: RRDSO2250 Color: White

This Compact, Low Cost Product Offers You the Features only Found in High End, Very Expensive Standalone Digital Storage Oscilloscope. It combines the features of a traditional standard Digital Storage Oscilloscope in one compact unit at fraction of the cost.

Manufacturer: Pomona Electronics Brand: Pomona Model: 5698

The 5698 is a Universal Coaxial RF Adapter Kit that includes 2 pcs each (22 pcs total): BNC Male, BNC Female, TNC Male, TNC Female, SMA Male, SMA Female, N-Type Male, N-Type Female, four intermediate Couplers, one Double Banana Plug and one Double Banana Jack.

Manufacturer: Pico Brand: Pico

Pico 1216 PicoLog 1216 with Terminal Board   A distinguished pedigree The PicoLog 1000 Series is the result of a distinguished lineage that goes back to the release of our first multichannel data logger - the ADC-11 - in 1993. The original ADC-11, and its successor the USB ADC-11, proved to be the perfect choice for users wanting a low-cost way to measure and record multiple signals. The PicoLog 1000 Series builds on this success to give you the same low-cost data acquisition but with greater power and performance. (Because the ADC-11 was so popular we've also added a USB ADC-11 compatibility mode which allows you to use your PicoLog 1000 logger as a direct replacement to the USB ADC-11.) An expandable multichannel data acquisition system The budget model PicoLog 1012 has 12 input channels and 10 bit resolution. The powerful PicoLog 1216 has 16 channels and 12 bit resolution. Need more channels? No problem. Using PicoLog you can connect up to 4 Pico data loggers to one PC - giving you a potential 64 channel PicoLog 1000 Series data acquisition system, or the ability to use your PicoLog 1000 logger with other devices such as the USB TC-08 Thermocouple Data Logger. Optional Terminal Board The optional terminal board has screw terminals to allow sensor wires to be attached to the data logger without soldering. The terminal board also has locations where you can fit resistors to offset and extend the input ranges of the logger. Fast and accurate With 10 or 12-bit resolution and multiple sampling modes, a PicoLog 1000 Series logger will meet your data logging needs

Manufacturer: Probe Master Brand: Probe Master Model: 4918

3 Probe Master Kit includes (2) 4905-2RA, 10X, (1) 4902-2, 1X/10X, Includes 21 accessories and case

Manufacturer: LeCroy Corporation Brand: LeCroy Model: PACC-ZD007

Replacement accessory kit for active differential probe.

Manufacturer: GW Instek Brand: GW Instek Model: GDS-1052-U

The Instek GDS-1000-U series is a two-channel, portable digital oscilloscope with a maximum real-time sample rate of 250MS/s, a record length of 4 kpts, auto-set function, advanced triggering, two basic math functions and FFT, 19 measurement parameters, an internal memory for data storage, data logging, and USB connectivity for electronics applications such as such as product design, assembly lines, repair and servicing, and electrical engineering, among others. The sample rate and record length enable long capture times for displaying detailed waveforms. An auto-set function automatically configures the optimum settings for displaying waveforms by selecting the horizontal and vertical scales, positioning the waveform horizontally and vertically, and selecting and activating the trigger source channel. In addition to an edge trigger, the unit has pulse width and video triggers for isolating a specific signal. Two basic math functions—add and subtract—plus FFT (fast fourier transform) and 19 measurement parameters such as average, frequency, and peak-to-peak allow an in-depth analysis of waveforms. A go/no go test function promptly indicates when a signal falls outside user-defined settings, and a zoom function magnifies details of waveforms. Up to 15 waveforms or 15 setups can be stored in the internal memory of the oscilloscope. A data logging function tracks data at user-defined timed intervals for up to 100 hours, logging the data on a USB flash drive (sold separately). Additional specifications include a rise time of 7ns for the 50MHz model, 5ns for the 70MHz model, and 3.5ns for the 100MHz model, and various triggering features. The oscilloscope has a 5.7" color TFT (thin film transistor) LCD with a resolution of 320 x 234 pixels and can show simultaneously show up to two live and two stored waveforms. The oscilloscope has a USB host port for connecting a flash drive (sold separately) to store data and a USB device port for connecting to a PC for storing data and remote operation. The unit meet...

Manufacturer: GW Instek Brand: GW Instek Model: GDB-03

The GDB-03 training kit allows you to learn both the basic and the advanced functions of the GDS-3000 Series Digital Storage Oscilloscope (DSO). Following the training procedures of this training kit, you will quickly understand the basic operations of a DSO, and the unique features of the GDS-3000 Series, which represents a typical hi-tech DSO today.