Oscilloscopes & Accessories - Page 85

Manufacturer: Tenma Brand: Tenma Model: 76-102

' x1 / x10 attenuation 1.2m cable length 10pF ~ 35pF compensation adjustment Low noise, improved compensation design Meets EN61010-2-031 CAT I (IEC1010) requirements 600V maximum (DC + AC peak) Includes accessory kit and storage pouchSpecifications Input impedance x1: 1MΩ Input impedance x1: 10MΩ Rise time: '

Manufacturer: Fluke Corporation Brand: Fluke Model: C10 Color: Yellow

Snap-on yellow holster absorbs shocks and protects meter from rough handling. Includes built-in stand and hanger loop. One year warranty.

Manufacturer: Pico Brand: Pico

Pico MI007 Oscilloscope Probe 60 MHz x1/x10 The MI007 is a 60 MHz low-cost, general-purpose passive high-impedance oscilloscope probe designed for use with oscilloscopes. It is calibrated to work effectively with instruments that have an input impedance of 1 MΩ. A two-position slide switch on the probe handle allows the attenuation ratio to be switched between 10:1 and 1:1. The probe is equipped with a basic accessory pack including a retractable hook tip, compensation adjustment tool, 2 locating sleeves, 6 marker rings and a ground lead. Frequency Compensation Before taking any measurements using a probe, first check the compensation of the probe and adjust it to match the channel inputs. Most oscilloscopes have a square wave reference signal available at a terminal on the front panel used to compensate the probe. Connect the probe to this terminal or another 2 V pk-pk, 1 kHz square wave source.. Set the probe to 10X position. Adjust trimmer until seeing flat-top square wave on the display. Incorrect Incorrect Correct Voltage vs Frequency Rating Curve Accessories and Features MI007 is provided with several accessories designed to make probing and measurement simpler. Please take a moment to familiarize yourself with these accessories and their uses.

Manufacturer: Fluke Corporation Brand: Fluke Model: HC120

Set of two (one red, one gray) hook clips, designed for use with STL 120 shielded test leads and TL75 test leads. Accepts wires up to 2.5mm. The contact material is made of reinforced nickel plated steel. Maximum voltage: 600V rms. CAT III per IEC 1010-2-031 Maximum wire size: 2.5mm. Contact material: nickel plated steel.

Manufacturer: Fluke Corporation Brand: Fluke Model: BOOK-ITP

The Fluke BOOK-ITP Introduction to Thermography Principles provides an introduction to the principles of thermography for electrical engineers and technicians who monitor industrial processes and maintain utilities, electrical, and mechanical systems. It describes safe and efficient usage of thermal imagers for capturing high-resolution infrared images of thermal patterns in commercial, industrial, municipal, and residential environments and applications. The book includes 122 illustrations that depict thermal images of electrical, electro-mechanical, HVAC (heating, ventilation, and air conditioning), process and building inspection applications. It provides information about thermography analysis, reporting, and documentation. The full-color paperback book is 72 pages long and co-written by Fluke Corp. and the Snell Group.Thermal imagers, also known as thermal cameras, infrared imagers, or infrared cameras, capture images of heat patterns for examination and analysis. Objects emit infrared light, and this light radiates heat in varying temperatures. A sensor within a thermal imager detects radiant heat and transforms it into patterns on a thermal imaging system. Thermal imagers have LCD screens to display an image of the object in a range of color that corresponds with variations in temperature. Technicians can transfer images and video to a computer for process monitoring and analysis. Some thermal imagers can show visual images along with thermal images to make an object more identifiable. Thermal imagers are used in an array of industries, including construction and building maintenance, manufacturing, firefighting, medicine, law enforcement, and military among others. A wide range of applications include building diagnostics to identify hidden moisture or heat leaks, industrial and commercial maintenance to prevent or identify electrical or mechanical equipment failure, thermal cameras that restore visibility in fire control, medical and veterinary diagnostic imaging to identify health conditions, and survei...

Manufacturer: Fluke Corporation Brand: Fluke Model: HC200

Set of four hook clips (two red and two gray). Designed for use with VPS200, VPS100 and PM8918 series probes.

Manufacturer: VELLEMAN Brand: Velleman

VELLEMAN EDU09 EDUCATIONAL PC OSCILLOSCOPE KIT. Oscilloscopes are expensive and complicated instruments? Not this one! Build your own oscilloscope and use your PC to display your measurements. This small and easy to build kit has all the features of a full blown oscilloscope, just like our PCSU200 or PCSU1000. Kit comes complete with detailed instructions and test leads. THIS IS AN ELECTRONIC KIT AND REQUIRES ASSEMBLY

Manufacturer: Probe Master Brand: Probe Master Model: 4904-1RA

Oscilloscope probe with readout actuator, 150MHz, 10X, 600V, 3.5ft, BASIC KIT

Manufacturer: JYETech Brand: JYETech

DSO 112A is a low-cost pocket oscilloscope with a 2.4" touch-panel color display and integrated battery. 2 probes (male MCX to alligator clips) are included. DSO 112A was designed from the ground up for ease of operation. The touch screen and intuitive interface make this scope essentially self-teaching. It is not as easy to get lost in extraneous features as you might with other handheld scopes! Designed specifically for students and hobbyists DSO112A is a great entry-level oscilloscope. With a form factor that fits right in your palm and pocket, DSO112A is truly a pocket oscilloscope, with features that belies its dimensions. High sensitivity (5mV/Div), high accuracy, and low noise are highlights of DSO112A, and make it a great tool for small-signal probing. Scope includes integrated 2.4" TFT color LCD (320 x 240 in resolution), 1200mAh Li-ion battery (optional), and smart charger. Features: Analog bandwidth: 0 - 2MHz Sampling rate: 5Msps max Sensitivity: 2mV/Div - 20V/Div Sensitivity error: < 5% Timebase: 1us/Div - 50s/Div Record length: 512/1024 points Built-in test signal with multiple frequencies USB connection Ability to upload captured raw data as CSV file Battery/USB powered

Manufacturer: Probe Master Brand: Probe Master Model: 4904-3RA

Oscilloscope probe with readout actuator, 125MHz, 10X, 600V, 6.6ft, BASIC KIT