Motion, Speed & Force - Page 135

Manufacturer: Neewer

Manufacturer: Mark-10 Brand: Mark-10 Model: Series 2

Series 2 Economical Digital Force Gauge with #10-32 UNF Load Cell Thread, 20 lbF / 10 kgF / 100 N Series 2 digital force gauges are designed for basic tension and compression force testing applications. A backlit graphic LCD displays the current, peak tension, or peak compression reading. The gauges are overload protected to 150% of capacity. An ergonomic, reversible aluminum housing allows for hand held use or fixture mounting, rugged enough for applications in both production and laboratory environments. Series 2 gauges are directly compatible with Mark-10 test stands and grips. Includes: 9V battery Quick-start guide Resource CD Certificate of conformance Features: Calculates peak tension and compression values 3 selectable units of measurement Ultra-compact, ergonomic housing Configurable default measurement unit and mode 500 Hz sampling rate Large, backlit graphic display with auto-dimming Powered by 9V battery or available AC adapter Reversible housing for alternate load cell orientation Display Indicators: Force on Engineering: Reversible Housing

Manufacturer: NIDEC SHIMPO Brand: NIDEC SHIMPO

NIDEC SHIMPO DT-107A-S12 TACHOMETER, 0.10 TO 25,000RPM, ±0.006%

Manufacturer: COLE-PARMER Brand: Monarch Instrument

Sensor pack. Includes accelerometer 98834-74, magnetic base 98834-77, connecting stud 98834-81, and stinger 98834-84

Manufacturer: Checkline Brand: Checkline

The LS-5-UVKIT UV Strobe Conversion Kit for LS-5-12000 Stroboscope, Includes UV Lens and Flash Tube is a kit that includes a special UV Lens and flash tube needed to illuminate UV inks for inspection. After replacement of the standard lens and flash tube, this UV-Kit allows use of the LS-5-12000 Stroboscope to identify misprints, voids and similar defects when using UV activated inks and coatings at production speeds. The UV Kit can easily be removed and replaced with original components for conversion back to a standard xenon strobe as needed. Supplied in cardboard box with detailed installation instruction manual.

Manufacturer: Imada Brand: Imada

The FB-20 Mechanical Force Gauge, Capacity: 20 lbf is ideal for push / pull measurements in all environments. Its rugged construction and excellent accuracy make these force gauges ideal for tension and compression quality control measurements. Many ranges are offered, calibrated in Pounds, Kilograms, or Newtons.

Manufacturer: Ifm Brand: Ifm

Technical Specification Item Vibration Monitor Frequency Range (Hz) 10-1000 Temp. Range (F) -13 to176 Temp. Range (C) -25 to 80 Velocity 0-50mm/sec Bearing/Gear Check Yes Accuracy +/-3% Auto Power Off No Battery Type None Manufacturers Warranty Length 2 Years This listing is for each.

Manufacturer: Monarch Instrument Brand: Monarch Instrument Model: 6207-012

The Monarch 6206-012 Nova-Strobe battery-powered digital stroboscope has a xenon flash tube, a 30 to 10,000 flashes per minute (FPM) range, internal phase shifting, and continuous duty cycle. It is designed for motion analysis, preventive maintenance, printing inspection, harmonics analysis, and speed measurement of repetitive motion. The xenon flash tube has an auto-adjustable 8 to 20 microsecond flash duration to provide crisp images in brightly lit areas. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed. The stroboscope has a flash rate range of 30 to 10,000 FPM and a flash rate accuracy of 0.002% of setting or + or - least significant digit/0.01 for use in slow-to-medium speed applications. Built-in multiply-by-2 and divide-by-2 functionality allows the operator to distinguish true RPM from harmonics. Internal phase shift functionality allows the operator to manually rotate the target location clockwise or counterclockwise in 5 degree increments. The built-in 1/4" - 20 UNF (Unified Fine) thread mount and continuous duty cycle provides continuous use over the life of the battery without the need for cool-down periods. The stroboscope includes a 115/230V AC universal battery charger with interchangeable wall plugs and instructions. Stroboscopes are used in a variety of settings including manufacturing, printing, education, and photography. SpecificationsFlash rate range30 to 10,000 FPM/RPMFlash rate accuracy0.002% of setting or + or - least significant digit/0.01 FPMFlash duration8 to 20 microseconds/230mJoules up to 3450 FPMFlashtubeXenon with 100-million flash life spanAverage Power>13 W above 3450 FPMDisplay6-digit LCDDuty cycleEqual to the battery lifeFlash rate resolution1 FPMPower supplyInternal NiMH rechargeable battery with universal 115/230V rechargerDimensionsBody: 3.66 x 3.56 x 9"/93 x 90 x 229mmRefle...

Manufacturer: COLE-PARMER Brand: Mark-10

These digital force gauges are designed for basic tension and compression force testing applications up to 100 lb (500 N). The 500 Hz sampling rate and ±0.5% accuracy provide accurate peak and compression measurements. A backlit graphic LCD displays the current, peak tension, or peak compression reading. The gauges are overload protected to 150% of capacity and are designed with an ergonomic, reversible aluminum housing that allows for handheld use or fixture mounting. These gauges are rugged enough for applications in both production and laboratory environments, and provide additional measurement flexibility as all of the units are directly compatible with Mark-10 test stands and grips. Order the optional attachment kit to expand the gauges measurement capabilities based on your application requirements. What's Included: One 9 V battery. Basic solution for simple force measurement requirements Calculates peak tension and compression values Three selectable units of measurement Ultra-compact, ergonomic housing Configurable default measurement unit and mode 500 Hz sampling rate Large, backlit graphic display with auto-dimming Reversible housing for alternate load cell orientation

Manufacturer: Monarch Instrument Brand: Monarch Instrument Model: 6235-010

The Monarch 6235-010 PLS pocket LED stroboscope has internal and external modes, time delay, phase shift, and a NIST Certificate of Calibration, and provides inspection and speed measurement. It is designed for motion analysis, preventive maintenance, printing inspection, and speed measurement of repetitive motion. The 7-array LED light source has a light output of 1800 lumens at 6000 flashes per minute (FPM) eight inches from the lens. Adjustable flash duration of 0.1 to 18 degrees or 0.5 to 2500 microseconds. LED lights have a longer bulb life and require less energy than xenon flash tubes and can extend the battery life of battery-powered stroboscopes, have a lower heat output, and quieter operation when used in audio testing. The internal flash mode has a range of 30 to 300,000 FPM and 0.5 to 5,000 hertz (Hz) and has an accuracy of 0.005% of setting, or + or - last digit. The external flash mode has a range of 0 to 300,000 FPM, 0 to 5000 Hz and accuracy of + or - 0.005% of reading, or + or - last digit. A NIST Certificate of Calibration ensures accuracy. Built-in multiply-by-2 and divide-by-2 functionality allows the operator to distinguish true RPM from harmonics. Separate 3.5mm (1/8") transistor-transistor logic (TTL) input and output jacks provide power to remote sensors and allow multiple strobes to be daisy-chained to provide wider coverage. Tachometer mode, available for use while the stroboscope is in external mode, has a measuring range of 30 to 300,000 rpm (requires remote sensor, not included). Phase shift of 0.1 to 18 degrees of rotation and time delay of 0.5 to 2500 microseconds allow operator to manually adjust the focal point of the object to any point in the rotation without moving the trigger point. A continuous duty and integrated 1/4" - 20 UNF (Unified Fine) thread mount enables the stroboscope to be used continuously over the life of the battery. Five user-selectable flash rates can be programmed into the device and recalled after powering off. The stroboscope is powered by 3.6V DC interna...