|
|
-
3.6 of 5.0 with 15 Reviews
SALE PRICE: $576.96
Manufacturer: tereninstruments
Brand: tereninstruments
Manufacturer: tereninstruments
Brand: tereninstruments
|
We use DHL and Fedex. Generally, it only needs 3 days to arrive America from China. The lead time is about 1-3 business days. Pakage includes 2 sets of VM-6370. Applications: Used for measuring periodic motion, to check the imbalance and deflecting of moving machinery. Specifically designed for present measuring various mechanical vibration. So as to provide the data for the quality control, run time and equipment upkeep. Features: Specially designed for easy on site vibration measurement of all rotating machinery for quality control,commissioning, and predictive maintenance purposes. Wide frequency range (10Hz~10kHz) in acceleration mode. Can display the parameters of Displacement, Velocity and Acceleration simultaneously. General Specifications: Sensor: Piezoelectric Accelerometer Measuring Range: Acceleration: 0.1~400 m/s²; 0.3~1312 ft/s²; 0.0~40 g; Equivalent Peak Velocity: 0.01~400 mm/s; 0.004~16.0 inch/s; True RMS Displacement: 0.001~4.0 mm; 0.04~160.0 mil; Equivalent Peak-peak Frequency: 5 Hz ~ 1k Hz Frequency Range: Acceleration: 10 Hz ~ 10k Hz Velocity: 10 Hz ~ 1k Hz Displacement: 10 Hz ~ 1k Hz Accuracy: 5 % of Reading + 2 digits Metric / Imperial Conversion Analogue Output: AC Output 0~2.0 V Peak Full Scale (Load Resistance: Above 10k) Max. Value Hold Power Off: Manual Power Off or Auto Power Off Battery Indicator: Low Battery Indicator Data Output: USB, RS-232 Operating Conditions: Temperature: 0~50 degree Humidity:
-
3.6 of 5.0 with 9 Reviews
SALE PRICE: $590.00 1% OFF
Manufacturer: Mark-10
Brand: Mark-10
Model: Series R01
Manufacturer: Mark-10
Brand: Mark-10
Model: Series R01
Series R01 Plug Test technology. Features: Member of the Plug Test family of interchangeable sensors and indicators Measures tensile and compressive forces NIST-traceable certificate of calibration with data included Accuracy: 0.15% of full scale + indicator Warranty: 3 years
-
3.6 of 5.0 with 12 Reviews
SALE PRICE: $595.00
Manufacturer: Imada
Brand: Imada
Manufacturer: Imada
Brand: Imada
|
The DS2-4 Digital Force Gauge with Output, Cap. 4.4 lbf / 2 Kg / 20 N, 220V is a precision instrument that features a large, easy-to-read LCD display and simple push-button operation. An ergonomic metal housing protects the highly accurate loadcell and electronics in tough industrial environments.When measuring, units of measure and a tension or compression icon are displayed. A battery icon indicates the NI-MH batteries are low. If an overload occurs the display will flash to warn you. When measuring, units of measure and a tension or compression icon are displayed. A battery icon indicates the NI-MH batteries are low. If an overload occurs the display will flash to warn you. If desired, you can program high/low setpoints to enable Go/NoGo testing using the LCD indicators. Standard outputs (RS-232C, Digimatic, and 1VDC analog) enable you to acquire data for permanent record. All DS2 gauges can run on the internal NI-MH batteries or the AC adapter/charger. An optional handle to facilitate the measurement of heavy loads is also available.
-
3.6 of 5.0 with 15 Reviews
SALE PRICE: $595.00 1% OFF
Manufacturer: Mark-10
Brand: Mark-10
Manufacturer: Mark-10
Brand: Mark-10
|
The Mark-10 M3IA Force and Torque Indicator, 220V Australia Plug is designed to work with a wide range of Mark-10 remote force and torque sensors. With exclusive Plug & Test technology, all calibration and configuration data is saved within the sensors smart connector, not the indicator, allowing for true interchangeability. In addition, all sensors are fully compatible with the advanced 5i force / torque indicator. The 3i shares its menu structure and most specifications with Series 3 digital force gauges. The sampling rate is 2,000 Hz, producing accurate results under a wide range of test conditions. A backlit graphic LCD displays large characters, and a menu is available to access the gauges features and configurable parameters. The display also features an analog load bar for graphical representation of applied load, as well as set point indicators for pass-fail testing. USB output is provided for data collection purposes. The gauges include MESURTM Lite data acquisition software. MESURTM Lite tabulates continuous or single point data. One-click export to Excel allows for further data manipulation.
-
3.6 of 5.0 with 23 Reviews
SALE PRICE: $598.00
Manufacturer: AWS
Brand: AWS
Manufacturer: AWS
Brand: AWS
|
The AWS RDFA-600 600 Lb-ft Rundown Fixture 3/4 inch Drive is required for accurate torque measurement for power-driven torque controlled tools (electric, hydraulic or pneumatic). The RDF Joint Simulator are not necessary or useful when measuring torque on manually-operated torque tools (screw-drivers, wrenches, etc.) It simulates the conditions found when using the tool in real-world conditions, allowing the speed of the power tool motor to ramp-up to normal operating speeds resulting in a more accurate and repeatable measurement of the torque. The Joint Simulator is typically fabricated from machined steel with the appropriate drive size as needed. Internally it is comprised of a series of Belleville washers, designed to compress as the bolt tightens. By varying the arrangement of these washers, various joint rates can be simulated soft, medium and hard.Unless otherwise, specified, Joint Simulators are configured to simulate a medium joint. The joint rates can be adjusted by the user by changing the orientation of the Belleville washers upside down.
-
3.6 of 5.0 with 26 Reviews
SALE PRICE: $617.00 1% OFF
Manufacturer: Mark-10
Brand: Mark-10
Model: AC1036
Manufacturer: Mark-10
Brand: Mark-10
Model: AC1036
This calibration kit is designed to permit the field calibration of any Series CTA cap torque tester. The kit contains a complete set of attachments required to mount the tester to a bench, as well as the necessary brackets and cable to mount weights,
-
3.6 of 5.0 with 26 Reviews
SALE PRICE: $617.00 1% OFF
Manufacturer: Mark-10
Brand: Mark-10
Model: AC1036
Manufacturer: Mark-10
Brand: Mark-10
Model: AC1036
This calibration kit is designed to permit the field calibration of any Series CTA cap torque tester. The kit contains a complete set of attachments required to mount the tester to a bench, as well as the necessary brackets and cable to mount weights,
-
3.6 of 5.0 with 32 Reviews
SALE PRICE: $620.00 1% OFF
Manufacturer: MONARCH INSTRUMENTS
Brand: Monarch Instruments
Model: PLT200KIT-MONARCH INSTRUMENTS
Manufacturer: MONARCH INSTRUMENTS
Brand: Monarch Instruments
Model: PLT200KIT-MONARCH INSTRUMENTS
MONARCH INSTRUMENTS PLT200KIT LASER TACHOMETER KIT, PLT200
-
3.6 of 5.0 with 27 Reviews
SALE PRICE: $657.98 1% OFF
Manufacturer: Mountz
Brand: Mountz
Manufacturer: Mountz
Brand: Mountz
Mountz CS 50 Torque Sensor (5 - 50 N.m)
-
3.6 of 5.0 with 8 Reviews
SALE PRICE: $661.20 1% OFF
Manufacturer: COLE-PARMER
Brand: Shimpo
Model: FG-7008
Manufacturer: COLE-PARMER
Brand: Shimpo
Model: FG-7008
|
Versatile gauge provides fast sampling results and great accuracy with a 1000 Hz sampling rate and ±0.2% accuracy full-scale. Internal memory of 1000 data points can be separated into groups allowing multiple tests to be recorded without interruption. Free data logging and graphing software can be used to transfer results to a PC for storage or further analysis, and set the gauge sampling rate from 0 to 60 readings per second. Additional features include high/low set points with audible and visual alarms, and a comparator output for production line integration. Gauge has three operation modes: track, peak, and auto peak. Track mode is for real-time readings. Peak mode is for displaying the peak reading, which will display until a higher reading is measured. Auto peak mode is similar to peak mode, but the display will reset after a programmed time period. Gauge body is ergonomically designed for handheld use, and made of aluminum for rugged use in a test stand. Display auto-rotates 180° to be easily seen from either position. Large, backlit display auto-rotates 180° to be easily read from either position. Plus the compression/tension icons and dual-labeled keypad allow for instant switching from push to pull testing for portable or test stand operation. What's Included: six tip attachments (hook, flat, conical, chisel, notched, and tip extension shaft), USB cable, padded carrying case, rechargeable 3.6V NiMH batteries, AC adapter/charger, and calibration document provided by the manufacturer. Free software available via download. Use as a portable gauge or mount on a test stand-the display automatically rotates 180° for easy reading in either position Measure tension and compression in three modes: track, peak, or auto-peak Integrate gauge into a quality system using the comparator output for repetitive pass/fail results Simple data logging at the push of a button or set for continuous data storage Log data to a computer, or optional printer, with the
|
|