Motion, Speed & Force - Page 53

Manufacturer: COLE-PARMER Brand: Electromatic Equipment

This pocket tachometer measures both contact and noncontact readings. Laser allows noncontact measurement up to 60" (152.4 cm) away. Select from 10 measurements including min/max and final. Also features 14 memory points, overrange indicator, one-second display update, and low-battery indicator. What's Included: storage case, master wheel, funnel adapter, cone adapter, contact adapter, reflective tape, three AA batteries, and calibration document supplied by the manufacturer. Compact size allows use in hard to reach areas Pocket design has sharp laser beam for easy targeting

Manufacturer: Loos & Co Brand: Loos & Co.

The Loos Cableware inch tension gauge measures the tension in cables to check for proper setup in sail rigging and supporting cables for large tents, radio towers, and other structures. This analog gauge shows present tension in pounds (lb.) and has a measurement accuracy of + or - 5 percent. The gauge shows readings on a graduated scale, and a calibration table on the unit converts a scale reading to the corresponding present tension and percentage breaking strength of the rope, based on 302/304 1 x 19 stainless-steel wire rope. The gauge can remain hooked on the wire during testing while the tension is adjusted. The Loos Cableware metric tension gauge has an anodized aluminum body that resists corrosion and wear. A 1/4" hole on the gauge's body allows a lanyard or hook to be attached to the gauge for securing it to the cable.Force gauges, also called push-pull gauges or tension gauges, measure the tensile (pull) or compression (push) force applied to an object. They are used to test the strength and functionality of a variety of machines, electronic components, cables, wires, and consumer products in scientific, medical, automotive, quality assurance, and manufacturing applications. A digital force gauge shows the amount of force in digits on the gauge's display. Response time varies among digital force gauges depending on the speed of the processor. An analog (or mechanical) force gauge shows measurements on a calibrated dial. Analog force gauges are not as precise as digital force gauges, but they provide instantaneous measurements and can be used in a wider range of environmental conditions than digital force gauges. Hooks, compression plates, levers, handles, test stands, and other accessories can be used with the gauge for taking measurements on objects with a range of shapes and sizes.Loos & Co. manufactures aircraft cable and wire rope and related measurement tools. The company, founded in 1958 and headquartered in Pomfret, CT, meets International Organization for Standardization (ISO) standard 9001.What...

Manufacturer: Frank W Murphy Brand: FRANK W. MURPHY

Frank W Murphy Vs94-R24 Shock And Vibration Control Switch

Manufacturer: COLE-PARMER Brand: Cole-Parmer

Select the LCD model for use in bright light or the LED model for easy reading in dim light. A laser spot makes these tachometers easy to aim. Use the memory button to recall last, maximum, minimum, and ten stored readings. Tachometers feature an overrange indicator and low battery indicator. What's Included: contact adapter, two convex rubber cone tips and one concave rubber tip to convert the laser tachometer to a contact model, a 3 1/2'' (8.9 cm) extraction shaft, a 7'' x 1'' (17.8 x 2.5 cm) piece of reflective tape, two AA batteries, NIST-traceable calibration report supplied by the manufacturer, and carrying case. Rugged aluminum construction - ideal for industrial applications Stores up to 13 readings Accurately measure rpm from up to 14 (4.2 m) away!

Manufacturer: Checkline Brand: Checkline Model: TA-30

Torque tools which are in regular use need periodic checks to insure their accuracy. The TA-Series bench mounted torque analyzers are built for this purpose. These analyzers provide a means of quick and economical standardization. For use with hand operated tools only. Not for use with pneumatic or electric powered tools.

Manufacturer: Multiquip Brand: Multiquip Model: 35-369

Multiquip EM23101 assembly air powered screen Vibrator. Concrete mixing will be smoother. Rocks that are too massive for pumping will be filtered out by the vibrating screen. Aggregate will be dropped through without manual effort. Important and necessary part of any concrete pump. Fits perfectly onto pump.

Manufacturer: Nova Strobe Model: bax

A powerful digital strobe light that has a flash rate that is fully adjustable between 1.7 and 133 flashes per second. Its flash rate meter is accurate to within  ± 2%. Lightweight and bright, these strobes are comfortable to hold and will operate continuously with no danger of overheating. 110V 60hz AC.

Manufacturer: YIBIAO Brand: LINGZHUANG

Vintage cars modified instrument speedometer stopwatch small round table kkyb0003 (36347275857) (63204465)

Manufacturer: Mark-10 Brand: Mark-10

0 - 1 Adjustable Dual Roller Grip This cam grip secures the ends of tubing, cables, and odd shaped samples for pull testing applications. Engaging and disengaging samples is quick and easy, with a side slot for sample insertion and serrated steel rollers. The rollers can be repositioned to the desired spacing, accommodating a broad range of sample widths up to 1 (25 mm).

Manufacturer: Shimpo Brand: Shimpo Model: MF-50KG

The Shimpo MF series peak-hold analog force gauge measures tensile (pull) or compression (push) forces in quality control and process control applications. This analog dial gauge shows measurements in kilograms (kg) and can display the present force measured in real time or the maximum (peak) force measured over the course of a test. It has a measurement accuracy of + or - 0.2 percent of full scale. The gauge has an overload capacity of 75 kg. A push button on the gauge resets the peak reading for repetitive testing applications. The gauge comes with one hook, one chisel, one flat head, one notched head, one cone head, one large hook, and one large V-hook attachment that screw onto the sensor shaft for conducting tests on a variety of devices. It also comes with an extension rod for increasing the reach of the gauge's sensor. The gauge's body is constructed from die-cast aluminum, which resists wear. The meter measures 9.06 x 2.36 x 2.05 inches (230 x 60 x 52 mm, H x W x D, where H is height, the vertical distance from lowest to highest point; W is the width, the horizontal distance from left to right; and D is depth, the horizontal distance from front to back) and can be held in one hand during use. It comes with a carrying case that helps protect the gauge during transport and storage.Force gauges, also called push-pull gauges or tension gauges, measure the tensile (pull) or compression (push) force applied to an object. They are used to test the strength and functionality of a variety of machines, electronic components, cables, wires, and consumer products in scientific, medical, automotive, quality assurance, and manufacturing applications. A digital force gauge shows the amount of force in digits on the gauge's display. Response time varies among digital force gauges depending on the speed of the processor. An analog (or mechanical) force gauge shows measurements on a calibrated dial. Analog force gauges are not as precise as digital force gauges, but they provide instantaneous measurements and can be used i...