Motion, Speed & Force - Page 55

Manufacturer: Kanomax Brand: Kanomax Model: ACNA-0116

Kanomax data processing software for model 4200 vibration meter .

Manufacturer: Kanomax Brand: Kanomax Model: ACNA-0116

Kanomax data processing software for model 4200 vibration meter .

Manufacturer: Shimpo Brand: Shimpo Model: DT-311A-230V

The Shimpo DT-311A-230V line-powered digital stroboscope has a xenon flash tube, internal and external trigger modes, and time and phase shift to provide stop-motion or slow-motion viewing of moving machinery. It is used for motion analysis, preventive maintenance, printing inspection, and speed measurement of repetitive motion. The xenon flash tube has a 10 to 40 microsecond flash duration for crisp images in brightly lit areas and a flash timer conserves flash tube life. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed. A high-polish focused reflector eliminates blind viewing areas. Internal and external trigger modes have a 0 to 35,000 flashes per minute (FPM) range and an accuracy of + or - 0.01%, or + or - 1 digit. Built-in multiply-by-2 and divide-by-2 functionality allows the operator to distinguish true RPM from harmonics. Internal mode phase shift has a 360 degree range in six seconds. External mode has a phase shift range of 0 to 360 degrees in one-degree increments and a time delay of 0 to 2,000 milliseconds (msec) at speeds between 40 and 10,000 FPM. Time delay and phase shift enable the operator to adjust the focal point of the object to any point in the rotation without moving the trigger point. Synchronous output enables the stroboscope to drive other strobes for wider coverage. The stroboscope has an integrated mounting thread, continuous duty cycle, and 230V AC line power which allow for permanent installation and long-term use without the need for cool-down periods. The aluminum housing provides durability. The stroboscope includes a flash tube removal tool, a handle, and instructions. Stroboscopes are used in a variety of settings including manufacturing, printing, education, and photography.SpecificationsFlash range and accuracy (internal mode)40.0 to 35,000 FPM, with + or - 0.01% of reading acc...

Manufacturer: Mark-10 Brand: Mark-10 Model: Series 2

Series 2 digital force gauges are designed for basic tension and compression force testing applications up to 200 lbF (1,000 N). Peak tension and compression readings are reliably captured via the gauges 0.5% accuracy and 500 Hz sampling rate. A backlit graphic LCD displays the current, peak tension, or peak compression reading. The gauges are overload protected to 150% of capacity. An ergonomic, reversible aluminum housing allows for hand held use or fixture mounting, rugged enough for applications in both production and laboratory environments. Series 2 gauges are directly compatible with Mark-10 test stands and grips. Includes Economical Digital Force Gauge 9V battery Quick-start guide Resource CD Certificate of conformance Features Calculates peak tension and compression values 3 selectable units of measurement Ultra-compact, ergonomic housing Configurable default measurement unit and mode 500 Hz sampling rate Large, backlit graphic display with auto-dimming Powered by 9V battery or available AC adapter Reversible housing for alternate load cell orientation Display Indicators Force on Engineering: Reversible Housing

Manufacturer: Mark-10 Brand: Mark-10

Basic Force / Torque Indicator, 110V The 3i digital force / torque indicator is designed to work with a wide range of Mark-10 remote force and torque sensors. With exclusive Plug Test technology, all calibration and configuration data is saved within the sensor's smart connector, not the indicator, allowing for true interchangeability. In addition, all sensors are fully compatible with other Mark-10 indicators. Includes: Carrying case Universal voltage AC adapter Battery Quick-start guide USB cable Resource CD (USB driver, MESUR Lite software, MESUR gauge DEMO software, and user's guide) Certificate of conformance. Features: Interchangeable force and torque sensors through Plug Test technology (sensors are sold separately) High-speed 2,000 Hz sampling rate Ultra-compact size Large backlit graphic display Programmable set points with pass/fail indicators Live load bar graph with set point markers Peak readings and set points always displayed Configurable audio alarms and key tones Programmable auto-shutoff Configurable audio alarms and key tones Battery or AC operation MESUR Lite data collection software included CE mark

Manufacturer: Mark-10 Brand: Mark-10 Model: Series R01

Series R01 Plug Test technology. Features: Member of the Plug Test family of interchangeable sensors and indicators Measures tensile and compressive forces NIST-traceable certificate of calibration with data included Accuracy: 0.15% of full scale + indicator Warranty: 3 years

Manufacturer: Shimpo Brand: Shimpo

The FGE-100X FGE Hand-held Digital Force Gauge, Cap. 100 lbf / 50 Kg / 500 N, Complete Kit, 220V is a microprocessor-controlled force gauge that precisely measure push/pull forces up to 100 pounds with an accuracy of 0.2%. They are extremely compact for convenient hand-held use and include provisions for mounting on a test stand for bench top use.

Manufacturer: COLE-PARMER Brand: J.H. Williams Tool Group

The COMPUTORQ3 Electronic Torque Wrench is a simple to use digital readout wrench that displays real time torque values in any of four torque units, ft. lbs., in. lbs., Nm, kg. cm. Simply set the desired torque value and apply force until the green LED illuminates. Great for light industrial, automotive, motorcycle, watercraft, and aircraft applications. * Sleek new design * 15 degree flex ratchet in head * Push button socket release head * Large, easy to read digital display * Long battery life, uses two each CR123 lithium batteries * Torques in both clockwise and counterclockwise directions * Battery saving auto-shutoff after two minutes * COMPUTORQ3 remembers last unit and torque setting selected * 3 color LED light bar * When desired torque value is reached, display will hold value and Ergonomically designed molded non-slip rubber grip

Manufacturer: Cole-Parmer Brand: Monarch Instrument Model: 6203-012

These stroboscopes feature a pistol-grip handle with a latching trigger and a 1/4–20 threaded bushing for extended “hands-free” tripod mounting. High flash energy allows measurements in bright areas. Select standard or phase—shifting models according to your application. Standard Digital Stroboscopes feature an LCD readout of flashes per minute (fpm), x2 and ÷2 capacity for distinguishing actual rpm from harmonic frequencies, a memory for six flash rates, a recall function for last flash rate, and an external input and trigger output for remote synchronous operation. What’s Included: a 6-ft (1.8-m) power cord (115 VAC models include plug only) (115/230 models include battery recharger), and an NIST-traceable calibration report supplied by the manufacturer. Phase shifting models let you use your stroboscopes continuously View different parts of moving machinery.

Manufacturer: Cole-Parmer Brand: Monarch Instrument Model: 6204-012

These stroboscopes feature a pistol-grip handle with a latching trigger and a 1/4–20 threaded bushing for extended “hands-free” tripod mounting. High flash energy allows measurements in bright areas. Select standard or phase—shifting models according to your application. Phase-Shifting Stroboscope shifts in .1° increments — view different parts of moving machinery with higher resolution and accuracy. Adjust readings by as little as 0.01 fpm. Store and recall nine full flash rate settings in non-volatile memory—unit remembers last setting before shutoff. Set stroboscope for internal mode or external mode (input signal from TTL to 24 V). External mode features two delay functions—phase angle delay and time delay with resolution to 0.1° and 0.00001 seconds. What’s Included: a 6-ft (1.8-m) power cord (115 VAC models include plug only) (115/230 models include battery recharger), and an NIST-traceable calibration report supplied by the manufacturer. Phase shifting models let you use your stroboscopes continuously View different parts of moving machinery.