Pressure & Vacuum Gauges - Page 192

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: ASA-6-000-R

Accuvac Technology ASA Flanges are Precision machined from Crossed Forged SS304 Stainless Steel Plate with Surface finish of 32 Micro-inch or better. These flanges can be baked to 200 Deg C and have a Vacuum Range of up to 10 to -8 Torr. Some of the Applications are Vacuum Chambers, Manifolds, Valves, Pumps, Viewports and Variety of Experimental Devices.

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument Model: 106-FE-00-OO

Mid-West Instrument bellows type differential pressure gauge. Model 106 System pressure is applied to the internal volume of a bellows and mechanical linkage assembly. As pressure changes, the bellows and linkage assembly move to cause an electrical signal to be produced or to cause a gauge pointer to move. The major components are a two-piece body, multiple diaphragm/bellows sensing element and over-pressure assembly, a torque tube assembly, a range spring and the gauge front assembly. The body halves provide the pressure containment function. They also clamp the sensing element and over-pressure assembly between the halves, isolating the high side and low side pressures of the system. The high side body half also provides a mount for the torque tube assembly and the gauge front assembly. Model 106 assembly incorporates a bi-directional relief valve which provides over-pressure protection in both directions. When over-pressured from the high side, the valve is opened by a mechanical stop as the sensing element deflects to its maximum travel. When over-pressured from the low side, the spring-loaded valve opens when the differential pressure exceeds its maximum rating. The opening of the valve in either direction equalizes the pressure and protects the unit. Aluminum body material. Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT top and bottom connections, 6-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-1 percent full scale (ascending). Shatter resistant acrylic lens.

Manufacturer: CME Brand: CME Tools

MADE OF STAINLESS STEEL. DISPLAY UP TO 12". * Stainless twin column structure. * Erro-proof digital counter comes with zero reset button. * 0.001" GRADUATION ON INDICATOR FOR FINE READINGS. * Large size feed wheel lock and fine adjustment on measuring slider. * Carbide Tipped Scriber. * Ground and Micro-Lapped Base. * QUESTIONS? E-MAIL: [email protected] Tel: 1-800-254-0007 Cel#:248-207-9813

Manufacturer: Winters Brand: Winters

PPC Standard Process Gauges are used where operator safety is a must. Applications are suited for the chemical and petroleum industry where chemical compatibility and contamination is a concern. PPC Add-On Options Features: StabiliZR"¢ dampened movement minimizes effects of pulsation and vibration without liquid filling Solid phenolic front and polypropylene pressure relief back safety case ±0.5% accuracy Stainless steel full rotary movement Micrometer pointer for ease in calibration Under and overload stops 316L stainless steel or brass wetted parts standard Restrictor screws standard on dual scale (optional on single scale gauges) ASME B40.100 compliant RoHS compliant (SS and Monel internals only) CRN registered 5 year warranty Made in Canada

Manufacturer: Winters Brand: Winters

PPC Standard Process Gauges are used where operator safety is a must. Applications are suited for process, chemical and petroleum industries especially with highly corrosive media. PPC Add-On Options Features: Solid phenolic front and polypropylene pressure relief back safety case Field liquid-fillable (bottom|Connection only) ±0.5% accuracy Stainless steel full rotary movement for longer life Micrometer pointer for ease in calibration Under and overload stops 316L stainless steel, brass or Monel wetted parts Restricted orifice standard on dual scale (optional on single scale) ASME B40.100 compliant RoHS compliant (SS and Monel internals only) CRN registered 5 year warranty Made in Canada

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 9832275

The WIKA industrial pressure gauge has stainless steel wetted parts, which resist corrosion against chloride samples, and has a circular dial that is enclosed in a stainless steel case that resists corrosion. The gauge measures pressure from 15 pounds per square inch (psi) to 15,000 psi, and is accurate to a variety of percentages across the entire range of the gauge, depending on other standard features, such as dial size. Accuracy ranges are: + or - 2.5 percent of span; + or - 1 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) B40.100 Grade 1A accuracy class; or + or - 2/1/2 percent of span over the entire range of the gauge, or ASME Grade A accuracy class. The male connection is available as a lower mount, a lower back mount, or a center mount, and comes with a choice of a 1/8", 1/4", or a 1/2" National Pipe Thread (NPT) rate. This pressure gauge is suitable for use in corrosive environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying...

Manufacturer: CME Tools Brand: CME Tools

Manufacturer: CME Brand: CME Tools

DESCRIPTION: "CNC Tooling" Brands---The Best Quality on The Market---Sold Many Thousands to Distributors to put on famous labels. *This set including: 3 pcs BT40-E25 collet chucks, 100mm gage length Precision Dynamic Balanced to G2.5/25000RPM Super high speed tool holder. 0.0001" Runout Free shipping in USA mainland. Total: 3 Chucks. PART# B25-BT40-ER25L Large Inventory ! Same Day Shipping !

Manufacturer: Dwyer Instruments Brand: Dwyer Model: DPGWB-11

The Series DPGW is the only economic digital pressure gage for liquids with the ability to select engineering units on the market. With its 1% accuracy and digital push-button zero, the DPGW is the perfect choice for digitally monitoring the pressures of air and compatible liquids and gases.

Manufacturer: REOTEMP Instrument Brand: REOTEMP Model: SG25ATC15P21

Reotemp’s sanitary pressure gauges are specially designed to meet the demanding sanitary requirements of the brew industry. The quick connecting Tri-clamp design allows for fast removal and installation of instruments. Ideal for clean-in-place applications or equipment washdowns. The SG series is designed to meet 3-A sanitary standards. All welded 316 stainless steel tube, socket, seal, and diaphragm. Accuracy: standard seal: 1.5 percent for ranges 100 psi and above 2 percent for compound and below 100 psi ranges. Fractional seal: ranges 60 psi and above 2.5 percent up scale, up to 4 percent downscale. Made in the USA.