|
|
-
4.1 of 5.0 with 11 Reviews
SALE PRICE: $190.98
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 475-00-FM
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 475-00-FM
|
The Dwyer Series 475 Mark III intrinsically-safe digital manometer provides positive, negative, and differential pressure measurements, and is used to perform field calibration, monitoring or troubleshooting HVAC systems, performing clean room inspections, air velocity monitoring, and natural gas appliance-line testing. The meter is FM-approved intrinsically safe for Class 1, Div. 1, Group A, B, C, D, T4 hazardous locations. It has an accuracy of + or - 0.5% of full scale at 60 to 78 degrees F, and + or - 1.5% full scale at 32 to 60 and 78 to 104 degrees F. The extruded aluminum case provides durability. The backlit four-digit LCD displays the pressure measurement. The zero function nulls minor pressure differences before measuring. Standard connections accept 1/8" or 3/16" inside diameter (ID) vinyl or rubber tubing. The meter is powered by a 9V battery (included) and automatically shuts off after 20 minutes to preserve battery life. SpecificationsPressure typesPositive, negative, and differentialMedia typeAir and compatible combustible gasesCase materialExtruded aluminumDisplayFour-digit LCDTemperature limits0 to 140 degrees F/-17.8 to +60 degrees CCompensated temperature limits32 to 104 degrees F/0 to 40 degrees CDimensions6-17/32 x 2-13/16 x 29/32 (H x W x D)Power9V alkaline batteryAgency approvalsCE, FMH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Manometers measure the pressure of a liquid or gas. They are used in laboratory, medical equipment, engineering, automotive, and heating, ventilation, and air-conditioning applications. Manometers measure any combination of gauge, absolute, or differential pressures. Gauge pressure is the amount of pressure in a system relative to the ambient pressure, absolute pressure is the amount of pressure in a system relative to an absolute vacuum, and differential pressure is the difference between two pressures. Analog manometers are compose...
-
4.1 of 5.0 with 15 Reviews
SALE PRICE: $191.11 27% OFF
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 140-AA-00-OO
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 140-AA-00-OO
|
Mid-West Instrument diaphragm type differential pressure gauge. Weather resistant construction standard. Over range protection to full rated working pressure. Shatter resistant acrylic lens. Ideally suited for use on dissimilar fluids and wet gas or fluids with a high concentration of solids. Five year limited warranty. Total separation of high and low pressures by a Convoluted Elastomer Diaphragm. Sensor magnetically coupled to the indicating pointer and optional switches. Common applications: filter/strainer monitoring, compressed air, hydraulic, refrigerant, pump performance testing, heat exchanger pressure drop monitoring, water treatment applications, tank level monitoring horizontal or vertical, flow monitoring and balancing. Two times rated working pressure at ambient temperature. Aluminum body material. 316 Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT back connections, 2-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-2 percent full scale (ascending). Teflon guide bushings.
-
4.1 of 5.0 with 12 Reviews
SALE PRICE: $196.40 1% OFF
Manufacturer: Parker Hannifin
Brand: Parker Hannifin
Model: 06A12B13A2BC
Manufacturer: Parker Hannifin
Brand: Parker Hannifin
Model: 06A12B13A2BC
|
Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.
-
4.1 of 5.0 with 48 Reviews
SALE PRICE: $197.83 1% OFF
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 4390616
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 4390616
|
The WIKA differential pressure gauge has stainless steel 316L wetted parts which resist corrosion against chloride, and a dial that is enclosed in a thermoplastic case for increased durability in low temperature environments. The gauge measures pressure up to 100 pounds per square inch differential (psid) and 400 inches of water (inH2O), and is accurate to + or - 2 percent of span over the entire range of the gauge. The female connection is mounted on the back of the gauge and has a 1/4" National Pipe Thread (NPT) rate. This pressure gauge is suitable for use in applications that require measuring high differential and static process pressures. Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.WIKA Instrument Corporation is a global manufacturer of pressure and temperature measurement instruments, including pressure gauges, diaphragm seals, pressure transmitters, and thermometers, that meet International Organization for Standardization (ISO) standards for ...
-
4.1 of 5.0 with 14 Reviews
SALE PRICE: $200.76 1% OFF
Manufacturer: Reotemp
Brand: REOTEMP
Manufacturer: Reotemp
Brand: REOTEMP
Reotemp SG40ATC20P21 Pressure Gauge SS 0-300PSI, Liquid Filled Sanitary Fitting Stem Size: 2 (2.48")
-
4.1 of 5.0 with 34 Reviews
SALE PRICE: $202.58 5% OFF
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 121-AA-00-O(EA)
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 121-AA-00-O(EA)
Mid-West Instrument piston type differential pressure gauge. Over-range protection to maximum pressure. Weather resistant construction standard. Shatter resistant acrylic lens. A low cost differential pressure gauge for use in measuring the pressure drop across filters, strainers, separators, valves, pumps, chillers, etc., and for local flow indication and control. Proof pressure: two times rated working pressure at ambient temperature. Aluminum body material. Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT back connections, 2-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-2 percent full scale (ascending). One switch in general purpose enclosure, division 2 hazardous locations (1) (2). SPDT 3W, 0.25 Amp, 125 VAC/VDC (standard) (switch adjustable range of 15-95 percent).
-
4.1 of 5.0 with 45 Reviews
SALE PRICE: $205.07 1% OFF
Manufacturer: Ashcroft
Brand: Ashcroft
Manufacturer: Ashcroft
Brand: Ashcroft
Technical Specification Item Pressure Gauge Gauge Type General Purpose Dial Size 2-1/2 Range 0 to 2000 psi Connection Size 1/4 NPT Connection Location Lower Smallest Graduation 20 psi Graduations 200 psi Accuracy +/-1.5% Case Material 304 Stainless Steel Case Color Silver Socket Material 316 Stainless Steel Tube Material 316 Stainless Steel Filled With Glycerin Lens Material Polycarbonate Ring Material 304 Stainless Steel Operating Temp. Range -20 Degrees to 150 Degrees F Characteristics Power Flex Movement Series 1009SWL Manufacturers Warranty Length 5 yr. Compliance and Restrictions This item is restricted for international sale. This listing is for each.
-
4.1 of 5.0 with 37 Reviews
SALE PRICE: $209.21 1% OFF
Manufacturer: Winters
Brand: Winters
Model: PFP1064
Manufacturer: Winters
Brand: Winters
Model: PFP1064
|
The Winters PFP series pressure gauge with stainless steel 316 wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case and a 1/4" NPT male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1% or 1.5%. The stainless steel 316 wetted parts provide corrosion resistance. The socket for the 2.5" and 4" gauges is one-piece welded for strength. The stainless steel 304 case is corrosion resistant and Ingress Protection certified IP66 for protection against solid objects, including dust or liquids, and is appropriate for outdoor and severe ambient and process conditions. The circular dial comes in 2.5" (63 mm), 4" (100 mm), and 6" (150 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer, and the lens is polycarbonate for high impact resistance. The pointer for the 4" and 6" gauges is micrometer adjustable for ease of calibration. The gauge measures pressure with either a single scale in psi or Hg. vacuum, or a dual scale of either psi/kPa or Hg. vacuum/kPa. The 2.5" gauge is accurate to + or - 1.5% of full scale value. The 4" and 6" gauge are accurate to + or - 1% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 1A accuracy class. The male connection has a 1/4" NPT (National Pipe Thread) rate and comes with a bottom, lower back, or center back mount. The bourdon tube is drawn seamless stainless steel 316 for additional strength, the movement is stainless steel 304, and the welding is tungsten inert gas (TIG) for strength. The socket gasket, fill plug, and lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 30% for pressures up to 600 psi (4,147 kPa) and 15% for pressures over 600 psi (4,147 kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). ...
-
4.1 of 5.0 with 25 Reviews
SALE PRICE: $210.42 1% OFF
Manufacturer: Ames True Temper
Brand: Ames True Temper
Manufacturer: Ames True Temper
Brand: Ames True Temper
Technical Specification Item Pressure Gauge Gauge Type With Seal Dial Size 2-1/2 Range 0 to 30 psi Connection Size 1/2 FNPT Connection Location Bottom Smallest Graduation 0.5 psi Graduations 5 psi Accuracy +/-1.60% Case Material 304 Stainless Steel Case Color Silver Socket Material 316 Stainless Steel Tube Material 316 Stainless Steel Filled With Glycerin Lens Material Plastic Ring Material Polished Stainless Steel Operating Temp. Range -30 Degrees to 200 Degrees F For Use With Thick or Corrosive Medias Compatible with 316 Stainless Steel Includes Mini Diaphragm Seal Manufacturers Warranty Length 1 yr. This listing is for each.
-
4.1 of 5.0 with 12 Reviews
SALE PRICE: $214.32 1% OFF
Manufacturer: Winters
Brand: Winters
Model: PFP1083
Manufacturer: Winters
Brand: Winters
Model: PFP1083
|
The Winters PFP series pressure gauge with stainless steel 316 wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case and a 1/4" NPT male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1% or 1.5%. The stainless steel 316 wetted parts provide corrosion resistance. The socket for the 2.5" and 4" gauges is one-piece welded for strength. The stainless steel 304 case is corrosion resistant and Ingress Protection certified IP66 for protection against solid objects, including dust or liquids, and is appropriate for outdoor and severe ambient and process conditions. The circular dial comes in 2.5" (63 mm), 4" (100 mm), and 6" (150 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer, and the lens is polycarbonate for high impact resistance. The pointer for the 4" and 6" gauges is micrometer adjustable for ease of calibration. The gauge measures pressure with either a single scale in psi or Hg. vacuum, or a dual scale of either psi/kPa or Hg. vacuum/kPa. The 2.5" gauge is accurate to + or - 1.5% of full scale value. The 4" and 6" gauge are accurate to + or - 1% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 1A accuracy class. The male connection has a 1/4" NPT (National Pipe Thread) rate and comes with a bottom, lower back, or center back mount. The bourdon tube is drawn seamless stainless steel 316 for additional strength, the movement is stainless steel 304, and the welding is tungsten inert gas (TIG) for strength. The socket gasket, fill plug, and lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 30% for pressures up to 600 psi (4,147 kPa) and 15% for pressures over 600 psi (4,147 kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). ...
|
|