Pressure & Vacuum Gauges - Page 196

Manufacturer: Winters Brand: Winters

PFP Premium Industrial Gauges are excellent for severe ambient and process conditions where harmful vibration and pulsation are present. Their applications include hydraulic equipment, pressure washers, oil field equipment, pumps, compressors and process systems. PFP Add-On Options Features: Liquid filled stainless steel case protects against vibration and pulsation Bayonet ring Highly accurate Back, bottom, or panel mounted Under and overload stops Ventable plug on 2.5€ to 4.5€ stainless steel and 4.5" brass bottom mount and 4" stainless steel back mount gauges Stainless steel or brass wetted parts Restrictor screw standard on dual scale (optional on single scale) Dry case available ASME B40.100 compliant (EN837-1 available) RoHS compliant (SS internals only) CRN registered 5 year warranty Made in Canada

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 475-0-FM

The Dwyer Series 475 Mark III intrinsically-safe digital manometer provides positive, negative, and differential pressure measurements, and is used to perform field calibration, monitoring or troubleshooting HVAC systems, performing clean room inspections, air velocity monitoring, and natural gas appliance-line testing. The meter is FM-approved intrinsically safe for Class 1, Div. 1, Group A, B, C, D, T4 hazardous locations. It has an accuracy of + or - 0.5% of full scale at 60 to 78 degrees F, and + or - 1.5% full scale at 32 to 60 and 78 to 104 degrees F. The extruded aluminum case provides durability. The backlit four-digit LCD displays the pressure measurement. The zero function nulls minor pressure differences before measuring. Standard connections accept 1/8" or 3/16" inside diameter (ID) vinyl or rubber tubing. The meter is powered by a 9V battery (included) and automatically shuts off after 20 minutes to preserve battery life. SpecificationsPressure typesPositive, negative, and differentialMedia typeAir and compatible combustible gasesCase materialExtruded aluminumDisplayFour-digit LCDTemperature limits0 to 140 degrees F/-17.8 to +60 degrees CCompensated temperature limits32 to 104 degrees F/0 to 40 degrees CDimensions6-17/32 x 2-13/16 x 29/32 (H x W x D)Power9V alkaline batteryAgency approvalsCE, FMH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Manometers measure the pressure of a liquid or gas. They are used in laboratory, medical equipment, engineering, automotive, and heating, ventilation, and air-conditioning applications. Manometers measure any combination of gauge, absolute, or differential pressures. Gauge pressure is the amount of pressure in a system relative to the ambient pressure, absolute pressure is the amount of pressure in a system relative to an absolute vacuum, and differential pressure is the difference between two pressures. Analog manometers are compose...

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument Model: 142-SC-00-OO

Mid-West Instrument diaphragm type differential pressure gauge. Weather resistant construction standard. Over range protection to full rated working pressure. Shatter resistant acrylic lens. Ideally suited for use on dissimilar fluids and wet gas or fluids with a high concentration of solids. Five year limited warranty. Total separation of high and low pressures by a Convoluted Elastomer Diaphragm. Sensor magnetically coupled to the indicating pointer and optional switches. Common applications: filter/strainer monitoring, compressed air, hydraulic, refrigerant, pump performance testing, heat exchanger pressure drop monitoring, water treatment applications, tank level monitoring horizontal or vertical, flow monitoring and balancing. Two times rated working pressure at ambient temperature. 316 Stainless steel body material. 316 Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT back connections, 4-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-2 percent full scale (ascending). Teflon guide bushings.

Manufacturer: Fluke Brand: Fluke Model: FLK-A3000 FC

' Wireless Clamp Meter Module, Digital, Clamp Meter Jaw Style Clamp On, Max. AC Amps 400, Jaw Capacity 1-11/32 In., Counts 6000, Battery Type AA, Safety Rating CAT III 600V, Calibration Certificate Available Separately, AC Response TRMS, Audible Continuity No, Diode Test No, Memory Max/Min/Avg, Peak Hold No, Bar Graph No , Display LCD, Includes Batteries, Quick Start Guide Only '

Manufacturer: Parker Hannifin Brand: Parker Hannifin Model: 07E2EZ17AC

Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 4150

The Dwyer Capsuhelic series 4000 differential pressure gauge with an aluminum case has a circular 4" (100 mm) dial, and four female 1/4" NPT rate connections, and measures pressure with single scale in inch water column (WC), mm WC, cm WC, psid, or kPa with a display accuracy of + or - 3 or 4%. The die-cast aluminum case with impregnated hard coating is for measuring air and compatible gases and oil-based liquids. The circular dial is 4" in diameter and measures pressure with a single scale in inch water column (WC), mm WC, cm WC, psid, or kPa. The pressure being measured is held within a capsule in the gauge, which permits the use of the gauge on system pressures of up to 500 psig, even with differentials less than 0.1 in WC. The gauge accuracy is + or - 3% of full scale at 70 degrees F (21.1 degrees C) with + or - 4% of full scale on some models. The pressure limits are -20" Hg. to 500 psig. The temperature limit is 20 to 200 degrees F (-6.67 to 93.3 degrees C). Four female connections with 1/4" NPT (National Pipe Thread) rate provide for vertical mounting of the gauge. The connections are paired with one high and low pressure pair of taps on top for air and gas and one high and low pressure pair on bottom for liquids. This gauge is suitable as a readout device when measuring flowing fluids, pressure drop across filters, liquid levels in storage tanks, and other applications involving pressure, vacuum, or differential pressure. The gauge comes with two 1/4" NPT plugs for duplicate pressure taps, four flush mounting adapters with screws, and four surface mounting screws.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another referenc...

Manufacturer: Dwyer Instruments Brand: Dwyer Model: DPG-022

Replace your outdated analog gauges with the new Series DPG-000 Digital Pressure Gauge. The Series DPG-000 possesses a ±0.5% full-scale accuracy sensor. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gauges. Series DPG is battery powered and has an auto-shut off to conserve battery life. Battery life, on average, will last 2000 hours. A 4 button keypad allows easy access to features without the need to work through complex menus or difficult key combinations. These features include backlight, peak and valley, Tare or auto zero and conversion of the pressure units.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: DPG-006

Replace your outdated analog gauges with the new Series DPG-000 Digital Pressure Gauge. The Series DPG-000 possesses a ±0.5% full-scale accuracy sensor. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gauges. Series DPG is battery powered and has an auto-shut off to conserve battery life. Battery life, on average, will last 2000 hours. A 4 button keypad allows easy access to features without the need to work through complex menus or difficult key combinations. These features include backlight, peak and valley, Tare or auto zero and conversion of the pressure units.

Manufacturer: Winters Brand: Winters

PFP Premium Industrial Gauges are excellent for severe ambient and process conditions where harmful vibration and pulsation are present. Their applications include hydraulic equipment, pressure washers, oil field equipment, pumps, compressors and process systems. PFP Add-On Options Features: Liquid filled stainless steel case protects against vibration and pulsation Bayonet ring Highly accurate Back, bottom, or panel mounted Under and overload stops Ventable plug on 2.5€ to 4.5€ stainless steel and 4.5" brass bottom mount and 4" stainless steel back mount gauges Stainless steel or brass wetted parts Restrictor screw standard on dual scale (optional on single scale) Dry case available ASME B40.100 compliant (EN837-1 available) RoHS compliant (SS internals only) CRN registered 5 year warranty Made in Canada

Manufacturer: Winters Brand: Winters

PFP Premium Industrial Gauges are excellent for severe ambient and process conditions where harmful vibration and pulsation are present. Their applications include hydraulic equipment, pressure washers, oil field equipment, pumps, compressors and process systems. PFP Add-On Options Features: Liquid filled stainless steel case protects against vibration and pulsation Bayonet ring Highly accurate Back, bottom, or panel mounted Under and overload stops Ventable plug on 2.5€ to 4.5€ stainless steel and 4.5" brass bottom mount and 4" stainless steel back mount gauges Stainless steel or brass wetted parts Restrictor screw standard on dual scale (optional on single scale) Dry case available ASME B40.100 compliant (EN837-1 available) RoHS compliant (SS internals only) CRN registered 5 year warranty Made in Canada