Flowmeters - Page 17

Manufacturer: SIEMENS Brand: Siemens

SIEMENS 5210G02216XXID416HXX VAREA-METER 1IN 0-23GPM WATER FLOW METER D498970

Manufacturer: Hanchen Instrument Brand: Hanchen Instrument®

After your order is confirmed,the product will reach you within 7--13 business days. Test Test conditions: temperature 23.2 DEGC, relative humidity 50.5%. Sampling: according to GB3186 Conduct Should make the flow hanging tester, test plate to keep clean, dry; Sampling procedure The base of the tester will be placed on the platform, in the test plate is placed on the base of the appropriate position, the scraping coating is placed in the test panel at the top of the scale face to the operator. Fully mixing samples will enough amount of samples in the applicator in front of the scraping opening, hold hands scraping sides of two, at one end of the beginning and the leading edge in close contact, smooth, continuously from top to under Guala, also should be kept straight without ups and downs aboutS 2----3Complete the operation process. Should be scraped off the film test plate immediately placed vertically, should be placed on the film when the film was kept on the thin thickness. When the coating surface is dried, the flow hanging condition is observed. If the film thickness film is not in the next film thickness, the coating film of the thickness is not hung, and both ends of the coating film are respectively. 20mmInner zone. Results Parallel experiments with three samples in the same pattern. The test results in less than maximum wet film thickness of two samples measured by film without sagging (in a consistent representationumMeter) Attention: Hanchen Instrument aims to provide great product and service.We are trying our best to satisfy your requirement. If you have any question, please feel free to contact with us.We are delighted to help you. Or if you have any suggestion,do not hesitate to tell us.

Manufacturer: GPI Brand: GPI® The Proven Choice®

GPI DEF Digital Meters are designed specifically for use with diesel exhaust fluid. These DEF (Diesel Exhaust Fluid) (Urea) Fuel Meters are calibrated in gallons and are available with 1 inch NPT threads. It features an easy to read LCD display.

Manufacturer: Plast-O-Matic Brand: Plast-O-Matic Model: GYWX600V-PP Color: Translucent White

Series GYW flow indicators utilize a double-wall construction and are used on flanged piping systems handling highly corrosive and ultra-pure liquids compatible with Pyrex glass. They cannot be used with hydrofluoric acid or sodium hydroxide as they will etch the Pyrex cylinder wall. Natural polypropylene ends are standard and are also the least expensive. FKM seals are standard. These indicators will fit 1-1/2" smooth face standard companion flanges as well as DIN (European standard) flanges. Two flange O-ring seals are supplied; therefore, other gasket materials are not required. An optional fluttering device is also offered. Flow indicators are designed to indicate the presence or clarity of high purity or corrosive liquid in a piping system. For use with ultrapure liquids or chemicals compatible with acrylic. O-ring seals are used on indicators allowing them to seal at extremely low pressures as well as high pressures. Flow indicators are full ported, eliminating any possible flow resistance. Standard O-ring seals are Viton. Standard fasteners are stainless steel. The transparent outer cylinder wall is high impact strength acrylic. The inner wall (wetted) is Pyrex. Made of polypropylene.

Manufacturer: Hedland Flow Meters Brand: Hedland Flow Meters

The EZ-View series flow meter is a rugged, low cost direct reading industrial class flow meter that is simple to install. It can be mounted (installed) in any position from vertical to horizontal without costly flow straighteners or other special plumbing. Constructed of high impact polysulfone plastic, the EZ-View product line offers excellent structural integrity and chemical compatibility with a wide range of industrial chemicals.Automatically signals alarm, if flow is too high or too lowModels available for AC or DC power supplyPolysulfone bodies for standard applicationsEasy to installEasy flow limit adjustmentRelatively insensitive to shock and vibrationWithin +/-1% repeatabilityLow cost+/-5% full scale accuracyLength includes end fittingSwivel brass fitting. Brand Name|Hedland#MFR Part Number|H625-707/H526-008-NO#UNSPSC|41112501#Item|Flow Meter#Type|Variable Area#Series|EZ-View, H625#Connection Size|3/4 Inch#Flow Rate|1 - 7 gpm#Pressure Rating|325 psi#Connection Type|NPTF Male#Maximum Viscosity|4.2 - 108 cSt#Mounting Type|All Position#Temperature Rating|32 - 250 deg F#Dimensions|8-1/4 Inch Length#Material|Polysulfone#Standard/Approvals|ANSI/ASME B1.20.1#Application|Water Line, Commercial Buildings, Irrigation and Seal Water, For 0.876 Specific Gravity Oil Media

Manufacturer: Hedland Flow Meters Brand: Hedland Flow Meters

The EZ-View series flow meter is a rugged, low cost direct reading industrial class flow meter that is simple to install. It can be mounted (installed) in any position from vertical to horizontal without costly flow straighteners or other special plumbing. Constructed of high impact polysulfone plastic, the EZ-View product line offers excellent structural integrity and chemical compatibility with a wide range of industrial chemicals.Automatically signals alarm, if flow is too high or too lowModels available for AC or DC power supplyPolysulfone bodies for standard applicationsEasy to installEasy flow limit adjustmentRelatively insensitive to shock and vibrationWithin +/-1% repeatabilityLow cost+/-5% full scale accuracyLength includes end fittingSwivel brass fitting. Brand Name|Hedland#MFR Part Number|H624-704/H526-008-NO#UNSPSC|41112501#Item|Flow Meter#Type|Variable Area#Series|EZ-View, H624#Connection Size|1/2 Inch#Flow Rate|0.5 - 4 gpm#Pressure Rating|325 psi#Connection Type|NPTF Female#Maximum Viscosity|4.2 - 108 cSt#Mounting Type|All Position#Temperature Rating|32 - 250 deg F#Dimensions|7-3/4 Inch Length#Material|Polysulfone#Standard/Approvals|ANSI/ASME B1.20.1#Application|Water Line, Commercial Buildings, Irrigation and Seal Water, For 0.876 Specific Gravity Oil Media

Manufacturer: Fungilab Brand: Fungilab Model: J19

U-TUBE REVERSE FLOW BS/IP/RF 11 BS/IP/ U Tube Reverse Flow capillary viscometer for opaque liquids. Made of borosilicate glass, and non-alterable timing mark.

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The New LFM Series Flowmeters are made of injection molded, heat and chemically resistant polycarbonate bodies and fittings. Series LFM flowmeters have dual scales measuring in both GPM and LPM with 5% accuracy. A textured background on the body enhances scale readability. Standard in-line models come with 1/2" male NPT connections for LFMA, LFMB & LFMC; 3/4" male NPT connections for LFMD; 1" male NPT connections for LFME; and 2" male NPT connections for LFMF. Panel mount installation is available with 90° elbow fittings that include panel lock nuts. Various other fittings are available. CAUTION: Series LFM Flowmeters are for indoor use only or areas without direct sunlight. Polycarbonate is adversely affected by ultraviolet light.

Manufacturer: BROOKS Brand: Brooks

'Air Meter, Flow Range 0.3-3 SCFM, 1/8 Inch FNPT, Stainless Steel Fittings/Valves'

Manufacturer: Hedland Flow Meters Brand: Hedland Flow Meters

The EZ-View series flow meter is a rugged, low cost direct reading industrial class flow meter that is simple to install. It can be mounted (installed) in any position from vertical to horizontal without costly flow straighteners or other special plumbing. Constructed of high impact polysulfone plastic, the EZ-View product line offers excellent structural integrity and chemical compatibility with a wide range of industrial chemicals.Automatically signals alarm, if flow is too high or too lowModels available for AC or DC power supplyPolysulfone bodies for standard applicationsEasy to installEasy flow limit adjustmentRelatively insensitive to shock and vibrationWithin +/-1% repeatabilityLow cost+/-5% full scale accuracyLength includes end fittingSwivel brass fitting. Brand Name|Hedland#MFR Part Number|H625-718/H526-008#UNSPSC|41112501#Item|Flow Meter#Type|Variable Area#Series|EZ-View, H625#Connection Size|3/4 Inch#Flow Rate|3 - 18 gpm#Pressure Rating|325 psi#Connection Type|NPTF Male#Maximum Viscosity|4.2 - 108 cSt#Mounting Type|All Position#Temperature Rating|32 - 250 deg F#Dimensions|8-1/4 Inch Length#Material|Polysulfone#Standard/Approvals|ANSI/ASME B1.20.1#Application|Automotive, Power Generation, Pulp and Paper, Municipal, Lube Oil Systems and OEM, For 0.876 Specific Gravity Oil Media