Flowmeters - Page 34

Manufacturer: HEDLAND Brand: Hedland

NEW HEDLAND H624-104 EZ-VIEW 0.5-4GPM FLOW METER 1/2IN NPT D511466

Manufacturer: Flomec Flow Meters Brand: Flomec Flow Meters

Flomec MR 5-30 series 5 - 30 gpm nutating disc mechanical fuel meter made from aluminum rated to 50 psi pressure with 3/4" NPT connection. Brand Name|Flomec#MFR Part Number|126300-01#UPC|031401000641#UNSPSC|41112501#Item|Mechanical Fuel Meter#Connection Size|3/4 Inch#Flow Rate|5 - 30 gpm#Pressure Rating|50 psi#Master Totalizer|999999.9 gal#Connection Type|NPT#Display Type|4-Digit Batch, 8-Digit Total#Temperature Rating|-20 to 125 deg F#Dimensions|7 Inch Length x 6-1/4 Inch Width x 5-7/8 Inch Height#Material|Aluminum#Standard/Approvals|UL Listed to US and Canadian Standards

Manufacturer: Racine Federated Brand: Hedland Model: H624-604-R

EZ-View Flow Meters With Flow-Alert Flow Switch. Reed switch and latching models. Automatically signals alarm if flow is too high or too low. Models available for AC or DC power supply. Latching models include Hirschmann type electrical connector. Radel R for more aggressive media. Easy to install. Easy flow limit adjustment. Operates in any position. Relatively insensitive to shock and vibration. Repeatability within +/-1 percent. Low cost. Materials: polysulfone plastic body, piston and cone. Common parts are Spring: T300-series stainless, Indicator Ring: Buna N, Pressure Seals: Buna N, Fittings: C360 Brass, Limit Indicators: Polypropylene, Magnet: Strontium Ferrite, Retaining Ring: PH15 - 7MO stainless.

Manufacturer: Solinst Brand: Solinst

The Solinst 101 Water Level Meter is ideal for water level measurement in boreholes, standpipes and wells.This water level meter is very easy to operate and read to each millimetre or 1/100ft. Choices of probe designs are available on these water level meters. For the P7 version each probe is attached permanently to laser marked PVDF flat tape which is fitted on a well balanced reel. This water level meter has a PVDF flat tape and has increased tensile strength and improved electrical efficiency by using 6 strands of copper coated stainless steel and 13 strands of stainless steel in each conductor. The P7 pressure probe is submersible to 300 m (1000 ft) and has the sensor mounted at the tip to provide consistent accuracy. A 9 volt battery housed in an easy access battery drawer powers the meter.

Manufacturer: Great Plains Industries Brand: FLOMEC Model: G2S07N09GMA

This Stainless Steel ¾ in. flowmeter comes with NPT fittings, the 09 Computer, and is calibrated to read gallons per minute (GPM).

Manufacturer: Great Plains Industries Brand: FLOMEC Model: 039-G2S10N09GMA

GPI manufactures quality fuel transfer pumps, fuel meters, flow meters, and industrial instrumentation for the fluid transfer and liquid flow meter markets. The company, founded in 1968, is headquartered in Wichita, KS.

Manufacturer: DIGITEN Brand: DIGITEN

Voltage:DC12V Operation mode:N/C,normal close. Inlet/Outlet Ports:1" to 1",GB screw thread Response Time:ON≤0.15s,OFF≤0.3s Rectification: synchronous rectification Pressure:0.02-0.8Mpa Temperature:0-75°C Estimated Valve Life:500,000 Cycles Filter Screen:Stainless Steel Inlet Filter Flow characteristic:0.02Mpa≥3 L/min;0.1Mpa≥12 L/min;0.8Mpa≥35 L/min Usage:water and low viscosity fluids.

Manufacturer: JS-10914046 Brand: WEONE

Note: The color of the item may vary slightly due to photography and your own computer Features: Widely used for measuring and controlling the flow of oxygen Beautiful look,low weight,unbreakable and long life span. Material: Acrylic + plastic + metal Village ruler Specifications: 66.5x22x90mm/2.62"x0.87"x3.54"(WxTxH) Connection: 8MM pagoda (hose connection) Center distance: 66.5mm Applicable medium: Gas Accuracy: 5% Flow range: 0-10LPM Working pressure: ¡Ü0.6Mpa Operating temperature: 0-60 ¡ã C Product function: to measure gas single-phase non-pulsating flow Scope: Mainly used to detect oxygen flow, control the flow of oxygen, the gas flow can be detected. The case can be used for industrial, oxygen and other gas flow to be calculated Package include: 1 x LZQ-3 Oxygen Flow Meter

Manufacturer: Dwyer Instruments Brand: Dwyer Model: MMA-41

The standard Model MMA flowmeter is suitable for both gas and liquid applications. It can be configured by the user with the parts provided to have non-removable top or bottom from mounted metering valves or no valve at all. The transparent nylon material provides high chemical resistance, low moisture absorption and is transparent to facilitate routine inspection. Using the assembly key provided, the flowmeter can be disassembled anytime for cleaning or reconfiguration. In OEM quantities, ultrasonically welded caps or interchangeable mole cores enable production of the MMA flowmeter with a low profile or flat front surface where no valve is required. The MMA is practically unbreakable, mounts easily, and is easy to read. Two 5/16" OD mounting-connection tubes permit quick push-on connection of rubber or plastic tubing. A bottom clip for "stand up" mounting is also provided. Despite its compactness, the MMA flowmeter features a 2" scales which combined with precision molding, enables highly repeatable readings to be made to within ±4% accuracy. Where a compact flowmeter is required to measure small volume air flows, the Model MMF is recommended. Easy to mount, they require a minimum of panel space. A white back on the flow tube makes the ball float easy to see. The scale is highly visible and easy to read. Scale graduations are printed on aluminum alongside the flow tube (not on it), so the position of ball float is instantly visible.

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Offering advanced features at low cost, the Dwyer® Series MM flowmeters are ideal for a wide range of OEM and user application in medical equipment, air samplers, gas analyzers, pollution monitors, chemical injectors, cabinet purging, etc. The standard Model MMA flowmeter is suitable for both gas and liquid applications. It can be configured by the user with the parts provided to have non-removable top or bottom from mounted metering valves or no valve at all. The transparent nylon material provides high chemical resistance, low moisture absorption and is transparent to facilitate routine inspection. Using the assembly key provided, the flowmeter can be disassembled anytime for cleaning or reconfiguration. In OEM quantities, ultrasonically welded caps or interchangeable mole cores enable production of the MMA flowmeter with a low profile or flat front surface where no valve is required. The MMA is practically unbreakable, mounts easily, and is easy to read. Two 5/16" OD mounting-connection tubes permit quick push-on connection of rubber or plastic tubing. A bottom clip for "stand up" mounting is also provided. Despite its compactness, the MMA flowmeter features a 2" scales which combined with precision molding, enables highly repeatable readings to be made to within ±4% accuracy.