Flowmeters - Page 37

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer Model: RMC-144-SSV

The Rate-Master® Flowmeter line of direct reading precision flowmeters incorporates many unique user features at moderate cost. These low cost flowmeters are ideal for general use. The direct reading scales eliminate troublesome conversions. The scales are brushed aluminum, coated with epoxy and the graduations are on both sides of the indicating tube. Special integral flow guides stabilize the float throughout the range to keep it from hunting or wandering in the bore. The float is highly visible against a white background. All Rate-Master® flowmeter bodies are injection molded of tough, clear, shatter-proof polycarbonate plastic around a precision tapered pin. The result is accurate and repeatable readings. The single piece plastic body is mounted to a stainless steel back bone into which pipe thread inserts are welded to absorb piping torque. The Rate-Master® flowmeter can be neatly through-panel mounted to keep flow tube centers in the same plane as the panel surface or surface mounted on the panel by means of tapped holes in the backbone. When through-panel mounted, the bezel automatically positions the instrument at the correct depth in the panel cutout. Surface mounted units can also be held in place by the piping. All mounting hardware plus installation and operating instructions are included. (Picture shows standard range).

Manufacturer: GEMU Brand: Gemu

FLOWMETER, 807, 4000 l/hr DN 50 Poly Pro Union connector

Manufacturer: Tuthill Brand: Fill-Rite Model: 807CL

Built into every fuel transfer pump, chemical transfer pump and meter is over 50 years of experience—and the pride and workmanship associated with the moniker Made in USA. We use only the most durable materials to insure long life and dependability. Fill-Rite and Sotera branded products deliver superior performance time and time again, regardless of the application or installation. The 807CL Mechanical flow meter has a large easy to read display, flow ports can be positioned vertically or horizontally, UL/cUL listed, handles fluid of any viscosity, rated for Gasoline, Diesel, Kerosene, mineral spirits, Stoddard solvents and heptane. Fill-Rite meters provide precision and durability in a cost-effective design. The 807CL is a 3 wheel mechanical liter meter designed for transfer pumps with a flow rate of 19 to 76 LPM. This meter has a 3/4 inlet and outlet.

Manufacturer: COLE-PARMER Brand: Cole-Parmer

Virtually unbreakable Direct reading for use with air or water Easy to install-mount vertically in your system Simple disassembly/assembly for maintenance

Manufacturer: COLE-PARMER Brand: Brooks Instrument

Designed for rough-duty installations, a built-in guide rod stabilizes the float for easier reading. These are suitable for most general process fluids (brass reinforcing the connection does not come in contact with the fluid). Common applications are for RO systems, air-sampling skids and chemical feed systems in water treatment. A highly durable compact design Block body with brass-reinforced connections-virtually unbreakable Large scale on a flat surface is easy to read Many versions have dual time-unit scales

Manufacturer: Fungilab Brand: Fungilab Model: J20

U-TUBE REVERSE FLOW BS/IP/RF 9 BS/IP/ U Tube Reverse Flow capillary viscometer for opaque liquids. Made of borosilicate glass, and non-alterable timing mark.

Manufacturer: PIUSI USA Brand: PIUSI Model: F00472A30

K600/3 PULSER 1in GAS DIESEL METERFluid Electronic Meter 2.64-26.4 gpm. Accuracy +/- .5%. Fluids: Diesel, Light oil. Pulsar 133 p.gal, Viscosity 10-2000 cST, Max working pressure 426 psi. IN/OUT connection 1" BSP. Weight 3.7lbs.

Manufacturer: Digiflow Brand: DigiFlow

The Digiflow DF088 is an 8,000 gallon water flow meter. It offers you another more precise way to determine your filter maintenance schedule.

Manufacturer: Bel-Art Brand: Bel-Art Products Model: 404060005

Mounted flowmeters with aluminum fittings are economical and have Buna-N, 316 stainless steel and Delrin valves with hose barbs that accept tubing from 8mm (5/16”) to 9.5mm (3/8” I.D., which can be removed for use with female 3.2mm (1/8”)NPT fittings. Specifications: Maximum operating pressure 200 p.s.i.g. and maximum operating temperature 121 degrees C (250F). When used with glass float, air flow range is 0.75 to 5.77 ml/min and water flow range is 0.01 to 0.07 ml/min. With stainless steel float, air flow range is 1.40 to 16.67 ml/min and water flow range is 0.02 to 0.28 ml/min. 65mm scale. Dimensions are 15.8 x 3.2cm wide (6-1/4” x 1-1/4”). 1.6cm (5/8”) mounting holes are located 11.4cm (4-1/2”) center to center.

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Accurately measure flow rates of air, water, and other commonly used gases with the Series VA Variable Area Glass Flowmeters. Flowmeters are designed with an easy-to-read universal mm scale and supplied with a correlation chart containing calibration data for air and water. Correlation data for other gases and liquids are available. Permanently fused ceramic scale with vertical locator line reduces parallax and eye fatigue. Thick polycarbonate front shield protects tube from breakage and also serves as a magnifying lens to enhance reading resolution. Glass flowmeters are suitable for metering carrier gases, liquid and gas measurement in pilot plants, laboratories, process flow and level indicating. Units are equipped with a standard 6-turn needle valve for flow rate control. High precision metering valves with non-rising stems (sold separately) are available for high sensitivity control and resolution - particularly suited for very low flow rates. Flowmeters are shipped completely assembled and ready for panel mounting. Use an optional acrylic tripod base to convert to self-standing bench mounting. (Standard range shown in picture).