Flowmeters - Page 40

Manufacturer: Dwyer Instruments Brand: Dwyer Model: RMC-141

line of direct reading precision flowmeters incorporates many unique user features at moderate cost. These low cost flowmeters are ideal for general use.

Manufacturer: Racine Federated Brand: Hedland Model: H624-010-R

EZ-View Flow Meters For Water. 1/2 inch ports. EZ to install, in any position. Radel R for more aggressive media. No special piping or flow straighteners needed. No electrical connections. Direct reading indication. Accuracy within 5 percent full scale. Relatively insensitive to shock and vibration. Materials: Polysulfone plastic body, piston and cone. Common parts are Spring: T300-series stainless, Indicator Ring: Buna N, Pressure Seals: Buna N, Fittings: C360 brass, Limit Indicators: Polypropylene, Retaining Ring: PH15 - 7MO stainless.

Manufacturer: COLE-PARMER Brand: Brooks Instrument

Machined from solid acrylic blocks, these meters have integral metering tubes that provide precise readings even in aggressive plant environments. The meters' inlet/outlet ports and mounting studs are extended for easy panel installation. An alternate option is a tripod base (32462-50 sold separately) which allows for mobility from bench to bench. Note: There are many additional types of acrylic flowmeters not listed here. Contact our Application Specialits for quotes on acrylic meters with special requirements. Durable single-piece body withstands severe shock and vibration Ideal for process plant applications on air sampling equipment, gas analyzers and chemical feed systems for water treatment. Flexible design allows for panel or bench mounting

Manufacturer: COLE-PARMER Brand: Cole-Parmer

All flowmeters come with correlation data sheets for water and air at standard temperature and pressure (STP). We can also supply calibration data for oxygen, nitrogen, hydrogen, helium, CO2, argon, other liquids and gases, and for conditions other than STP-call our Application Specialists for more information. Compact size makes these ideal for tight measuring areas Clear polycarbonate front shield magnifies scale 16%. A vertical tangential locator line ensures hairline accuracy in reading float position. Each flowmeter consists of a heavy-walled glass flowtube mounted in an anodized aluminum frame with white acrylic back plate (1/8' thick). Minimum flow rate is less than one tenth of the maximum flow value in the ordering table. Select a flowmeter with a high-precision valve for superior flow rate control-ideal for low-flow applications or for any application where you need precise flow control. The 16-turn high-precision valve features a nonrising stem to more accurately hit your desired set point.

Manufacturer: Hedland Flow Meters Brand: Hedland Flow Meters

The EZ-View series flow meter is a rugged, low cost direct reading industrial class flow meter that is simple to install. It can be mounted (installed) in any position from vertical to horizontal without costly flow straighteners or other special plumbing. Constructed of high impact polysulfone plastic, the EZ-View product line offers excellent structural integrity and chemical compatibility with a wide range of industrial chemicals.Automatically signals alarm, if flow is too high or too lowModels available for AC or DC power supplyPolysulfone bodies for standard applicationsEasy to installEasy flow limit adjustmentRelatively insensitive to shock and vibrationWithin +/-1% repeatabilityLow cost+/-5% full scale accuracyLength includes end fittingDo not use pipe dopeUse Teflon tape onlyUse with plastic fittings only. Brand Name|Hedland#MFR Part Number|H621-607/H526-008#UNSPSC|41112501#Item|Flow Meter#Type|Variable Area#Series|EZ-View, H621#Connection Size|1 Inch#Flow Rate|1 - 7 gpm#Pressure Rating|325 psi#Connection Type|NPTF Male#Maximum Viscosity|4.2 - 108 cSt#Mounting Type|All Position#Temperature Rating|32 - 250 deg F#Dimensions|5-1/4 Inch Length#Material|Polysulfone#Standard/Approvals|ANSI/ASME B1.20.1#Application|Water Line, Commercial Buildings, Irrigation and Seal Water, For 1.0 Specific Gravity Water Media

Manufacturer: Key Instruments Brand: Brooks Instrument

Technical Specification Item Flowmeter Type Variable Area Max. Pressure (PSI) 100 Connection Size (In.) 1/8 FNPT Max. Temp. (F) 150 Length (In.) 1-1/2 Width (In.) 1 Height (In.) 4-9/16 Housing Material Polycarbonate Fitting Stainless Steel Chamber Material Polycarbonate Flow Range @ CCM of Water 20 to 300 Flow Range 20 to 300 ccm Accuracy (%) +/-4.0 Flow Material Water Flow Range @ CCM 20 to 300 Max. Viscosity 16.4 CST Insert Brass O-Ring Viton Compliance & Restrictions Compliance and Restrictions This product has been manufactured to be compliant with the "Safe Drinking Water Act" requirements for low lead in potable (human consumption - drinking and cooking) and non-potable water applications (non-human consumption). This item is restricted for conveying or dispensing water for potable use (human consumption) in states that require 3rd party certification of compliance with the "Safe Water Drinking Act" (CA, LA, MD, VT). This item is restricted for international sale. This listing is for each. _DELETE_

Manufacturer: GEMU Brand: Gemu

GEMU 822-50-7-21-14-5-73-11000 FLOWMETER, 822, 1,1-11 m3/h DN 50

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Dwyer® Series WMT2 Multi-Jet Water Meter is ideal for commercial and industrial applications. The multi-jet design allows simplicity and accuracy with wide flow ranges even in low flow applications. The meter is designed for long service life and relatively maintenance-free operation, even under adverse conditions. The magnetically driven, hermetically sealed register will not leak or fog and is completely separated from the water. The reed switch is activated by a magnet on the dial, which is directly proportional to the flow rate. The output is perfect for remote monitoring of flow rate or flow totalization, and can interface with PLC's, counters, data loggers, and SCADA systems. Note: NOT FOR POTABLE WATER USE, BRASS CONTAINS LEAD IN EXCESS OF LOW LEAD LIMITS. (Standard range shown in picture).

Manufacturer: COLE-PARMER Brand: Cole-Parmer

These panel-mount flowmeters feature rotatable 90°> elbow adapters for panel-mount installation. Installation is easy-simply drill two holes in your panel, insert meter fittings through the holes, secure with lock nuts (included), and rotate scale for easy viewing. Wetted materials include polysulfone and VITON(r) O-rings. See pictures below and right to view A x B x C x D dimensions of panel-mount flowmeters.

Manufacturer: Brook Instraments Brand: Brook Instraments

Flowmeter 7Gpm Solvent Ss ? Fvcr,