Flowmeters - Page 44

Manufacturer: uxcell Brand: uxcell

Flowmeter measuring the oil or water, easy to read for its clear scale.Straight tube style connect the liquid tube by two end thread.Stainless steel material inner and glasses tube design.Read float at largest diameter, you will kow the flow of water.

Manufacturer: Leaton Brand: Leaton

Product Label: Digital Anemometer LD8901 This Wind Speed Temperature Gauge Anemometer with LCD digital display is ideal for weather enthusiast or professional to measure air velocity and air temperature accurately. This portable anemometer with strap for convenient carrying. Air velocity and temperature measurement Ideal tool for windsurfing, sailing, fishing, kite flying and mountaineering Also use it for industrial and home purpose such as measuring wind speed and temperature of CPU computer fans, air blower LED back light design for operation under poor illumination Wind chill indication and Beaufort scale Data hold and low battery indication Current / max / min / average wind speed reading Five Units of Air Velocity: m/s, Km/h, ft/min, Knots, mph. Powered by a built-in 9V battery Air Velocity Specification: Range: 0 - 45 m/s, 0 - 140 km/h, 0 - 8800 ft/min, 0 - 100 mph, 0 - 88 Knots. Resolution: 0.1 m/s, 0.3 km/h, 19 ft/min, 0.2 mph, 0.2 Knots. Threshold: 0.3m/s, 1 km/h, 60 ft/min, 0.7 mph, 0.6 Knots. Air Temperature Specification: Range: Between 0°C and 45°C (between 32°F and 113°F) Resolution: 0.2°C, 0.36°F. Accuracy: ±2°C, ±3.6°F. Operating Temperature: Between -10°C and +50°C (between 14°F and 122°F) Operating Humidity: 40% RH - 85% RH Storage Temperature: Between -20°C and +60°C, between -4°F and 140°F. Current Consumption: About 3mA. included: 1x Infrared Digital Anemometer DL8901 1x operating instructions.

Manufacturer: BAYM Electric Co., Ltd Brand: BAYM Model: BM-3/4-flowmeter

The modular designed can be used in conjunction with output module, sensor and remote transmitter. Good repeatability and strong stability, unique LCD (LCD)count, you can reset the 5 bit (9999.9) single oil volume, a cumulative total of 6 bits are not cleared. The accuracy ofthe positive and the negative is less than or equal to 1%the repeatability error of less than 2% units of measurement for (/L, /GAL /QTS a gallon, quart, pint (PTS)switch freely is the rise in domestic basic, easy to use), two keys (CALIBRATE DISPLAY) with the use of simple and easy to operate! NOTE: This meter can be normally use should meet two conditions: 1.work environment requires an oil pump or water pump above 0.1mA pressure 2.the working environment needs the flow above 10 liters per minute It can not be used to measure the small flow and water And it only can measure diesel oil,gasolene,carbinol and other liquid

Manufacturer: Dwyer Instruments Brand: Dwyer Model: VFB-81-BV

The Visi–Float flowmeter bodies are cut and precision machined from solid, clear acrylic plastic blocks. This construction not only produces a handsome finished product, but permits complete visual inspection. As a result, the Visi-Float® flowmeters are especially popular for medical and laboratory equipment applications.

Manufacturer: Tuthill Brand: Fill-Rite Model: 825KTF1582

Built into every fuel transfer pump, chemical transfer pump and meter is over 50 years of experience—and the pride and workmanship associated with the moniker “Made in USA”. We use only the most durable materials to insure long life and dependability. Fill-Rite and Sotera branded products deliver superior performance time and time again, regardless of the application or installation.

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Rate-Master® Flowmeter line of direct reading precision flowmeters incorporates many unique user features at moderate cost. These low cost flowmeters are ideal for general use. The direct reading scales eliminate troublesome conversions. The scales are brushed aluminum, coated with epoxy and the graduations are on both sides of the indicating tube. Special integral flow guides stabilize the float throughout the range to keep it from hunting or wandering in the bore. The float is highly visible against a white background. All Rate-Master® flowmeter bodies are injection molded of tough, clear, shatter-proof polycarbonate plastic around a precision tapered pin. The result is accurate and repeatable readings. The single piece plastic body is mounted to a stainless steel back bone into which pipe thread inserts are welded to absorb piping torque. The Rate-Master® flowmeter can be neatly through-panel mounted to keep flow tube centers in the same plane as the panel surface or surface mounted on the panel by means of tapped holes in the backbone. When through-panel mounted, the bezel automatically positions the instrument at the correct depth in the panel cutout. Surface mounted units can also be held in place by the piping. All mounting hardware plus installation and operating instructions are included. (Picture shows standard range).

Manufacturer: Blue-White Industries Ltd. Brand: Blue-White

F-300 series flow meters utilize a pitot tube pick up and a hard edged float design to provide a convenient and economic means of measuring water flow in a closed pipe system. The F-300 impact tube flow meter features a tough, one-piece machined acrylic meter body, corrosion resistant internal parts, and permanent screen-printed scale. You get all the strength and long service life required in most commercial and industrial applications. Each F-300 series is individually packaged with gasket seal and mounting clamps. Top Mount. Range (Sch 40 installations): 20 - 120 GPM

Manufacturer: American Granby Brand: American Granby

1 1/2" Piping Size, 20-80 GPM, Pulsafeeder

Manufacturer: COLE-PARMER Brand: Brooks Instrument

Machined from solid acrylic blocks, these meters have integral metering tubes that provide precise readings even in aggressive plant environments. The meters' inlet/outlet ports and mounting studs are extended for easy panel installation. An alternate option is a tripod base (32462-50 sold separately) which allows for mobility from bench to bench. Note: There are many additional types of acrylic flowmeters not listed here. Contact our Application Specialits for quotes on acrylic meters with special requirements. Durable single-piece body withstands severe shock and vibration Ideal for process plant applications on air sampling equipment, gas analyzers and chemical feed systems for water treatment. Flexible design allows for panel or bench mounting

Manufacturer: Hedland Flow Meters Brand: Hedland Flow Meters

The EZ-View series flow meter is a rugged, low cost direct reading industrial class flow meter that is simple to install. It can be mounted (installed) in any position from vertical to horizontal without costly flow straighteners or other special plumbing. Constructed of high impact polysulfone plastic, the EZ-View product line offers excellent structural integrity and chemical compatibility with a wide range of industrial chemicals.Automatically signals alarm, if flow is too high or too lowModels available for AC or DC power supplyPolysulfone bodies for standard applicationsEasy to installEasy flow limit adjustmentRelatively insensitive to shock and vibrationWithin +/-1% repeatabilityLow cost+/-5% full scale accuracyLength includes end fittingDo not use pipe dopeUse Teflon tape onlyUse with plastic fittings only. Brand Name|Hedland#MFR Part Number|H621-707/H526-008-NC#UNSPSC|41112501#Item|Flow Meter#Type|Variable Area#Series|EZ-View, H621#Connection Size|1 Inch#Flow Rate|1 - 7 gpm#Pressure Rating|325 psi#Connection Type|NPTF Male#Maximum Viscosity|4.2 - 108 cSt#Mounting Type|All Position#Temperature Rating|32 - 250 deg F#Dimensions|5-1/4 Inch Length#Material|Polysulfone#Standard/Approvals|ANSI/ASME B1.20.1#Application|Automotive, Power Generation, Pulp and Paper, Municipal, Lube Oil Systems and OEM, For 0.876 Specific Gravity Oil Media