Flowmeters - Page 48

Manufacturer: Racine Federated Brand: Hedland Model: H205B-010

Flow Meter For Water and Other Liquids. Direct reading. Install in any position. 360 degrees rotatable guard/scale. Easier-to-read linear scale. No flow straighteners or special piping required. Relatively insensitive to shock and vibration. Good viscosity stability. Temperature up to 240 degrees F. Accuracy +/-2 percent full scale. Repeatability +/-1 percent. Special scales available. Calibrated for 1.0 S.G. Materials: C360 Brass body, piston and cone. Common parts are Spider Plate: T316 SS, Spring: T302 SS, Fasteners: T303 SS, Pressure Seals: Viton, Guard: Polycarbonate, Retaining Ring: T316 SS, Retaining Spring: T316 SS, Indicator and Internal Magnet: PPS / Ceramic, Guard Seal / Bumper: Buna N, Scale Support: 6063 - T6 Aluminum and End Caps: Nylon ST.

Manufacturer: Fill-Rite Brand: Fill-Rite

Fill Rite 901. FLOW METER 40GPM 1" PORTS

Manufacturer: Adafruit Brand: Adafruit Model: 828

Adafruit Liquid Flow Meter - Plastic 1/2" NPS Threaded Adafruit Product ID: 828

Manufacturer: Great Plains Industries Brand: GPI® The Proven Choice® Model: 113520-1

FLOMEC turbine flowmeter replacement battery kit for 09 series LCD display, two 3-volt lithium Li-MNO2 batteries. 5-year battery life.

Manufacturer: Cramer Decker Industries Brand: Cramer Decker Industries

FlowmeterOxygen1/2 to 15 LPM 1/8" FNPT

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Offering advanced features at low cost, the Dwyer® Series MM flowmeters are ideal for a wide range of OEM and user application in medical equipment, air samplers, gas analyzers, pollution monitors, chemical injectors, cabinet purging, etc. The standard Model MMA flowmeter is suitable for both gas and liquid applications. It can be configured by the user with the parts provided to have non-removable top or bottom from mounted metering valves or no valve at all. The transparent nylon material provides high chemical resistance, low moisture absorption and is transparent to facilitate routine inspection. Using the assembly key provided, the flowmeter can be disassembled anytime for cleaning or reconfiguration. In OEM quantities, ultrasonically welded caps or interchangeable mole cores enable production of the MMA flowmeter with a low profile or flat front surface where no valve is required. The MMA is practically unbreakable, mounts easily, and is easy to read. Two 5/16" OD mounting-connection tubes permit quick push-on connection of rubber or plastic tubing. A bottom clip for "stand up" mounting is also provided. Despite its compactness, the MMA flowmeter features a 2" scales which combined with precision molding, enables highly repeatable readings to be made to within ±4% accuracy.

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Offering advanced features at low cost, the Dwyer® Series MM flowmeters are ideal for a wide range of OEM and user application in medical equipment, air samplers, gas analyzers, pollution monitors, chemical injectors, cabinet purging, etc. The standard Model MMA flowmeter is suitable for both gas and liquid applications. It can be configured by the user with the parts provided to have non-removable top or bottom from mounted metering valves or no valve at all. The transparent nylon material provides high chemical resistance, low moisture absorption and is transparent to facilitate routine inspection. Using the assembly key provided, the flowmeter can be disassembled anytime for cleaning or reconfiguration. In OEM quantities, ultrasonically welded caps or interchangeable mole cores enable production of the MMA flowmeter with a low profile or flat front surface where no valve is required. The MMA is practically unbreakable, mounts easily, and is easy to read. Two 5/16" OD mounting-connection tubes permit quick push-on connection of rubber or plastic tubing. A bottom clip for "stand up" mounting is also provided. Despite its compactness, the MMA flowmeter features a 2" scales which combined with precision molding, enables highly repeatable readings to be made to within ±4% accuracy.

Manufacturer: uxcell Brand: uxcell

Flowmeter measuring the oil or water, easy to read for its clear scale.Straight tube style connect the liquid tube by two end thread.Stainless steel material inner and glasses tube design.Read float at largest diameter, you will kow the flow of water.

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Rate-Master® Flowmeter line of direct reading precision flowmeters incorporates many unique user features at moderate cost. These low cost flowmeters are ideal for general use. The direct reading scales eliminate troublesome conversions. The scales are brushed aluminum, coated with epoxy and the graduations are on both sides of the indicating tube. Special integral flow guides stabilize the float throughout the range to keep it from hunting or wandering in the bore. The float is highly visible against a white background. All Rate-Master® flowmeter bodies are injection molded of tough, clear, shatter-proof polycarbonate plastic around a precision tapered pin. The result is accurate and repeatable readings. The single piece plastic body is mounted to a stainless steel back bone into which pipe thread inserts are welded to absorb piping torque. The Rate-Master® flowmeter can be neatly through-panel mounted to keep flow tube centers in the same plane as the panel surface or surface mounted on the panel by means of tapped holes in the backbone. When through-panel mounted, the bezel automatically positions the instrument at the correct depth in the panel cutout. Surface mounted units can also be held in place by the piping. All mounting hardware plus installation and operating instructions are included. (Picture shows standard range).

Manufacturer: Racine Federated Brand: Hedland Model: H621-028

EZ-View Flow Meters For Water. 1 inch ports. EZ to install, in any position. Polysulfone bodies for standard applications. No special piping or flow straighteners needed. No electrical connections. Direct reading indication. Accuracy within 5 percent full scale. Relatively insensitive to shock and vibration. Materials: Polysulfone plastic body, piston and cone. Common parts are Spring: T300-series stainless, Indicator Ring: Buna N, Pressure Seals: Buna N, Fittings: C360 brass, Limit Indicators: Polypropylene, Retaining Ring: PH15 – 7MO stainless.