Flowmeters - Page 49

Manufacturer: DIGITEN Brand: DIGITEN

Easy to install,size is small. Can connect to flow sensor,temperature sensor,solenoid valve.monitor gases,liquid flow.quantitative flow control,total flow alarm. Monitor real-time flow rate. Display temperature of the liquid.need to extra add temp sensor. Control quantitative flow.when flow reach to the presetting flow,system will output signal to solenoid valve(ON/OFF). Monitor total flow,total flow alarm. Password can protect setting value. When flowmeter is working,faucet dynamic display. You can set K constant for various of flowmeters. Specification: Working volt: DC24V¡À8V/1A Flow range:1-30L/min LCD size:3¡±,built-in backlight. Viewing Angle:0-120 degree. Solenoid valves working voltage:DC12V/0.3-0.5A(NC) Controller case size:103x77x35mm,Controller cutout size:98x73mm. Package Includes: 1 x LCD flow display controller 1 x G1/2" flow sensor 1 x Temperature sensor 1 x Instruction

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Dwyer® Series WM2 Multi-Jet Water Meter is ideal for commercial and industrial applications. The multi-jet design allows for simplicity and accuracy with wide flow ranges, even in low flow applications. The magnetically driven, hermetically sealed register will not leak or fog and is completely separated from the water. These water meters are designed for long service life and maintenance-free operation, even under harsh conditions. Note: NOT FOR POTABLE WATER USE, BRASS CONTAINS LEAD IN EXCESS OF LOW LEAD LIMITS. (Standard range shown in picture).

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Visi-Float® flowmeter bodies are cut and precision machined from solid, clear acrylic plastic blocks. This construction not only produces a handsome finished product, but permits complete visual inspection. As a result, the Visi-Float® flowmeters are especially popular for medical and laboratory equipment applications. The front scale location and white background provides excellent visibility. The direct reading scales are hot stamped into the plastic and will not wear off. Mid-range calibration is established with a master flowmeter. Accuracy is ±5% of full scale for VFA models, ±3% for VFB. Scales average 2" long on the VFA models, 4" long on VFB. The machined acrylic bodies of the Visi-Float® flowmeters are practically unbreakable. Fabrication is backed by over 60 years of experience in acrylic instrument machining. The tapered bore is precision machined to a smooth surface that provides perfect visibility of the indicating float. The VFA and VFB models are available with either brass or stainless steel inlet and outlet connections and are tapped for 1/8" NPT thread. VFB models 85 and 86 have either 1/4" back or 3/8" end connections. All standard models employ Buna-N o-rings for leak proof operation and are available with either back or end connections for horizontal or vertical piping. Precision metering valves in brass or stainless steel are available for most VFA and VFB models. All Visi-Float® flowmeters have metal mounting inserts on rear for panel mounting. They can also be supported directly by system piping. (Standard range shown in picture).

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Dwyer® Series WMT2 Multi-Jet Water Meter is ideal for commercial and industrial applications. The multi-jet design allows simplicity and accuracy with wide flow ranges even in low flow applications. The meter is designed for long service life and relatively maintenance-free operation, even under adverse conditions. The magnetically driven, hermetically sealed register will not leak or fog and is completely separated from the water. The reed switch is activated by a magnet on the dial, which is directly proportional to the flow rate. The output is perfect for remote monitoring of flow rate or flow totalization, and can interface with PLC's, counters, data loggers, and SCADA systems. Note: NOT FOR POTABLE WATER USE, BRASS CONTAINS LEAD IN EXCESS OF LOW LEAD LIMITS. (Standard range shown in picture).

Manufacturer: Hyvair Brand: Hyvair

HYVAIR FLOW CONTROL D05-FC1-AB-M0

Manufacturer: Racine Federated Brand: Hedland Model: H620-004-R

EZ-View Flow Meters For Water. 3/4 inch ports. EZ to install, in any position. Radel R for more aggressive media. No special piping or flow straighteners needed. No electrical connections. Direct reading indication. Accuracy within 5 percent full scale. Relatively insensitive to shock and vibration. Materials: Polysulfone plastic body, piston and cone. Common parts are Spring: T300-series stainless, Indicator Ring: Buna N, Pressure Seals: Buna N, Fittings: C360 brass, Limit Indicators: Polypropylene, Retaining Ring: PH15 - 7MO stainless.

Manufacturer: Racine Federated Brand: Hedland Model: H620-016-R

EZ-View Flow Meters For Water. 3/4 inch ports. EZ to install, in any position. Radel R for more aggressive media. No special piping or flow straighteners needed. No electrical connections. Direct reading indication. Accuracy within 5 percent full scale. Relatively insensitive to shock and vibration. Materials: Polysulfone plastic body, piston and cone. Common parts are Spring: T300-series stainless, Indicator Ring: Buna N, Pressure Seals: Buna N, Fittings: C360 brass, Limit Indicators: Polypropylene, Retaining Ring: PH15 - 7MO stainless.

Manufacturer: PRM Brand: PRM Model: WM050SSPVX

1/2" NPT 304 STAINLESS STEEL WATER METER WITH PULSE OUTPUT; VITON SEALS Class: B Accuracy: Transitional Flow: ± 5% Nominal Flow: ± 2% Maximum Water Temperature: 104°F Maximum Water Pressure: 232 psi Mounting Orientation: Horizontal Materials: Body: 304 Stainless Steel, polyethylene Couplings: 304 Stainless Steel Measuring Chamber: Polyethylene Seal: Viton Mounting Orientation: Horizontal Not NSF certified

Manufacturer: Hedland Flow Meters Brand: Hedland Flow Meters

The EZ-View series flow meter is a rugged, low cost direct reading industrial class flow meter that is simple to install. It can be mounted (installed) in any position from vertical to horizontal without costly flow straighteners or other special plumbing. Constructed of high impact polysulfone plastic, the EZ-View product line offers excellent structural integrity and chemical compatibility with a wide range of industrial chemicals.Automatically signals alarm, if flow is too high or too lowModels available for AC or DC power supplyPolysulfone bodies for standard applicationsEasy to installEasy flow limit adjustmentRelatively insensitive to shock and vibrationWithin +/-1% repeatabilityLow cost+/-5% full scale accuracyLength includes end fittingDo not use pipe dopeUse Teflon tape onlyUse with plastic fittings only. Brand Name|Hedland#MFR Part Number|H621-716/H526-008-NO#UNSPSC|41112501#Item|Flow Meter#Type|Variable Area#Series|EZ-View, H621#Connection Size|1 Inch#Flow Rate|1 - 16 gpm#Pressure Rating|325 psi#Connection Type|NPTF Male#Maximum Viscosity|4.2 - 108 cSt#Mounting Type|All Position#Temperature Rating|32 - 250 deg F#Dimensions|5-1/4 Inch Length#Material|Polysulfone#Standard/Approvals|ANSI/ASME B1.20.1#Application|Automotive, Power Generation, Pulp and Paper, Municipal, Lube Oil Systems and OEM, For 0.876 Specific Gravity Oil Media

Manufacturer: UFM Brand: UFM

NEW UFM WVM40GLM-6-R2WD-C-5U 3/4IN NPT 0-40GPM FLOW METER 10-30V-DC D530781