Manufacturer: Hanna Instruments
Brand: Hanna Instruments
Model: PRIMO4
|
The Hanna Instruments Primo 4 is a conductivity tester for water quality applications, with automatic temperature compensation, automatic calibration, and automatic shutoff after five minutes of non-use. The meter is operated by a single button at the top of the meter. It has a cabled probe, which is useful for demonstrating before and after results of conditioning and filtration systems. Conductivity meters are commonly used in the water-quality testing, waste-water treatment, hydroponics, agriculture, and aquaculture industries, in cosmetics manufacturing, and in laboratory research.Specifications Range 0 to 10.00 mS/cm Resolution 0.01 mS/cm Accuracy + or - 2% Full Scale Calibration Automatic, at 5.00 mS/cm Temperature compensation Automatic, 0 to 60 degrees C (32 to 140 degrees F), temperature coefficient equal to 2% per degree C Power source Two 1.5V batteries (included) Dimensions (meter only)66 x 50 x 25mm / 2.6 x 2.0 x 1.0" (H x W x D) Weight (with probe)363g / 12.8oz  H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Conductivity meters, also known as electrical conductivity (EC) meters, measure the ability of a solution or material to conduct an electrical current. This measurement helps determine if the solution is, for example, contaminated or contains too much saline. In general, pure solutions, such as distilled water, have low conductivity. More saline- or nutrient-rich solutions, such as seawater or fertilizers, have high conductivity. Conductivity measurements are often used with total dissolved solids (TDS) measurements, which are typically expressed in ppm (parts per million). TDS consist of dissolved minerals and salts. To determine the amount of TDS, conductivity is measured, and the result is converted to a TDS measurement. Different meters provide results for conductivity, TDS, or both, and the application determines meter selection. Conductivity ...