Water Quality & Instrumentation - Page 648

Manufacturer: COLE-PARMER Brand: Cole-Parmer

science-lab-flowmeters

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon-Ubbelohde CUC-700 calibrated viscometer has a 20,000 to 100,000 centistokes (cSt) viscosity measuring range and is suitable for the measurement of transparent Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 100 centistokes per second (cSt/s) for calculating kinematic viscosity. The CUC-series size 700 viscometer uses a 254mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. It includes an ASTM International certificate of calibration. This viscometer is suited for use at temperatures above 93 degrees C (200 degrees F) or below -18 degrees C (0 degrees F) and meets the ASTM International D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, p...

Manufacturer: Hedland Flow Meters Brand: Hedland Flow Meters

The EZ-View series flow meter is a rugged, low cost direct reading industrial class flow meter that is simple to install. It can be mounted (installed) in any position from vertical to horizontal without costly flow straighteners or other special plumbing. Constructed of high impact polysulfone plastic, the EZ-View product line offers excellent structural integrity and chemical compatibility with a wide range of industrial chemicals.Simultaneously monitors in-line flow and pressureCompact and self-containedEasily carried in tool kit+/-5% full scale accuracy+/-1% repeatability0 - 160 psi with internal shock dampeners and blowout patch pressure gauge. Brand Name|Hedland#MFR Part Number|H623-107#UNSPSC|41112501#Item|Flow Meter#Type|Variable Area#Series|EZ-View, H623#Connection Size|1 Inch#Flow Rate|1 - 7 gpm#Pressure Rating|325 psi#Connection Type|NPTF Male x NPTF Female#Maximum Viscosity|4.2 - 108 cSt#Mounting Type|All Position#Temperature Rating|32 - 150 deg F#Dimensions|8-3/4 Inch Length x 3.3 Inch W x 3.3 Inch Height#Material|Polysulfone#Standard/Approvals|ANSI/ASME B1.20.1#Application|Automotive, Power Generation, Pulp and Paper, Municipal, Lube Oil Systems and OEM, For 0.876 Specific Gravity Oil Media

Manufacturer: PIUSI USA Brand: PIUSI Model: F00496A40

K600/3 LIGHT DIESEL Fluid Electronic Meter 2.64-26.4 gpm. Accuracy +/- .5%. Fluids: Oil and Light Diesel. Max working pressure 426 psi. IN/OUT connection 1"NPT. Weight 3.7 lb.

Manufacturer: Franke Foodservice Systems, Inc Brand: Franke Foodservice Systems, Inc

Franke Foodservice Systems, Inc 1558404 FLOW METER

Manufacturer: COLE-PARMER Brand: Cole-Parmer

All flowmeters come with correlation data sheets for water and air at standard temperature and pressure (STP). We can also supply calibration data for oxygen, nitrogen, hydrogen, helium, CO2, argon, other liquids and gases, and for conditions other than STP-call our Application Specialists for more information. Compact size makes these ideal for tight measuring areas Clear polycarbonate front shield magnifies scale 16%. A vertical tangential locator line ensures hairline accuracy in reading float position. Each flowmeter consists of a heavy-walled glass flowtube mounted in an anodized aluminum frame with white acrylic back plate (1/8' thick). Minimum flow rate is less than one tenth of the maximum flow value in the ordering table. Select a flowmeter with a high-precision valve for superior flow rate control-ideal for low-flow applications or for any application where you need precise flow control. The 16-turn high-precision valve features a nonrising stem to more accurately hit your desired set point.

Manufacturer: Unico Brand: Unico

UNICO Micro Cell Holder Kit for use with 10 mm microcuvettes SQ2800-106P is made to work with your UNICO SQ2800 series Spectrophotometer.

Manufacturer: Varsal, Inc. Brand: Varsal Model: 450-39B-G20

Varsal manufactures UV-VIS-NIR spectrophotometer cells and cuvettes, including micro-cells. Our unique fire-fused production technology assures long lasting, easy to clean, high performance cells. Varsal cells can be used with all commonly used spectrophotometers to measure absorbance or transmission and they comply with all international standards. Depending on the spectral range to be analyzed, Varsal spectrophotometer cells are available in optical glass, quartz and IR quartz glass. Our technical ability to produce cells that meet the demanding specifications of instrument manufacturers is only surpassed by Varsal's customer service and on-time delivery. Wavelength zone: 200/800 newton meters. Percentage transmission: >80%@360 newton meters. Matching tolerance: within 0.3%@360 newton meters

Manufacturer: COLE-PARMER Brand: Cole-Parmer

Select a flow rate/total display for use with flowmeters / transmitters. Note the signal-input requirements for each. Contact our Application Specialists for correct pairing. This low-power device operates from and existing 5 to 24 VDC source. View the 0.4" high digits in any flow unit combination to which the transmitter output signal is scaled. Panel cutout is 1.67"L x 0.92"H (x 1.00"D). The input signal is 0 to 5 VDC.

Manufacturer: Keysight Technologies Brand: KEYSIGHT TECHNOLOGIES Model: 34102A

The Keysight 34102A is a low-thermal input cable for the 34420A. It consists of a custom mating connector attached to a 1.2 m shielded 4-conductor cable terminated in copper spade lugs. It ships with the 34420A. The Keysight 34102A is only compatible with the Keysight 34420A.