Water Quality & Instrumentation - Page 689

Manufacturer: RPI, Corp. Brand: RPI

Highly stable and accurate readings with a large LCD display. Designed for simple one-hand operation. Automatically calibrates to pH 4, 7, 10 buffers and can be adjusted to recognize non-standard buffers as well. Features hold function, and auto power off with low battery indicator. The case is IP65 waterproof, and will float if accidentally dropped into the water. Comes with 4 button-cell batteries and a built-in electrode kept moist with a protective cap.

Manufacturer: YSI Brand: YSI Model: 605306

Kit includes bottle of electrolyte, 1 sanding disc and 6 screw-on cap membranes. 1.25mL PE membranes; yellow cap. Response time (T95 - from 0 to 100 percent) = 8 seconds. Flow dependence after 4 minutes = 25 percent. Required flow rate = 6 inches/second.

Manufacturer: Master Meter Brand: FA&M

3/4 Master Meter FAM Multijet Cold Water Meter with couplings. Gallons register with pulse output. Ideal for residential applications, these accurate and quiet operating meters, fit challenging inside sets - under counters, between studs, along pipes run against walls. Regardless of pipe angle, our patented design ensures the measuring chamber can always be positioned horizontally for maximum performance and accuracy. Retrofit without costly re-plumbing and discover submetering is a practical reality in locations where installation costs were previously thought to be cost-prohibitive.

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: PRIMO5-HANNA INSTRUMENTS_IT

The Hanna Instruments Primo 5 is a conductivity tester for water quality applications, with automatic temperature compensation, automatic calibration, and automatic shutoff after five minutes of non-use. The meter is operated by a single button at the top of the meter and has a direct probe connection. Conductivity meters are commonly used in the water-quality testing, waste-water treatment, hydroponics, agriculture, and aquaculture industries, in cosmetics manufacturing, and in laboratory research.Specifications Range 0 to 1999 μS/cm Resolution 1 mS/cm Accuracy + or - 2% Full Scale Calibration Automatic, at 1413 μS/cm Temperature compensation Automatic, 0 to 60 degrees C (32 to 140 degrees F), temperature coefficient equal to 2% per degree C Power source Two 1.5V batteries (included) Dimensions (meter only)180 x 50 x 25 mm / 7.1 x 2.0 x 1.0 inches (H x W x D) Weight 227g / 8oz  H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Conductivity meters, also known as electrical conductivity (EC) meters, measure the ability of a solution or material to conduct an electrical current. This measurement helps determine if the solution is, for example, contaminated or contains too much saline. In general, pure solutions, such as distilled water, have low conductivity. More saline- or nutrient-rich solutions, such as seawater or fertilizers, have high conductivity. Conductivity measurements are often used with total dissolved solids (TDS) measurements, which are typically expressed in ppm (parts per million). TDS consist of dissolved minerals and salts. To determine the amount of TDS, conductivity is measured, and the result is converted to a TDS measurement. Different meters provide results for conductivity, TDS, or both, and the application determines meter selection. Conductivity meters are used in research laboratories and a variety of industries, such as water-quality ...

Manufacturer: Reed Brand: REED Instruments Model: R9600

This salinity (salt) refractometer shows the concentration (percentage) of dissolved salt in water with 2 to 3 drops of a sample. The R9600 can be used to verify and measure salt concentrations in aquariums, holding tanks and breeding ponds.

Manufacturer: Varsal, Inc. Brand: Varsal Model: 450-317-G40

Varsal manufactures UV-VIS-NIR spectrophotometer cells and cuvettes, including micro-cells. Our unique fire-fused production technology assures long lasting, easy to clean, high performance cells. Varsal cells can be used with all commonly used spectrophotometers to measure absorbance or transmission and they comply with all international standards. Depending on the spectral range to be analyzed, Varsal spectrophotometer cells are available in optical glass, quartz and IR quartz glass. Our technical ability to produce cells that meet the demanding specifications of instrument manufacturers is only surpassed by Varsal's customer service and on-time delivery. Wavelength zone: >800 newton meters. Percentage transmission: >80%@2730 newton meters. Matching tolerance: within 0.3%@2730 newton meters

Manufacturer: Milwaukee Brand: Milwaukee

Milwaukee ATC Refractometer is not only temperature compensated but allows for low level readings and fine resolution. It yields precise low level readings to ensure proper salt content.

Manufacturer: NMT Brand: Versamag

3/4 NMT Versamag Polymer Multijet Hot Water Meter with Couplings. Gallons register with pulse output. For use in submetering applications where compact size and pulse output are desired. The NMT Versamag multi-jet water meter uses a polymer body design to allow for low weight and reduced cost. The NMT Versamag may be installed either horizontally or vertically. The NVMP-5834H Versamag Hot Water Meter is rated for hot water up to 160 degrees F.

Manufacturer: BAYM Electric Co., Ltd Brand: BAYM Model: BM-1.5 Flowmeter

The modular designed can be used in conjunction with output module, sensor and remote transmitter. Good repeatability and strong stability, unique LCD (LCD)count, you can reset the 5 bit (9999.9) single oil volume, a cumulative total of 6 bits are not cleared. The accuracy ofthe positive and the negative is less than or equal to 1%the repeatability error of less than 2% units of measurement for (/L, /GAL /QTS a gallon, quart, pint (PTS)switch freely is the rise in domestic basic, easy to use), two keys (CALIBRATE DISPLAY) with the use of simple and easy to operate! NOTE: This meter can be normally use should meet two conditions: 1.work environment requires an oil pump or water pump above 0.1mA pressure 2.the working environment needs the flow above 10 liters per minute It can not be used to measure the small flow and water And it only can measure diesel oil,gasolene,carbinol and other liquid

Manufacturer: Flomec Flow Meters Brand: Flomec Flow Meters

Flomec rotor kit for use with G2 series industrial turbine flow meters. Brand Name|Flomec#MFR Part Number|125500-1#UNSPSC|41112501#Item|Rotor Kit#Suitable For Use With|G2 Series Industrial Turbine Flow Meters#Specifications|1/2 Inch#Includes|Rotor, Supports and Retaining Rings