Calibration - Page 296

Manufacturer: Fluke Corporation Brand: Fluke Model: PM9093/001

Male BNC to dual female BNC T-piece. Set consists of two adapters. BB120 Shielded Banana to BNC Adapter is required to adapt to ScopeMeter 120 series shielded banana jack inputs. Maximum signal voltage: 300V rms. Maximum voltage to ground: 600V rms. CAT III per IEC 61010-031.

Manufacturer: Fluke Corporation Brand: Fluke Model: PM9093/001

Male BNC to dual female BNC T-piece. Set consists of two adapters. BB120 Shielded Banana to BNC Adapter is required to adapt to ScopeMeter 120 series shielded banana jack inputs. Maximum signal voltage: 300V rms. Maximum voltage to ground: 600V rms. CAT III per IEC 61010-031.

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 8902-0195

HHIP 85-95 hrb Rockwell standard Test block can be used with 8902-0150 hardness Tester and most other imported hardness testers.

Manufacturer: Flexbar Brand: Flexbar

Short Shank Inspection Balls. Premium Quality. Excellent for inspection Applications Such As Coordinate Measuring Machines One-piece construction. High Finish Concentricity of Ball to shank - .0001" T.I.R. Model No. 10602, Short Shank inspection

Manufacturer: United Scientific Supplies Brand: United Scientific Supplies Model: 77740

These stainless steel weights are designed for exercises and experiments in weighing and measuring. Hooked weights (also called hanging weights) can be used with balances, scales, or with a spring or pulley system to demonstrate basic principles of physics, including exercises demonstrating the laws of friction, tension, and acceleration. This 9 piece set includes 1 each of 5g, 10g, 50g, 100g, 500g, and 2 each of 20g and 200g weights. Each weight is made of high quality stainless steel and is individually calibrated. A plastic storage block is included to help keep the weights clean, organized, and protect them from damage. Science education products incorporate applied math and science principles into classroom and homeschool-based projects. Teachers in pre-K, elementary, and secondary classrooms use science education kits and products alongside science, technology, engineering, and math (STEM) curriculum to demonstrate STEM concepts and real-world applications through hands-on activities. Science education projects include a broad range of activities, such as practical experiments in engineering, aeronautics, robotics, energy, chemistry, physics, biology, and geology.

Manufacturer: HHIP Brand: HHIP Model: 4101-0983

2.000" Square Gage Block Grade AS-0 (2) Block is supplied with a manufacturer's certificate. 1/4" diameter hole. Tolerance is +.000008/-.000005".

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 3900-3004

HHIP Precision parallel set includes 3/16" x 1" x 6", 3/16" x 1-1/4" x 6", 3/16" x 1-1/2" x 6", 3/16" x 1-3/4" x 6" size. Made from fine qualify tool steel stress relieved against distortion, precision ground and hardened. These precision parallels are recommended for layout work, standards and set up. The holes are designed for easier handling and set ups. Hardness: case hardened RC 55 to 62 on 2 sides, top and bottom only. Complete with fitted durable plastic case. Tolerance: Parallel To 0.0003 on 2 sides, top and bottom. Dimensions: within 0.001" allowance.

Manufacturer: Hexagon Metrology Brand: Standard Gage

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 613671-541

The Mitutoyo grade AS-1 rectangular gage block is made of ceramic, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for manufacturing gage applications. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)] units, and is indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Jo...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 614671-541

The Mitutoyo grade AS-1 square gage block is made of steel, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. The grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for manufacturing gage applications. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in metric [millimeter (mm)] units, and is indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 24.1 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke...