|
|
-
4.8 of 5.0 with 22 Reviews
SALE PRICE: $35.36
Manufacturer: Troemner
Brand: Troemner
Model: 1316
Manufacturer: Troemner
Brand: Troemner
Model: 1316
200 G Class F Test weight
-
4.8 of 5.0 with 27 Reviews
SALE PRICE: $37.07 1% OFF
Manufacturer: LK Industries
Brand: L-K Industries
Model: J-050E
Manufacturer: LK Industries
Brand: L-K Industries
Model: J-050E
Collars, shields, and cushions are required for proper use of lk's centrifuges. Convenient packages are available for purchase.
-
4.8 of 5.0 with 37 Reviews
SALE PRICE: $38.50 1% OFF
Manufacturer: Generic
Brand: Generic
Manufacturer: Generic
Brand: Generic
Contents include: 1 Pair 1" x 6"x 3/16" 1 Pair 1-1/4" x 6" x 3-1/6" 1 Pair 1-1/2" x 6" x 1/2" 1 Pair 1-3/4" x 6" x 1/2" **Weight:9.45lbs (roughly)***
-
4.8 of 5.0 with 10 Reviews
SALE PRICE: $39.95
Manufacturer: Anytime Tools
Brand: Anytime Tools
Manufacturer: Anytime Tools
Brand: Anytime Tools
Professional Grade Precision Tool Angle blocks are a valuable tool for the alignment and measurement of precise angles. They can also be stacked to create other angles. Precision-ground, steel construction. Features: 10 Blocks: 1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30° Accuracy +/-20 seconds, 0.0001" per inch. Hardened steel Rockwell HRC 55 3" long x 1/4" thick Includes padded fitted case
-
4.8 of 5.0 with 3 Reviews
SALE PRICE: $39.99 1% OFF
Manufacturer: ABS Import Tools
Brand: HHIP
Manufacturer: ABS Import Tools
Brand: HHIP
TOLERANCE: PARALLEL TO 0.0003 ON 2 SIDES, TOP AND BOTTOM. | DIMENSIONS: WITHIN 0.001"ALLOWANCE. | 3/16", 4 PAIR SET | Made from fine quality tool steel stress relieved against distortion, precision ground and hardened. | These precision parallels are reco
-
4.8 of 5.0 with 44 Reviews
SALE PRICE: $40.00 1% OFF
Manufacturer: Generic
Brand: Generic
Manufacturer: Generic
Brand: Generic
contents include:
-(2) 1/2''
-(2) 5/8''
-(2) 3/4''
-(2) 7/8''
-(2) 1''
-(2) 1-1/8''
-(2) 1-1/4''
-(2) 1-3/8''
-(2) 1-1/2''
-
4.8 of 5.0 with 45 Reviews
SALE PRICE: $44.65 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611152-521
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611152-521
|
The Mitutoyo grade 00 rectangular gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in manufacturing industri...
-
4.8 of 5.0 with 16 Reviews
SALE PRICE: $44.97 1% OFF
Manufacturer: ABS Import Tools
Brand: HHIP
Manufacturer: ABS Import Tools
Brand: HHIP
Grade AS-0 (2) | Each block is supplied with a manufacturer's certificate
-
4.8 of 5.0 with 26 Reviews
SALE PRICE: $45.00 7% OFF
Manufacturer: Ohaus
Brand: Ohaus
Model: 80780318
Manufacturer: Ohaus
Brand: Ohaus
Model: 80780318
|
The Ohaus metric, stainless steel calibration weight meets International Organization of Legal Metrology (OIML) Class F1 specifications and designed for calibrating other weights, or electronic balances and scales. The weight is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. The weight meets OIML R111 Class F1 specifications for use calibrating high-precision top loading balances with a readability as low as 0.01g to 0.001g.The National Voluntary Laboratory Accreditation Program (NVLAP) accredits laboratories for compliance with ISO/IEC 17025 on the basis of their ability to meet the technical requirements set forth in NIST Handbook 150-2, and can provide accreditation to ANSI/NCSL Z540-1-1994. NVLAP calibrations and certifications meet all ISO, FDA, GMP, GLP, DOD, ANSI/NCSL Z540-1 and Nuclear requirements and are traceable to NIST. Procedures and processes used to generate this multi-page certificate, as well as its format and content, are prescribed by NVLAP. The document contains customer name & address, date of calibration, equipment and standards used in the calibration, accuracy class, true mass value (mass in a vacuum), “As Found†mass correction (for recalibration), “As Left†mass correction, uncertainty of measurement process (uncertainty to tolerance ratios are guaranteed), environmental conditions during test, construction and density of the weight, calibration procedure, and a statement of traceability to NIST. Mutual recognition arrangements include The International Laboratory Accreditation Cooperation (ILAC), The Asia Pacific Laboratory Accreditation Cooperation (APLAC) and The National Cooperation for Laboratory Accreditation (NACLA). Calibration weights are used to measure the weight or mass of an object using a balance or scale, or to calibrate other weights or instruments. Calibration weights can be certified or uncertified. Certified weights meet strict guidelines for accuracy and can usually be recertified. Certi...
-
4.8 of 5.0 with 34 Reviews
SALE PRICE: $45.30 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613105-551
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613105-551
|
The Mitutoyo grade AS-2 rectangular gage block is made of ceramic, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade AS-2 gage block is commonly used in workshops for calibrating and inspecting mounting tools and cutters. It is made of ceramic which resists corrosion, abrasion, and burrs, can withstand high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in manufacturing industries. They are commonly made of precision-ground steel, ceramic, or carbide mater...
|
|